Westinghouse 7254635 Handleiding

Westinghouse Ventilator 7254635

Lees hieronder de 📖 handleiding in het Nederlandse voor Westinghouse 7254635 (16 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

SAA-Havanna-Australia-WH18

OWNER'S MANUAL

Please write model number here for future reference: /

7254635

LED Module#: SMJD-3V16W2P3

Havanna

Net Weight: KGS

240V~50Hz

SAA-Havanna-Australia-WH18

Proceed with caution. Read all instructions before beginning the installation.

Only an authorized electrician should execute the installation.

The installation height, i.e. the distance between the blades and the floor, should be at least 2.3 m.

Always maintain the distance between the lamp and inflammable materials (curtains, wall, etc.), as indicated on the pictogram.

Make sure the fan is securely fastened at the ceiling.

WARNING! Do not use a dimmer type switch to control the fan speed.

WARNING! To prevent injuries, make sure the blades are not bent and that there are no objects with in the area of rotation.

WARNING! Due to European safety regulations, if the flush mount option is elected, the fan must not be re-installed utilizing the downrod.

If attempted, this may cause a serious injury. When assembling the fan, please follow your local safety regulations.

WARNING: Do Not use this fan in the same room at the same time as a gas or fuel burning fire, unless the flue has been tested under these conditions of use by a competent person.

10.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user mainte

nance shall not be made by children without supervision.

11.

Suitable for use indoors.

12.

Before disassembling light kit, make sure the power supply is disconnected from the main supply. Power supply can be on only after installation is completed.

13.

The lampshade should not be removed from the light bulb when the power supply is on.

14.

Replacement of light bulb is only possible when the light kit has cooled down, and the power supply is disconnected from the main supply.

15.

Make sure the lampshade is in the fixed position when operating the product.

16.

Means for all poles disconnection having a contact separation that provide full disconnection under over voltage category III conditions must be incorporated in the fixed wiring in

accordance with national wiring rules.

17.

IP20 The fan is designed for indoor use. It is not designed for installation in a bathroom or any damp area. Please ensure that the lamp does not come into contact with water.

18.

WARNING: If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact the manufacturer, its service agent or suitably qualified persons.

19.

The replacement of parts of the safety suspension system device shall be performed by the manufacturer, its service agent or suitably qualified persons.

20.