VTech CS6649-2 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor VTech CS6649-2 (4 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
You can choose to connect the telephone base for
desktop usage or wall mounting.
NOTES
Use only the adapters provided.
Make sure the electrical outlets are not controlled by
wall switches.
The adapters are intended to be correctly oriented in
a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into
a ceiling, under-the-table or cabinet outlet.
TIP
If you subscribe to digital subscriber line (DSL)
high-speed Internet service through your telephone
line, make sure you install a (not included)
between the telephone line cord and telephone wall
jack. Contact your DSL service provider for more
information.
•
•
•
•
Your telephone package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
DECT 6.0 cordless telephone
Abridged user’s manual
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
CS6648-2
CS6648-3
CS6648-4
CS6649
CS6649-2
CS6649-3
BC
on purchasing your new VTech product. Before
using this telephone, please read
.
This abridged user’s manual provides you with
basic installation and use instructions. A limited set
of features are described in abbreviated form.
Please refer to the online User’s manual for a full
set of installation and operation instructions at
www.vtechphones.com.
Telephones identified with this logo
have reduced noise and interference
when used with most T-coil equipped
hearing aids and cochlear implants.
The TIA-1083 Compliant Logo is a
trademark of the Telecommunications
Industry Association. Used under
license.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
1 set for CS6649;
2 sets for CS6648-2/CS6649-2;
3 sets for CS6648-3/CS6649-3
4 sets for CS6648-4
Abridged
user’s
manual
1 set for CS6648-2/CS6649-2;
2 sets for CS6648-3/CS6649-3
3 sets for CS6648-4
Important
safety
instructions
On when the phone is in use, or when the
answering system is answering a call.
On when a handset is being registered.
Flashes when there is an incoming call.
Flashes when handsets are being deregistered.
Flashes when another telephone on the
same line is in use.
Answer an incoming call when you receive a
call waiting alert.
Return to the previous menu or idle mode
without making changes.
Press and hold to erase the missed call
indicator when the phone is not in use.
While the phone is ringing, press to silence
the base ringer temporarily.
Review the caller ID log when the telephone
is not in use.
Scroll down while in a menu, or in the
directory, caller ID log or redial list.
Move the cursor to the left when entering
numbers or names.
Decrease the listening volume during a call
or message playback.
Review the directory when the phone is not
in use.
Scroll up while in a menu, or in the directory,
caller ID log or redial list.
Move the cursor to the right when entering
numbers or names.
Increase the listening volume during a call or
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
message playback.
Show a menu.
While in a menu, press to select an item, or
save an entry or setting.
Press to initiate or answer an intercom call,
or to transfer a call.
Press to page all handsets when the
phone is not in use.
Press to start or stop message playback.
Flashes when there are new messages or
memos in the answering system.
Press to delete the playing message or
playing announcement.
While reviewing the redial list, directory or
caller ID log, press to delete an individual
entry.
While entering names or numbers, press to
delete a character or digit.
Press once to repeat the playing message.
Press twice to play the previous message.
Press to skip to the next message.
Mute the microphone during a call.
Silence the base ringer temporarily while
the phone is ringing.
Adjust the listening volume.
Adjust the telephone base ringer volume.
Press to turn the built-in answering system
on or off.
Review the redial list.
Press repeatedly to view the last 10
numbers dialed.
Press and hold to insert a dialing pause
while dialing or entering numbers.
Press to make, answer or end a call.
During a call, press to switch between
the corded handset and the base
speakerphone.
Press and hold to set and turn on the quiet
mode, or turn it off.
Press repeatedly to display other dialing
options when reviewing a caller ID log entry.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Show the menu.
While in a menu, press to select an item or
save an entry or setting.
Hang up a call.
Return to the previous menu or idle mode
without making changes.
•
•
•
•
The battery icon flashes when the
battery is low and needs charging.
The battery icon animates when the
battery is charging.
The battery icon becomes solid when
the battery is fully charged.
The handset ringer is off.
There are new voicemail received from
your telephone service provider.
The answering system is turned on.
The ECO mode activates automatically
to reduce power consumption when
the handset is within range from the
telephone base.
The entry you are reviewing is new in
the caller ID log.
1/13
The number of current playing
message and the total number of
messages recorded.
The telephone base ringer is off.
There are new voicemail received from
your telephone service provider.
The entry you are reviewing is new in
the caller ID log.
13
The total number of messages
recorded when the telephone base is
not in use.
The number of the playing message.
•
•
Press to enter space during text editing.
Switch to tone dialing temporarily during a call.
Microphone.
While reviewing a caller ID log entry, press
repeatedly to add or remove 1 in front of
the telephone number before dialing or
saving it in the directory.
Press and hold to set or dial your voicemail
number.
•
•
•
•
•
Delete digits while predialing.
Silence the handset ringer temporarily
while the phone is ringing.
Press and hold to erase the missed call
indicator when the phone is not in use.
Press and hold to set and turn on the quiet
mode, or turn it off.
Press repeatedly to display other dialing
options when reviewing a caller ID log entry.
Press to initiate or answer an intercom call,
or to transfer a call.
Mute the microphone during a call.
