Wells MOD100TD Handleiding

Wells Warmhoudplaat MOD100TD

Lees hieronder de 📖 handleiding in het Nederlandse voor Wells MOD100TD (24 pagina's) in de categorie Warmhoudplaat. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OWNERS MANUAL

BUILT-IN

SINGLE WELL

MODULAR

WARMERS

with

THERMOSTAT & DIGITAL

ELECTRONIC CONTROL

MODELS

MOD100T, TD, TDWA

MOD100E, ED, HE

MOD100HT, HTD

MOD127TD, TDWA

Includes

INSTALLATION

USE & CARE

EXPLODED VIEW

PARTS LIST

WIRING DIAGRAM

011C

2M-308017 Rev. (B) M011C.01 120312

MOD100T

equipment manufactured by Wells Manufacturing is

warranted against defects in materials and workmanship

for a period of one year from the date of original installation

or 18 months from the date of shipment from our factory,

whichever comes rst, and is for the benet of the original

purchaser only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW

OR IN FACT, INCLUDING BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE, AND/OR FOR

DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH WELLS MANUFACTURING. This

warranty is void if it is determined that, upon inspection

by an authorized service agency, the equipment has

been modied, misused, misapplied, improperly installed,

or damaged in transit or by re, ood or act of God. It

also does not apply if the serial nameplate has been

removed, or if service is performed by unauthorized

for its products are based upon the limitations in this

warranty. Seller’s obligation under this warranty is

limited to the repair of defects without charge by a Wells

Manufacturing factory authorized service agency or one of

its sub-service agencies. This service will be provided on

customer’s premises for non-portable models. Portable

models (a device with a cord and plug) must be taken

or shipped to the closest authorized service agency,

transportation charges prepaid, for service. In addition to

restrictionscontained in this warranty, specic limitations are

shown in the Service Policy and Procedure Guide. Wells

Manufacturing authorized service agencies are located in

principal cities. This warranty is valid in the United States

and Canada and void elsewhere. Please consult your

classied telephone directory, your foodservice equipment

dealer or contact:

Wells Manufacturing

10 Sunnen Dr., St. Louis MO 63143 USA

phone (314) 781-2777 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment

in this shipment was carefully inspected and packaged

by skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. Be certain that any VISIBLE LOSS OR DAMAGE:

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. if damage isCONCEALED LOSS OR DAMAGE:

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and le

“CONCEALED DAMAGE” claim with them. This

should be done within fteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells Manufacturing cannot assume liability for damage or

loss incurred in transit. We will, however, at your request,

supply you with the necessary documents to support your

claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase

other than specied on equipment nameplates are

not covered by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements

and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and, normal

maintenance functions including adjustments of

thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are covered by this warranty.not

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility. Those

miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted

for ninety (90) days from date of purchase on non-

warranty equipment. This parts warranty is limited only

to replacement of the defective part(s). use of Any

non-genuine voids any Wells parts completely

warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus covered by this not

warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability to

perform service are covered by warranty. This not

includes institutional and correctional facilities.

2M-308017-011C Built-In Single Well Modular Warmer w/T-Stat Control

WARRANTY xi

FEATURES & OPERATING CONTROLS 2

PRECAUTIONS & GENERAL INFORMATION 3

AGENCY LISTING INFORMATION 3

INSTALLATION 4

OPERATION 6

MAINTENANCE INSTRUCTIONS 7

CLEANING INSTRUCTIONS 8

TROUBLESHOOTING SUGGESTIONS 10

EXPLODED VIEW & PARTS LIST 12-16

WIRING DIAGRAM 17

PARTS & SERVICE 20

CUSTOMER SERVICE DATA 21

Thank You for purchasing this Wells Manufacturing appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it

gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for the

appliance in a manner which will ensure its optimum performance.

TABLE OF CONTENTS

INTRODUCTION

SPECIFICATIONS

MODEL VOLTS AMPS WATTS POWER SUPPLY

CORD

MOD100T,

MOD100TD

120 VAC 1ø 13.8A 1600W

NOT SUPPLIED208 VAC 1ø 6.0A 1240W

240 VAC 1ø 6.9A 1600W

MOD127TD

208 VAC 1ø 6.0A 1240W

NOT SUPPLIED

240 VAC 1ø 6.9A 1600W

Product specificaties

Merk:	Wells
Categorie:	Warmhoudplaat
Model:	MOD100TD

Heb je hulp nodig?

Als je hulp nodig hebt met Wells MOD100TD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Warmhoudplaat Wells

Wells SS8TD Handleiding

24 Juni 2023

Wells SS206 Handleiding

19 Juni 2023

Wells SS206TU Handleiding

16 Juni 2023

Wells MOD100 Handleiding

13 Juni 2023

Wells SS10T Handleiding

10 Juni 2023

Wells BMW206STDL120 Handleiding

9 Juni 2023

Wells SS206ERD Handleiding

8 Juni 2023

Wells SS10TD Handleiding

7 Juni 2023

Wells SS8TDU Handleiding

27 Mei 2023

Wells SMPTD27 Handleiding

21 Mei 2023

Handleiding Warmhoudplaat

Nieuwste handleidingen voor Warmhoudplaat

Royal Catering RCWS-160S Handleiding

14 November 2024

Royal Catering RCHT-1200B Handleiding

14 November 2024

Royal Catering RCHT-850 Handleiding

14 November 2024

Bartscher BW10 Handleiding

6 November 2024

Royal Catering RC-SHSFL09 Handleiding

14 Oktober 2024

Hendi 238868 Handleiding

21 September 2024

Rommelsbacher WPR 307/E Handleiding

18 Augustus 2024

Salton ICS2146 Handleiding

20 Juli 2024

Salton TWT30 Handleiding

19 Juli 2024

Salton SMW2094BKW Handleiding

19 Juli 2024