Wells HC225 Handleiding

Wells Fornuis HC225

Lees hieronder de đź“– handleiding in het Nederlandse voor Wells HC225 (24 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 121 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
223
p/n Rev. D M223 01202M-303755 12
OWNERS MANUAL
for
COUNTERTOP
CERAMIC
HOTPLATES
Models:
HC100
HC125
HC225
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
Model HC225
223 p/n 2M-303755 Owners Manual Counter Top Ceramic Hotplates
equipment manufactured by WELLS MANUFACTURING is
warranted against defects in materials and workmanship
for a period of one year from the date of original installation
or 18 months from the date of shipment from our factory,
whichever comes îšżrst, and is for the beneîšżt of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW
OR IN FACT, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE, AND/OR FOR
DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES
IN CONNECTION WITH WELLS PRODUCTS. This
warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modiîšżed, misused, misapplied, improperly installed, or
damaged in transit or by re, ood or act of God. It also
does not apply if the serial nameplate has been removed,
or if service is performed by unauthorized personnel. The
based upon the limitations in this warranty. Seller’s obligation
under this warranty is limited to the repair of defects without
charge by a Wells Manufacturing factory authorized service
agency or one of its sub-service agencies. This service
will be provided on customer’s premises for non-portable
models. Portable models (a device with a cord and plug)
must be taken or shipped to the closest authorized service
agency, transportation charges prepaid, for service. In
addition to restrictions contained in this warranty, speciîšżc
limitations are shown in the Service Policy and Procedure
Guide. Wells Manufacturing authorized service agencies are
located in principal cities. This warranty is valid in the United
States and Canada and void elsewhere. Please consult your
classiîšżed telephone directory, your foodservice equipment
dealer or contact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and îšżle
“CONCEALED DAMAGE” claim with them. This
should be done within îšżfteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than speciîšżed on equipment nameplates are not
covered by this warranty. Conversion to correct voltage
and/or phase must be the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing
and cleaning schedules, are customer responsibility.
Those miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted
for ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability
to perform service are not covered by warranty. This
includes institutional and correctional facilities.
223 p/n 2M-303755 Owners Manual Counter Top Ceramic Hotplates
3
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
INSTALLATION 4
OPERATION 5
CLEANING INSTRUCTIONS 6
SPECIAL CARE INSTRUCTIONS 7
TROUBLESHOOTING 8
EXPLODED VIEW & PARTS LIST 9-14
WIRING DIAGRAM 15-16
PARTS & SERVICE 21
CUSTOMER SERVICE DATA 21
Thank You for purchasing this
Wells Manufacturing appliance
Proper installation, professional
operation and consistent
maintenance of this equipment
will ensure that it gives you the
very best performance and a long,
economical service life.
This manual contains the
information needed to properly
install this equipment, and to use
and care for the equipment in
a manner which will ensure its
optimum performance.
TABLE OF CONTENTS
SPECIFICATIONS
MODEL ELEMENT WIDTH DEPTH VOLTS AMPS PLUG LEG HEIGHT kW
HC100 Single 7” 12-5/8” 12-5/8” 120 V 11.7 A 1.4 kW NEMA 5-15P 1”
HC125 Single 9” 14-3/4” 14” 208 V 1ø 1.9 kW NEMA 6-15P 1”9.0 A
240 V 1ø 2.5 kW NEMA 6-15P 1”10.4 A
HC225 Dual 9” 14-3/4” 24-5/8” 208 V 1ø 3.8 kW NEMA 6-30P 1”18.1 A
240 V 1ø 5.0 kW NEMA 6-30P 1”20.8 A
SPECIFICATIONS - EXPORT MODELS
MODEL ELEMENT WIDTH DEPTH VOLTS LEGS AMPS kW
HC125EU Single 9” 14-3/4” 14” 220-240V 1ø 10.4 A 2.5 kW 1”
HC225EU Dual 9” 14-3/4” 24-5/8” 220-240V 1ø 20.8 A 5.0 kW 1”
Refer to the Export Manual for this equipment (p/n 2M-301399) for speciîšżc information.

Product specificaties

Merk: Wells
Categorie: Fornuis
Model: HC225

Heb je hulp nodig?

Als je hulp nodig hebt met Wells HC225 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Fornuis Wells

Wells

Wells H63 Handleiding

29 Juni 2023
Wells

Wells H2412G Handleiding

17 Juni 2023
Wells

Wells HDHP3630G Handleiding

12 Juni 2023
Wells

Wells HC1256 Handleiding

11 Juni 2023
Wells

Wells H33 Handleiding

4 Juni 2023
Wells

Wells HC1006- Handleiding

3 Juni 2023
Wells

Wells H636 Handleiding

30 Mei 2023
Wells

Wells H115 Handleiding

26 Mei 2023
Wells

Wells HDHP2430G Handleiding

25 Mei 2023
Wells

Wells H336 Handleiding

25 Mei 2023

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis

Royal Catering

Royal Catering RCES-60/650-4B Handleiding

24 December 2024
Arcelik

Arcelik OCD T 601-1 EHB Handleiding

24 December 2024
Arcelik

Arcelik OCD T 601-1 ES Handleiding

24 December 2024
Kaiser

Kaiser KG 6357 Turbo Handleiding

24 December 2024
Kaiser

Kaiser KCG 6387 Turbo Handleiding

24 December 2024
Kaiser

Kaiser KCG 3382 Handleiding

24 December 2024
Kaiser

Kaiser KCG 6380 W Turbo Handleiding

23 December 2024
Kaiser

Kaiser KCG 9386 Turbo Handleiding

23 December 2024
Kaiser

Kaiser KCG 4384 Turbo Handleiding

23 December 2024
Royal Catering

Royal Catering RCGG-40/700CS Handleiding

23 December 2024