Silence the handset ringer temporarily while
the phone is ringing.
Delete the displayed entry while reviewing
the directory, caller ID log or redial list.
Delete digits or characters when entering
numbers or names.
Delete the playing message or playing
announcement.
Press to make or answer a call.
During a call, press to switch between the
handset speakerphone and the handset
earpiece.
Press to switch to tone dialing during a call
if you have pulse service.
While reviewing a caller ID log entry, press
repeatedly to add or remove 1 in front of
the telephone number before dialing or
saving it in the directory.
Press and hold to set or dial your voicemail
number.
Press to make or answer a call.
During a call, press to answer an incoming
call when you receive a call waiting alert.
Review the redial list.
Press and hold to insert a dialing pause
while dialing or entering numbers.
On when the handset is charging in the
handset charger.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Install the battery as shown below.
NOTES
Use only supplied battery.
Charge the battery provided with this product
only in accordance with the instructions and
limitations specified in this manual.
If the handset will not be used for a long time,
disconnect and remove the battery to prevent
possible leakage.
•
•
•
Place the handset in the telephone base or
handset charger to charge.
Once you have installed the battery, the handset
LCD display indicates the battery status (see the
table on next page).
NOTES
For best performance, keep the handset in the
telephone base or charger when not in use.
The battery is fully charged after 11 hours of
continuous charging.
If you place the handset in the telephone base or the
charger without plugging in the battery, the screen
displays .
Battery
indicators Battery status Action
The screen
is blank, or
displays
and
flashes.
The battery has
no or very little
charge. The
handset cannot
be used.
Charge without
interruption
(about 30
minutes).
The screen
displays
and flashes.
The battery has
enough charge
to be used for a
short time.
Charge without
interruption
(about 30
minutes).
The screen
displays
.
The battery is
charged.
To keep the
battery charged,
place it in the
handset charger
when not in use.
•
•
•
After you install your telephone or power returns
following a power outage, the handset will prompt
you to set the date and time.
NOTE
Make sure you set the date and time including the year
correctly; otherwise the answering system does not
announce the correct day of the week for your recorded
messages time stamp.
Use the dialing keys ( ) to enter the month
( ), date ( ) and year ( ). Then press
.
Use the dialing keys ( ) to enter the hour
( ) and minute ( ). Then press or to
choose or .
Press to save.
Press . If you hear a dial tone, the installation
is successful.
Make sure the installation procedures
described above are properly done.
It may be a wiring problem. If you have
changed your telephone service to digital
service from a cable company or a VoIP service
provider, the telephone line may need to be
rewired to allow all existing telephone jacks to
work. Contact your cable/VoIP service provider
for more information.
This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance - which
can vary with the locations of the telephone base
and handset, the weather, and the layout of your
home or office.
When the handset is out of range, the handset
displays .
If there is a call while the handset is out of range,
it may not ring, or if it does ring, the call may not
connect well when you press . Move closer to
the telephone base, then press to answer the
call.
If the handset moves out of range during
a telephone conversation, there may be
interference. To improve reception, move closer to
the telephone base.
1.
2.
3.
•
•
You can use the telephone base or a cordless
handset to change your telephone settings.
Press when the phone is not in use.
Press or until the screen displays the
desired feature menu.
Press to enter that menu.
To return to the previous menu, press
.
To return to idle mode, press and hold
.
1.
2.
3.
•
•
The LCD language is preset to English. You can
select English, French or Spanish to be used in all
screen displays.
Press when the handset/telephone base
is not in use.
Press or to scroll to , then press
.
Press to select .
Press or to select , or
, then press .
NOTE
Make sure you set the date and time including the year
correctly; otherwise the answering system does not
announce the correct day of the week for your recorded
messages time stamp.
Press when the handset/telephone base
is not in use.
Press or to scroll to , then
press .
Use the dialing keys ( ) to enter the month
( ), date ( ) and year ( ). Then press
.
Use the dialing keys ( ) to enter the hour
( ) and minute ( ). Then press or to
choose or .
Press .
If you have pulse (rotary) service only, you can
switch from pulse to touch-tone dialing temporarily
during a call.
During a call, press .
Use the dialing keys to enter the number you
wish to dial. The telephone sends touch-tone
signals. It automatically returns to pulse dialing
mode after you end the call.
1.
2.
3.
4.
1.
2.
3.
4.
5.
1.
2.
Press or on the handset and then dial the
number.
Lift the corded handset, or press
on the telehpone base, then dial the number.
Press , or any of the dialing keys on the
handset.
Lift the corded handset, or press
or any of the dialing keys on the telephone base.
Press on the handset or place the handset
in the handset charger.
When you are using the corded handset, place
it on the telephone base.
When you are using the base speakerphone,
press .
When the cordless handset is on a call,
press to switch between the handset
speakerphone and the handset earpiece.
When the corded handset is on a call, press
on the telephone base to switch
between the telephone base speakerphone
and the corded handset.
During a call, press or
on the handset, or press or on
the telephone base to adjust the listening
volume.
The mute function allows you to hear the other
party but the other party cannot hear you.
During a call, press on the handset. The
handset displays until the mute function
is turned off.
