Vox 43DSW550B Handleiding
Lees hieronder de π handleiding in het Nederlandse voor Vox 43DSW550B (35 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/35
ELECTRONICS
OPERATING INSTRUCTIONS FOR TV
LED 43DSW550B
ξξξξξξξξξξξξξξξξ
ξξξξξξξ
ξ
Hξ
ξl'"
English - 1 -
Connectivity Troubleshooting ................................ 29
Using Audio Video Sharing Network Service 29 .........
Apps 30 ......................................................................
Internet Browser 30 ....................................................
HBBTV System...................................................... 31
Smart Center 31 .........................................................
DVB functionality information 33 ................................
Contents
Safety Information 2 ...................................................
Markings on the Product.......................................... 2
Environmental Information....................................... 3
Features 3 ..................................................................
Accessories Included............................................... 4
Standby Notifications 4 ...............................................
TV Control Button & Operation 4 ................................
Using Main TV Menu 5 ...............................................
Inserting the Batteries into the Remote 6 ...................
Power Connection 6 ...................................................
Antenna Connection 6 ................................................
License Notification 7 .................................................
Disposal Information 7 ................................................
Specification 8 ............................................................
Remote Control 9 .......................................................
Connections........................................................... 10
Switching On/Off .................................................... 11
First Time Installation............................................. 11
Media Playback via USB Input 12 ..............................
USB Recording 12 ......................................................
Media Browser....................................................... 14
FollowMe TV .......................................................... 14
CEC 14 .......................................................................
E-Manual 15 ...............................................................
Settings Menu Content 16 ..........................................
General TV Operation ........................................... 22
Using the Channel List 22 ..........................................
Configuring Parental Settings 22 ................................
Electronic Programme Guide 22 ................................
Teletext Services 23 ...................................................
Software Upgrade.................................................. 23
Troubleshooting & Tips .......................................... 23
PC Input Typical Display Modes 24 ............................
AV and HDMI Signal Compatibility 24 ........................
Supported File Formats for USB Mode 25 .................
Video File Formats 25 ................................................
Picture File Formats 25 ..............................................
Audio File Formats 25 ................................................
Subtitle File Formats.............................................. 26
Supported DVI Resolutions 26 ...................................
Connectivity 27 ...........................................................
Wired Connectivity................................................. 27
Wireless Connectivity 27 ............................................
Networked Standby Mode 28 .....................................
Wireless Display 29 ....................................................
English - 2 -
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Note: Follow the on screen instructions for operating the related
features.
In extreme weather (storms, lightning) and long inactivity
periods (going on holiday) disconnect the TV set from the
mains.
The mains plug is used to disconnect TV set from the mains
and therefore it must remain readily operable. If the TV set is
not disconnected electrically from the mains, the device will
still draw power for all situations even if the TV is in standby
mode or switched off.
IMPORTANT - Please read these instructions
fully before installing or operating
WARNING: This device is intended to be used
by persons (including children) who are
capable / experienced of operating such a device
unsupervised, unless they have been given
supervision or instruction concerning the use of
the device by a person responsible for their safety.
β’ξ Use this TV set at an altitude of less than 5000 meters
above the sea level, in dry locations and in regions
with moderate or tropical climates.
β’ξ The TV set is intended for household and similar
indoor use but may also be used in public places..
β’ξ For ventilation purposes, leave at least 5cm of free
space around the TV.
β’ξ The ventilation should not be impeded by covering
or blocking the ventilation openings with items, such
as newspapers, table-cloths, curtains, etc.
β’ξ The power cord plug should be easily accessible. Do
not place the TV, furniture, etc. on the power cord.
A damaged power cord/plug can cause fire or give
you an electric shock. Handle the power cord by the
plug, do not unplug the TV by pulling the power cord.
Never touch the power cord/plug with wet hands as
this could cause a short circuit or electric shock.
Never make a knot in the power cord or tie it with
other cords. When damaged it must be replaced, this
should only be done by qualified personnel.
β’ξ Do not expose the TV to dripping or splashing of
liquids and do not place objects filled with liquids,
such as vases, cups, etc. on or over the TV (e.g.,
on shelves above the unit).
β’ξ Do not expose the TV to direct sunlight or do not
place open flames such as lit candles on the top of
or near the TV.
β’ξ Do not place any heat sources such as electric
heaters, radiators, etc. near the TV set.
β’ξ Do not place the TV on the floor and inclined
surfaces.
β’ξ To avoid danger of suffocation, keep plastic bags
out of the reach of the babies, children and domestic
animals.
β’ξ Carefully attach the stand to the TV. If the stand is
provided with screws, tighten the screws firmly to
prevent the TV from tilting. Do not over-tighten the
screws and mount the stand rubbers properly.
β’ξ Do not dispose of the batteries in fire or with
hazardous or flammable materials.
