Westinghouse 7205435 Handleiding

Westinghouse Ventilator 7205435

Lees hieronder de 📖 handleiding in het Nederlandse voor Westinghouse 7205435 (20 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

SAA-Alta Vista-Australia-WH18

OWNER'S MANUAL

Alta Vista

Please write model number here for future reference: /

7205435

LED Module#: SMJD-3V16W2P3

Net Weight: KGS

240V~50Hz

SAA-Alta Vista-Australia-WH18

Proceed with caution. Read all instructions before beginning the installation.

Only an authorized electrician should execute the installation.

The installation height, i.e. the distance between the blades and the floor, should be at least 2.3 m.

Always maintain the distance between the lamp and inflammable materials (curtains, wall, etc.), as indicated on the pictogram.

Make sure the fan is securely fastened at the ceiling.

WARNING! Do not use a dimmer type switch to control the fan speed.

WARNING! To prevent injuries, make sure the blades are not bent and that there are no objects with in the area of rotation.

WARNING! Due to European safety regulations, if the flush mount option is elected, the fan must not be re-installed utilizing the downrod.

If attempted, this may cause a serious injury. When assembling the fan, please follow your local safety regulations.

WARNING: Do Not use this fan in the same room at the same time as a gas or fuel burning fire, unless the flue has been tested under these conditions of u

10.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experienc

given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appl

nance shall not be made by children without supervision.

11.

Suitable for use indoors.

12.

Before disassembling light kit, make sure the power supply is disconnected from the main supply. Power supply can be on only after installation is comple

13.

The lampshade should not be removed from the light bulb when the power supply is on.

14.

Replacement of light bulb is only possible when the light kit has cooled down, and the power supply is disconnected from the main supply.

15.

Make sure the lampshade is in the fixed position when operating the product.

16.

Means for all poles disconnection having a contact separation that provide full disconnection under over voltage category III conditions must be incorpora

accordance with national wiring rules.

17.

IP20 The fan is designed for indoor use. It is not designed for installation in a bathroom or any damp area. Please ensure that the lamp does not come into

18.

WARNING: If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact the manufacturer, its service agent or suitably

19.

The replacement of parts of the safety suspension system device shall be performed by the manufacturer, its service agent or suitably qualified persons.

20.

The fixing means for attachment to the ceiling can be fixed with a sufficient strength to withstand 4 times the weight of the ceiling fan.

21.

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

TOOLS REQUIRED