Press on the handset again to resume
the conversation. The handset displays
on briefly.
During a call, press on the telephone
base. The telephone base displays and
the light turns on until the mute function
is turned off.
Press on the telephone base again to
resume the conversation. The telephone base
displays on briefly.
•
•
•
•
•
1.
2.
•
•
•
1.
2.
1.
2.
a
b
c
d
e
fgh
i
j
k
l
THIS SIDE UP
While on an outside call, you can transfer the call
from a cordless handset to another handset or the
telephone base.
During a call, press .
Press or to scroll to , then press
.
Your handset shows Press for
the telephone base or - for to
.
To answer the call on the destination handset,
press , or any dialing key on the handset,
or lift the corded handset, or press
or any dialing key on the telephone base.
You can use the telephone base and a cordless
handset, or two cordless handsets at a time on an
outside call.
When a handset or the telephone base is
already on a call, press or on another
handset to join the call.
Press or place the handset in the handset
charger to exit the call. The call continues until
both devices hang up.
Lift the corded handset or press
on the telephone base.
Place the corded handset back to the
telephone base or press on
the telephone base to exit the call. The call
continues until both devices hang up.
If you subscribe to call waiting service from your
telephone service provider, you hear an alert
tone when there is an incoming call while you are
already on a call.
Press to put your current call on hold
and take the new call.
Press to switch back and forth between
calls.
Use this feature helps you find misplaced
handsets.
Press on the telephone base
and its screen displays . All idle
handsets ring and display .
Press , , or any of the dialing keys
on the cordless handset.
Place the cordless handset to the handset
charger.
1.
2.
3.
4.
•
•
•
•
•
•
•
•
•
Press on the telephone base.
NOTE
Do not press and hold for more than
four seconds. It may lead to handset deregistration.
•
Use the intercom feature for conversations
between the telephone base and a cordless
handset, or two cordless handsets.
Press for the telephone base or - for
to .
Press on the cordless handset when the
phone is not in use.
To answer the intercom call on the destination
handset, press , , or any dialing key.
To answer the intercom call at the telephone
base, press , , any dialing
key, or lift the corded handset.
3. To end the intercom call on either handset, one
party presses , or places the handset back
in the handset charger.
To end the intercom call at the telephone
base, press or when using
the base speakerphone, or place the corded
handset back to the telephone base.
Press on the telephone base when the
phone is not in use.
To answer the intercom call on the destination
handset, press , , or any dialing key.
To end the intercom call at the telephone
base, press , or when using
the base speakerphone, or place the corded
handset back to the telephone base.
To end the intercom call on the destination
handset, press , or place the handset back
in the handset charger.
•
1.
2.
1.
2.
3.
If you receive an incoming outside call during an
intercom call, you will hear an alert tone.
To answer the call, press . The intercom call
ends automatically.
To end the intercom call without answering or
canceling the incoming call, press . The
telephone continues to ring.
Press , or place the corded
handset back to the base. The intercom call
ends automatically. Then press ,
or lift up the corded handset to answer the call.
To end the intercom call without answering or
canceling the incoming call, press
, or place the corded handset
back to the base. The telephone continues to
ring.
Use the intercom feature to transfer an outside
call to another cordless handset or the telephone
base.
During a call, press .
To answer the call on the destination handset,
press , , , or any dialing key. The
outside call is still on hold. You can now have a
private intercom conversation.
To answer the call at the telephone base,
press , , any dialing key or
lift the corded handset. The outside call is still
on hold. You can now have a private intercom
conversation.
During a call, press .
To answer the call on the destination handset,
press , , , or any dialing key. The
outside call is still on hold. You can now have a
private intercom conversation.
•
•
•
•
1.
2.
1.
2.
The directory can store up to 50 entries, which are
shared by all handsets and the telephone base.
Each entry may consist of a telephone number
with up to 30 digits and a name with up to 15
characters.
Enter the number when the phone is not in use.
Press , then go to Step 3.
Press on the handset or on the
telephone base when the phone is not in
use, then press or to scroll to
, then press .
Press or to scroll to , then
press .
2. Use the dialing keys to enter the number.
Copy a number from the redial list by pressing
and then press , or
repeatedly to find the desired number. Press
to copy the number.
3. Press to move on to enter the name.
4. Use the dialing keys to enter the name.
Additional key presses show other characters
of that particular key.
5. Press to save.
Press to backspace and erase a digit
or character.
Press and hold to erase the entire entry.
1.
•
•
•
•
Press or to move the cursor to the left or
right.
Press and hold to insert a dialing
pause (for entering numbers only).
Press to add a space (for entering names
only).
Entries are sorted alphabetically.
Press on the cordless handset when the
phone is not in use, or on the telephone
base when the telephone base is not in use.
Press or to browse through the directory,
or use the dialing keys to start a name search.
When the desired entry appears:
Press or on the handset.
Lift the corded handset or press
on the telephone base.
When the desired entry displays, press
.
Use the dialing keys to edit the number, then
press .
Use the dialing keys to edit the name, then
press .
When the desired entry appears, press
. When the screen displays
, press .
