Wells H706 Handleiding

Wells Fornuis H706

Lees hieronder de 📖 handleiding in het Nederlandse voor Wells H706 (20 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/20
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomeld.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OWNERS MANUAL
for
BUILT-IN
ELECTRIC
HOTPLATES
Models:
H336, H636 and
H706
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
222
p/n Rev. D M222 2M-303734 110121
Model H336
Model H706
222 p/n 2M-303734 Owners Manual Built-In Hotplates
Unless otherwise specied, all commercial cooking
equipment manufactured by Wells Manufacturing is
warranted against defects in materials and workmanship
for a period of one year from the date of original installation
or 18 months from the date of shipment from our factory,
whichever comes rst, and is for the benet of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW
OR IN FACT, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE, AND/OR FOR
DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH WELLS BLOOMFIELD PRODUCTS.
This warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modied, misused, misapplied, improperly installed, or
damaged in transit or by re, ood or act of God. It also
does not apply if the serial nameplate has been removed,
or if service is performed by unauthorized personnel. The
prices charged by Wells Manufacturing for its products are
based upon the limitations in this warranty. Seller’s obligation
under this warranty is limited to the repair of defects without
charge by a Wells Manufacturing factory authorized service
agency or one of its sub-service agencies. This service will
be provided on customer’s premises for non-portable models.
Portable models (a device with a cord and plug) must be
taken or shipped to the closest authorized service agency,
transportation charges prepaid, for service. In addition to
restrictions contained in this warranty, specic limitations are
shown in the Service Policy and Procedure Guide. Wells
Manufacturing authorized service agencies are located in
principal cities. This warranty is valid in the United States and
Canada and void elsewhere. Please consult your classied
telephone directory, your foodservice equipment dealer or
contact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. Be certain that any VISIBLE LOSS OR DAMAGE:
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and le
“CONCEALED DAMAGE” claim with them. This
should be done within fteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specied on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items , tosubject to normal wear
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are covered by this warranty.not
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to from an sixty (60) miles
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted
for ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). use of Any
non-genuine voids anyWells parts completely
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus covered by this not
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are covered by warranty. This not
includes institutional and correctional facilities.
222 p/n 2M-303734 Owners Manual Built-In Hotplates
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY APPROVAL INFORMATION 3
INSTALLATION 4
OPERATION 5
CLEANING INSTRUCTIONS 6
TROUBLESHOOTING 7
EXPLODED VIEW & PARTS LIST 8
PARTS & SERVICE 12 - 17
WIRING DIAGRAM 18 - 19
CUSTOMER SERVICE DATA 19
TABLE OF CONTENTS
SPECIFICATIONS
Proper installation, professional operation and consistent maintenance of this equipment will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this equipment, and to use and care for
the equipment in a manner which will ensure its optimum performance.
INTRODUCTION
1
MODEL ELEMENT VOLTS AMPS kW *DIMENSIONS
H336 Single 8” Coil 208 V 1ø 9.4 A 2.0 kW 10” outside diameter
240 V 1ø 10.8A 2.6 kW
H636 Dual 8” Coils 208 V 1ø 18.8 A 3.9 kW 14-3/4” W x 23-1/2” D
240 V 1ø 21.7 A 5.2 kW
H706 Dual 9” french plates 208 V 1ø 14.4 A 3.0 kW 14-3/4” W x 23-1/2” D
240 V 1ø 16.7 A 4.0 kW
Refer to Installation Instructions for cutout dimensions.

Product specificaties

Merk: Wells
Categorie: Fornuis
Model: H706

Heb je hulp nodig?

Als je hulp nodig hebt met Wells H706 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Fornuis Wells

Wells

Wells H63 Handleiding

29 Juni 2023
Wells

Wells H2412G Handleiding

17 Juni 2023
Wells

Wells HDHP3630G Handleiding

12 Juni 2023
Wells

Wells HC1256 Handleiding

11 Juni 2023
Wells

Wells H33 Handleiding

4 Juni 2023
Wells

Wells HC1006- Handleiding

3 Juni 2023
Wells

Wells H636 Handleiding

30 Mei 2023
Wells

Wells H115 Handleiding

26 Mei 2023
Wells

Wells HDHP2430G Handleiding

25 Mei 2023
Wells

Wells H336 Handleiding

25 Mei 2023

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis

Asko

Asko HIHD854GF Handleiding

4 December 2024
Asko

Asko HG1935 Handleiding

4 December 2024
Teka

Teka TC 6400 Handleiding

4 December 2024
Teka

Teka IRC 9430 KS Handleiding

4 December 2024
Teka

Teka EW 90 5G AI AL TR Handleiding

4 December 2024
Teka

Teka EH 60 4G AI AL TR Handleiding

4 December 2024
Bauknecht

Bauknecht CHR 6642 IN Handleiding

3 December 2024
Orbegozo

Orbegozo FO 6200 Handleiding

3 December 2024
Whirlpool

Whirlpool TGML 660 NB Handleiding

3 December 2024
Whirlpool

Whirlpool WB S0060 NE Handleiding

3 December 2024