You can copy up to nine directory entries into the
speed dial locations ( and - ) so that you can
dial these numbers more quickly.
Press when the phone is not in use.
Press or to scroll to , then press
.
Press or to scroll to , then
press .
Press , or a dialing key ( or - ) to choose
the desired speed dial location.
Press . The screen displays
Press or to scroll to desired entry, then
press .
When the phone is not in use, press and hold a
dialing key ( or - ) to dial the number stored
in the corresponding speed dial location.
•
•
•
1.
2.
•
1.
2.
3.
1.
1.
2.
3.
4.
5.
6.
•
Each handset and the telephone base store the
last 10 telephone numbers dialed. When there are
already 10 entries, the oldest entry is deleted to
make room for the new entry.
Press on the handset or the telephone
base when the phone is not in use.
Press , or repeatedly until the
desired entry displays.
When the desired entry displays, press or
on the handset to dial.
Lift the corded handset or press
on the telephone base to dial.
While the screen displays the desired number,
press on the handset or press
on the telephone base.
1.
2.
3.
•
a
b
c
d
e
f
g
h
i
j
k
l
m
n
The manufacturer of this VTech Product warrants
to the holder of a valid proof of purchase
(“Consumer” or “you”) that the Product and
all accessories provided in the sales package
(“Product”) are free from defects in material and
workmanship, pursuant to the following terms
and conditions, when installed and used normally
and in accordance with the Product operating
instructions. This limited warranty extends only to
the Consumer for Products purchased and used in
the United States of America and Canada.
During the limited warranty period, VTech’s
authorized service representative will repair
or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair
the Product, we may use new or refurbished
replacement parts. If we choose to replace
the Product, we may replace it with a new or
refurbished Product of the same or similar
design. We will retain defective parts, modules, or
equipment. Repair or replacement of the Product,
at VTech’s option, is your exclusive remedy.
VTech will return the repaired or replacement
Products to you in working condition. You
should expect the repair or replacement to take
approximately 30 days.
The limited warranty period for the Product
extends for ONE (1) YEAR from the date of
purchase. If VTech repairs or replaces a Materially
Defective Product under the terms of this limited
warranty, this limited warranty also applies to the
repaired or replacement Product for a period of
either (a) 90 days from the date the repaired or
replacement Product is shipped to you or (b) the
time remaining on the original one-year warranty;
whichever is longer.
This limited warranty does not cover:
Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or
other liquid intrusion; or
Product that has been damaged due to repair,
alteration or modification by anyone other than
an authorized service representative of VTech;
Product to the extent that the problem
experienced is caused by signal conditions,
network reliability, or cable or antenna systems;
Product to the extent that the problem is
caused by use with non-VTech accessories;
1.
2.
3.
4.
Below are the questions most frequently asked
about the cordless telephone. If you cannot find
the answer to your question, visit our website at
or call
for customer service.
My telephone
does not work
at all.
Make sure the telephone
base is installed properly,
and battery is installed
and charged correctly. For
optimum daily performance,
return the handset to the
telephone base after use.
The display
shows . I
cannot hear the
dial tone.
Disconnect the telephone
line cord from your
telephone and connect it to
another telephone. If there
is no dial tone on that other
telephone either, then the
telephone line cord may be
defective. Try installing a
new telephone line cord.
If changing the telephone
line cord does not help,
the wall jack (or the wiring
to this wall jack) may be
defective. Contact your
telephone service provider.
You may be using a new
cable or VoIP service, the
existing telephone jacks in
your home may no longer
work. Contact your service
provider for solutions.
The display
shows
and
alternately. The
handset does not
work at all.
The handset is deregistered
from the telephone base. To
register it back:
Press and hold
on the
telephone base for about
four seconds until the
light turns on and
it shows
Press on the
handset. The handset
shows
Both the telephone base
and cordless handset
show , and
you hear a beep when
the registration process
completes. This process
takes about 60 seconds.
If registration fails, the
handset displays .
Repeat steps 1 to 2 again.
1.
2.
The answering
system does
not record
messages.
Make sure the answering
system is on. When the
answering system is on,
should display
on the handset and the
telephone base.
When the answering
machine memory is full,
it does not record new
messages until some old
messages are deleted.
If you subscribe to
voicemail service, change
the number of rings so that
your answering system
answers before your
voicemail service answers.
To determine how many
rings activate your voicemail
service, contact your
telephone service provider.
The answering
system does
not announce
the correct day
of the week
for recorded
messages time
stamp.
Make sure you have set
the date and time. See
section.
The messages
on the answering
system are
incomplete.
If a caller leaves a very long
message, part of it may be
lost when the answering
system disconnects the call
after the preset recording
time.
If the memory on the
answering system becomes
full during a message, the
answering system stops
recording and disconnects
the call.
I accidentally
set my LCD
language to
Spanish or
French, and I
don’t know how
to change it back
to English.
While the handset is not in
use, press and then
enter to change the
handset LCD language
back to English.
Product whose warranty/quality stickers,
product serial number plates or electronic
serial numbers have been removed, altered or
rendered illegible;
Product purchased, used, serviced, or shipped
for repair from outside the United States of
America or Canada, or used for commercial or
institutional purposes (including but not limited
to Products used for rental purposes);
Product returned without a valid proof of
purchase (see item 2 below); or
Charges for installation or set up, adjustment of
customer controls, and installation or repair of
systems outside the unit.
To obtain warranty service in the USA, please visit
our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
Before calling for service, please review
the user’s manual - a check of the Product’s
controls and features may save you a service call.
Except as provided by applicable law, you assume
the risk of loss or damage during transit and
transportation and are responsible for delivery or
handling charges incurred in the transport of the
Product(s) to the service location. VTech will return
repaired or replaced Product under this limited
warranty. Transportation, delivery or handling
charges are prepaid. VTech assumes no risk for
damage or loss of the Product in transit.
If the Product failure is not covered by this limited
warranty, or proof of purchase does not meet the
terms of this limited warranty, VTech will notify
you and will request that you authorize the cost of
repair prior to any further repair activity. You must
pay for the cost of repair and return shipping costs
for the repair of Products that are not covered by
this limited warranty.
Return the entire original package and
contents including the Product to the VTech
service location along with a description of the
malfunction or difficulty; and
Include a “valid proof of purchase” (sales receipt)
identifying the Product purchased (Product
model) and the date of purchase or receipt; and
Provide your name, complete and correct
mailing address, and telephone number.
This warranty is the complete and exclusive
agreement between you and VTech. It supersedes
all other written or oral communications related to
this Product. VTech provides no other warranties
for this Product. The warranty exclusively
describes all of VTech’s responsibilities regarding
the Product. There are no other express
warranties. No one is authorized to make
5.
6.
7.
8.
1.
2.
3.
Frequency
control
Crystal controlled PLL synthesizer
Transmit
frequency
Handset:
1921.536-1928.448 MHz
Telephone base:
1921.536-1928.448 MHz
Channels 5
Nominal
effective
range
Maximum power allowed by FCC and
IC. Actual operating range may vary
according to environmental conditions at
the time of use.
Power
requirement
Handset:
2.4V Ni-MH battery
Telephone base:
6V DC @ 400mA
Charger:
6V AC @ 300mA
Memory Directory:
50 memory locations;
up to 30 digits and 15 characters
Caller ID log:
50 memory locations;
up to 24 digits and 15 characters
modifications to this limited warranty and you
should not rely on any such modification.
State/Provincial Law Rights: This warranty gives
you specific legal rights, and you may also have
other rights, which vary from state to state or
province to province.
Limitations: Implied warranties, including those of
fitness for a particular purpose and merchantability
(an unwritten warranty that the Product is fit for
ordinary use) are limited to one year from the
date of purchase. Some states/provinces do not
allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to
you. In no event shall VTech be liable for any
indirect, special, incidental, consequential, or
similar damages (including, but not limited to lost
profits or revenue, inability to use the Product or
other associated equipment, the cost of substitute
equipment, and claims by third parties) resulting
from the use of this Product. Some states/
provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Your cordless telephone contains sophisticated
electronic parts, so it must be treated with care.
Place the handset down gently. Save the original
packing materials to protect your telephone if you
ever need to ship it.
Your telephone can be damaged if it gets wet. Do
not use the handset outdoors in the rain, or handle
it with wet hands. Do not install the telephone
base near a sink, bathtub or shower.
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Your telephone has a durable plastic casing that
should retain its luster for many years. Clean it
only with a dry non-abrasive cloth. Do not use
dampened cloth or cleaning solvents of any kind.
If you subscribe to caller ID service, information
about each caller will appear after the first or
second ring. If you answer a call before the caller’s
information appear on the screen, it will not be
saved in the caller ID log.
The caller ID log stores up to 50 entries. Each
entry has up to 24 digits for the phone number and
15 characters for the name.
If the phone number has more than 15 digits, only
the last 15 digits appear. If the name has more
than 15 characters, only the first 15 characters are
shown and saved in the caller ID log.
Press on the cordless handset or the
telephone base when the phone is not in use.
Press or to browse through the caller ID
log.
When there are calls that have not been reviewed
in the caller ID log, the screens display
.
Each time you review a caller ID log entry marked
on the handset or on the telephone
base, the number of missed calls decreases by one.
When you have reviewed all the missed calls, the
missed call indicator no longer displays.
If you do not want to review the missed calls one
by one, press and hold when not in use
to clear the missed call indicator. All the entries
are then considered old.
When the desired entry displays, press or
on the handset to dial.
When the desired entry displays, press
or lift the corded handset to dial.
1.
2.
When the desired caller ID log entry displays,
press .
Use the dialing keys to modify the number, if
necessary. Then press .
Use the dialing keys to modify the name, if
necessary. Then press .
When the desired caller ID log entry displays,
press .
Press on the handset or on the
telephone base when the phone is not in use.
Scroll to and then press
.
Scroll to then press
twice.
1.
2.
3.
•
1.
2.
3.
You can turn the key tone on or off for each
handset and the telephone base.
Press when the handset/telephone base
is not in use.
Scroll to and then press .
Scroll to choose , then press
.
Press or to choose or
, then press to save.
You can choose from different ringer tones for
each handset and the telephone base.
Press when the handset/telephone base
is not in use.
Scroll to and then press .
Scroll to choose , then press
.
Press or to sample each ringer tone, then
press to save.
NOTE
If you turn off the ringer volume on a cordless handset,
you will not hear ringer tone samples.
Press or on the telephone base to
adjust the ringer volume when the telephone base
is not in use.
When you set the ringer volume to zero, the base
ringer is off. The telephone base announces,
“ ,” and displays and
.
1.
2.
3.
4.
1.
2.
3.
4.
You can adjust the handset ringer volume level, or
turn the ringer off.
Press when the handset/telephone base
is not in use.
Scroll to and then press
twice.
Press or to sample each volume level,
then press to save.
NOTE
When the ringer volume is set to off, the handset still
rings when you press at the telephone
base.
When the telephone is ringing, you can temporarily
silence the ringer without disconnecting the call.
The next call rings normally at the preset volume.
Press or on the handset and it
displays and .
Press or on the telephone
base and it displays .
You can turn on quiet mode for a period of time
(1-12 hours). During this period, all tones (except
paging tone) and call screening are muted.
Press and hold when the handset/
telephone base is not in use.
Use the dialing keys to enter the desired
duration (1-12), then press .
While the quiet mode is on, press and hold
.
1.
2.
3.
•
•
1.
2.
•
For message recording, your telephone has a
built-in answering system, and it also supports
voicemail service offered by your telephone
service provider (subscription is required, and fee
may apply).
The main differences between them are:
Storage Messages are
stored in the
telephone base.
Messages are
stored in a server
or system provided
by your telephone
service provider.
You messages
will not be deleted
automatically. You
have to delete your
message manually.
Your messages
may be
automatically
deleted after a
period of time.
Contact your
telephone service
provider for more
details.
Method
to retrieve
messages
When you
received new
messages, the
handset and the
telephone base
both display
,
and the
light
on the telephone
base flashes.
When you receive
new messages,
the handset and
the telephone base
display and
.
To retrieve
messages, usually
there are two
ways:
Press
on
the telephone
base; or
Access
remotely with
an access
code.
•
•
To retrieve
messages, you
need an access
number and/or a
password provided
by your telephone
service provider.
The answering system can record and store
up to 99 messages. Each message can be up
to three minutes in length. The total storage
capacity for the announcement, messages and
memos is approximately 14 minutes. The actual
recording time depends on individual message
characteristics.
Your answering system allows you to set your
announcement, to save and delete messages,
activate call screening, to set number of rings
before pick up, to access remotely, and to control
the recording time.
The answering system must be turned on to
answer and record messages.
Press to turn the built-in
answering system on or off.
Press when the handset/telephone base
is not in use.
Press or to scroll to , then
press .
Press or to scroll to , then
press .
Press or to scroll to or
, then press .
The telephone is preset with a greeting that
answers calls with, “
” You can use this preset
announcement, or replace it with your own.
The announcement can be up to 90 seconds in
length.
Press when the phone is not in use.
Press or to scroll to , then
press twice.
The system announces, “
” Press to record.
The system announces, “
” After the tone,
speak towards the microphone.
Press when done.
Press when the phone is not in use.
Press or to scroll to , then
press twice.
The system announces, “
” Press to play the current
announcement.
•
1.
2.
3.
4.
1.
2.
3.
4.
5.
1.
2.
3.
Options during playback:
Press or on the
cordless handset, or or on the
telephone base to adjust the listening volume.
Press to stop playback.
Press when the phone is not in use.
Press or to scroll to , then
press twice.
The system announces, “
” Press or to delete
your recorded announcement.
NOTE
When your announcement is deleted, calls are answered
with the default announcement.
You can set the answering system to answer
an incoming call after two, three, four, five or six
rings; or toll saver. If you choose toll saver, the
answering system answers a call after two rings
if you have new messages, or after four rings
when there are no new messages. This enables
you to check for new messages and avoid paying
unnecessary long distance charges when you are
calling from outside your local area.
Press when the phone is not in use.
Press or to scroll to , then
press .
Press or to scroll to , then
press .
Scroll to , then press .
Press or to select , , , , or
, and then press .
You can set the recording time allowed for each
incoming message.
Press when the phone is not in use.
Press or to scroll to , then
press .
Press or to scroll to , then
press .
Scroll to , then press
.
Press or to select ,
or , and then press .
When there are new answering system messages,
the handset and the telephone base display
, and the light on
the telephone base flashes.
•
•
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
If the message alert tone is turned on, the
telephone base beeps every 10 seconds when
there are messages that have not been reviewed.
Press when the phone is not in use.
Press when the phone is not in use.
Press to select .
Options during playback:
Press or to adjust the message
playback volume.
Press to skip to the next message.
Press to repeat the message.
Press twice to hear the previous
message.
Press to delete the playing
message. The system advances to the next
message.
Press or to stop the playback.
Press when the phone is not in use.
Press to select .
Options during playback:
Press or to adjust the
message playback volume.
Press to skip to the next message.
Press to repeat the message. Press twice
to hear the previous message.
Press or to delete the playing
message. The system advances to the next
message.
Press to stop the playback.
You can only delete old (reviewed) messages.
You cannot delete new messages until you review
them. You cannot retrieve deleted messages.
Press twice when the phone is not
in use.
Press when the phone is not in use.
Press or to scroll to , then
press .
Press or to scroll to , and
then press twice.
•
1.
2.
•
•
•
•
•
1.
2.
•
•
•
•
•
1.
1.
2.
3.
You can use your answering system and voicemail
service together by setting your answering system
to answer before voicemail service answers as
described below. To learn how to program your
voicemail settings, contact your telephone service
provider.
If you are on a call, or if the answering system
is busy recording a message and you receive
another call, the second caller can leave a
voicemail message.
Set your answering system to answer calls at
least two rings earlier than your voicemail is set to
answer. For example, if your voicemail answers
after six rings, set your answering system to
answer after four rings. Some voicemail providers
may program the delay before answering calls
in seconds instead of rings. In this case, allow
six seconds per ring when determining the
appropriate setting.
You can add new handsets ( , purchased
separately) to your telephone system. Your
telephone base supports a maximum of five
handsets.
For more details, refer to the user’s manual that
comes with your new handset.
Press when the phone is not in use.
Press or to scroll to , then press
.
Press or to scroll to , then
press .
Press , or a dialing key ( or - ) to choose
the desired speed dial location, then press
to show the speed dial entry.
Press again. Then press or to
scroll to and then press .
The screen shows
Press . The screen shows
6. Press to confirm.
1.
2.
3.
4.
5.
Voicemail is a feature available from most
telephone service providers. It may be included
with your telephone service, or may be optional.
Fees may apply.
When you received a voicemail, the handset
and the telephone base display and
. To retrieve, you typically dial an access
number provided by your telephone service
provider, and then enter a security code. Contact
your telephone service provider for instructions on
how to configure the voicemail settings and listen
to messages.
NOTE
After you have listened to all new voicemail
messages, the indicators on the handset and the
telephone base turn off automatically.
If you have retrieved your voicemail while away
from home, and the telephone still displays the
new voicemail indicators, use this feature to turn
off the indicators.
NOTE
This feature turns off the indicators only, it does
not delete your voicemail messages.
Press when the handset/telephone base
is not in use.
Scroll to , then press .
Scroll to , then press .
Press again to confirm.
1.
2.
3.
4.
Designed to fit your home.
And your life.
VTech Communications, Inc.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
© 2015 VTech Communications, Inc.
All rights reserved. 01/15. CS6649-X_ACIB_V11.0
Document order number: 91-007067-040-100
A two-digit security code is required to access the
answering system remotely from any touch-tone
telephone. The preset code is . You can use this
preset code, or set your own.
Dial your telephone number from any touch-
tone telephone.
When the system plays your announcement,
enter the two-digit security code.
Enter one of the following remote commands.
Play all messages.
Play only new messages.
Delete the current message (during
playback).
Delete all old messages.
Repeat the current message
(during playback).
Stop.
Hear a list of remote commands.
Skip to the next message
(during playback).
Record a new announcement.
End the call.
Turn the answering system on or off.
4. Hang up or press to end the call.
1.
2.
3.
Product specificaties
| Merk: | VTech |
| Categorie: | Telefoon |
| Model: | CS6649-2 |
Heb je hulp nodig?
Als je hulp nodig hebt met VTech CS6649-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Telefoon VTech
27 Februari 2024
27 Februari 2024
25 Juli 2023
17 Juni 2023
15 Juni 2023
2 Juni 2023
9 Mei 2023
8 Mei 2023
2 Mei 2023
30 April 2023
Handleiding Telefoon
- Telefoon Philips
- Telefoon Sony
- Telefoon Samsung
- Telefoon Xiaomi
- Telefoon Panasonic
- Telefoon LG
- Telefoon Huawei
- Telefoon Asus
- Telefoon AEG
- Telefoon Fysic
- Telefoon Grundig
- Telefoon Gigaset
- Telefoon JBL
- Telefoon Motorola
- Telefoon Medion
- Telefoon Nokia
- Telefoon Pioneer
- Telefoon Siemens
- Telefoon Topcom
- Telefoon Toshiba
- Telefoon Wiko
- Telefoon Yamaha
- Telefoon Yealink
- Telefoon Aastra
- Telefoon Acer
- Telefoon AGFEO
- Telefoon Airis
- Telefoon Airlive
- Telefoon Alcatel
- Telefoon Alcatel-Lucent
- Telefoon Allview
- Telefoon Amplicom
- Telefoon Amplicomms
- Telefoon Anker
- Telefoon Apple
- Telefoon Archos
- Telefoon Ascom
- Telefoon Audio-Technica
- Telefoon Audioline
- Telefoon Auerswald
- Telefoon Avaya
- Telefoon AVM
- Telefoon Belgacom
- Telefoon Binatone
- Telefoon Blackberry
- Telefoon Blaupunkt
- Telefoon BT
- Telefoon D-Link
- Telefoon Davolink
- Telefoon Denver
- Telefoon Doro
- Telefoon Draytek
- Telefoon Emporia
- Telefoon Engenius
- Telefoon Envivo
- Telefoon Fenton
- Telefoon Flex
- Telefoon GE
- Telefoon Geemarc
- Telefoon Gigaset Pro
- Telefoon GPO
- Telefoon Grandstream
- Telefoon Hagenuk
- Telefoon Hama
- Telefoon Hitachi
- Telefoon Honor
- Telefoon HTC
- Telefoon HUMANTECHNIK
- Telefoon Innovaphone
- Telefoon KONFTEL
- Telefoon KPN
- Telefoon Kyocera
- Telefoon Lenovo
- Telefoon LevelOne
- Telefoon Lexibook
- Telefoon Linksys
- Telefoon Loewe
- Telefoon Logicom
- Telefoon Logik
- Telefoon Logitech
- Telefoon Mackie
- Telefoon Marmitek
- Telefoon Marquant
- Telefoon Marshall
- Telefoon Maxcom
- Telefoon Microsoft
- Telefoon Mikrotik
- Telefoon Mitel
- Telefoon MT Logic
- Telefoon Nec
- Telefoon Netgear
- Telefoon Nordmende
- Telefoon Parrot
- Telefoon Patton
- Telefoon Peaq
- Telefoon Pixel
- Telefoon Plantronics
- Telefoon Polycom
- Telefoon Premier
- Telefoon Prestigio
- Telefoon Profoon
- Telefoon Proximus
- Telefoon Pyle
- Telefoon Ranex
- Telefoon RCA
- Telefoon Realme
- Telefoon Renkforce
- Telefoon Roland
- Telefoon RugGear
- Telefoon Sagem
- Telefoon Sagemcom
- Telefoon Sencor
- Telefoon Sennheiser
- Telefoon Silvercrest
- Telefoon SMC
- Telefoon Snom
- Telefoon Spectralink
- Telefoon Sunstech
- Telefoon Sweex
- Telefoon Swissvoice
- Telefoon Switel
- Telefoon Sylvania
- Telefoon TCL
- Telefoon Tecdesk
- Telefoon Telefunken
- Telefoon Telstra
- Telefoon Thomson
- Telefoon Tiptel
- Telefoon Trendnet
- Telefoon Tristar
- Telefoon Trust
- Telefoon Uniden
- Telefoon Unify
- Telefoon Viking
- Telefoon Zebra
- Telefoon ZTE
- Telefoon ZyXEL
- Telefoon Jabra
- Telefoon Jacob Jensen
- Telefoon Olympia
- Telefoon OnePlus
- Telefoon Oppo
- Telefoon Oregon Scientific
- Telefoon Overmax
- Telefoon Essentiel B
- Telefoon Bang And Olufsen
- Telefoon BeeWi
- Telefoon CSL
- Telefoon Krüger And Matz
- Telefoon Steren
- Telefoon Ubiquiti Networks
- Telefoon Crosley
- Telefoon Infiniton
- Telefoon MXL
- Telefoon Hamlet
- Telefoon Edenwood
- Telefoon Trevi
- Telefoon Scosche
- Telefoon Oricom
- Telefoon AT&T
- Telefoon AudioCodes
- Telefoon ClearOne
- Telefoon Chacon
- Telefoon Valcom
- Telefoon SPC
- Telefoon Canyon
- Telefoon Cisco
- Telefoon Teledex
- Telefoon EVOLVEO
- Telefoon CAT
- Telefoon Oukitel
- Telefoon 3Com
- Telefoon Planet
- Telefoon Cubot
- Telefoon Clarity
- Telefoon Xblitz
- Telefoon VXi
- Telefoon Lindy
- Telefoon AVerMedia
- Telefoon Fortinet
- Telefoon Bogen
- Telefoon ArtDio
- Telefoon XD Enjoy
- Telefoon CTA Digital
- Telefoon MyPhone
- Telefoon Fanvil
- Telefoon Crestron
- Telefoon Yeastar
- Telefoon JPL
- Telefoon OpenVox
- Telefoon Gamdias
- Telefoon Primare
- Telefoon Syco
- Telefoon Edge-Core
- Telefoon Vimar
- Telefoon Akuvox
- Telefoon Legrand
- Telefoon Digium
- Telefoon Clear Sounds
- Telefoon Mitsai
- Telefoon ALLO
- Telefoon On-Q
- Telefoon Lewitt
- Telefoon Tecno
- Telefoon Vogtec
- Telefoon Olitech
- Telefoon Dopod
- Telefoon Sedna
- Telefoon British Telecom
- Telefoon CyberData Systems
- Telefoon Cortelco
- Telefoon Bintec-elmeg
- Telefoon EMeet
- Telefoon Wantec
- Telefoon Neat
- Telefoon Algo
- Telefoon Future Call
- Telefoon 4family
- Telefoon Tador
- Telefoon Dnake
- Telefoon Liam&Daan
- Telefoon FlyingVoice
Nieuwste handleidingen voor Telefoon
10 December 2024
6 December 2024
6 December 2024
6 December 2024
30 November 2024
30 November 2024
24 November 2024
23 November 2024
23 November 2024
23 November 2024