WARNING
β’ξ Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
β’ξ Excessive sound pressure from earphones or
headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen, push anything
into holes, slots or any other openings in the case.
Caution Serious injury or death risk
Risk of electric shock Dangerous voltage risk
Maintenance
Important maintenance
component
Markings on the Product
The following symbols are used on the product as
a marker for restrictions and precautions and safety
instructions. Each explanation shall be considered
where the product bears related marking only. Note
such information for security reasons.
Class II Equipment: This appliance is
designed in such a way that it does not require
a safety connection to electrical earth.
Hazardous Live Terminal: The marked
terminal(s) is/are hazardous live under normal
operating conditions.
iCaution, See Operating Instructions: The
marked area(s) contain(s) user replaceable
coin or button cell batteries.
CLASS 1
LASER PRODUCT
Class 1 Laser Product: This
product contains Class 1
laser source that is safe under
reasonably foreseeable
conditions of operation.
English - 3 -
WARNING
Do not ingest the battery, Chemical Burn Hazard
This product or the accessories supplied with the pro -
duct may contain a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close secu -
rely, stop using the product and keep it away from
children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
β β β β β β β β β β β β
A television may fall, causing serious personal injury
or death. Many injuries, particularly to children, can
be avoided by taking simple precautions such as:
ξξ ALWAYS use cabinets or stands or mounting
methods recommended by the manufacturer of
the television set.
ξξ ALWAYS use furniture that can safely support the
television set.
ξξ ALWAYS ensure the television set is not overhan -
ging the edge of the supporting furniture.
ξξ ALWAYS educate children about the dangers of
climbing on furniture to reach the television set
or its controls.
ξξ ALWAYS route cords and cables connected to
your television so they cannot be tripped over,
pulled or grabbed.
ξξ NEVER place a television set in an unstable
location.
ξξ NEVER place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set
to a suitable support.
ξξ NEVER place the television set on cloth or other
materials that may be located between the televi -
sion set and supporting furniture.
ξξ NEVER place items that might tempt children
to climb, such as toys and remote controls, on
the top of the television or furniture on which the
television is placed.
ξξ The equipment is only suitable for mounting at
ξξξξξξξξξξξξξ
If the existing television set is going to be retained
and relocated, the same considerations as above
should be applied.
β β β β β β β β β β β β
Apparatus connected to the protective earthing of the
building installation through the MAINS connection
or through other apparatus with a connection to
protective earthing β and to a television distribution
system using coaxial cable, may in some circumstan -
ces create a fire hazard. Connection to a television
distribution system has therefore to be provided
through a device providing electrical isolation below
a certain frequency range (galvanic isolator)
WALL MOUNTING WARNINGS
ξξ Read the instructions before mounting your TV
on the wall.
ξξ The wall mount kit is optional. You can obtain from
your local dealer, if not supplied with your TV.
ξξ Do not install the TV on a ceiling or on an inclined
wall.
ξξ Use the specified wall mounting screws and other
accessories.
ξξ Tighten the wall mounting screws firmly to prevent
the TV from fall. Do not over-tighten the screws.
Figures and illustrations in this user manual are
provided for reference only and may differ from the
actual product appearance. Product design and
specifications may be changed without notice.
Environmental Information
This television is designed to be environment friendly.
To reduce energy consumption, you can follow these
steps:
If you set the Energy Saving to , Minimum Medium,
Maximum Auto or the TV will reduce the energy
consumption accordingly. If you like to set the
Backlight Custom to a fixed value set as and adjust
the Backlight (located under the Energy Saving
setting) manually using Left or Right buttons on the
remote. Set as to turn this setting off. Off
Note: Available Energy Saving options may differ depending
on the selected in the menu.Mode Settings>Picture
The Energy Saving settings can be found in the Set-
tings>Picture menu. Note that some picture settings
will be unavailable to be changed.
If pressed Right button or Left button consecutively,
βScreen will be off in 15 seconds.ξ΄ξξξξξξξξξξοξξξξ
ξξ
ξοξξξξξξξξξξξξξξξξξξξξξξξξΆξξξξξξProceed and press
OK to turn the screen off immediately. If you donβt
press any button, the screen will be off in 15 seconds.
Press any button on the remote or on the TV to turn
the screen on again.
Note: Screen Off option is not available if the Mode is set
to . Game
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.
Features
ξξ Remote controlled colour TV
ξξ Fully integrated digital terrestrial/cable/satellite TV
(DVB-T-T2/C/S2)
ξξ HDMI inputs to connect other devices with HDMI
sockets
ξξ USB input
English - 4 -
β’ξ OSD menu system
β’ξ Back AV inputs for external devices (such as DVD
Players, PVR, video games, etc.)
β’ξ Stereo sound system
β’ξ Teletext
β’ξ Headphone connection
β’ξ Automatic programming system
β’ξ Manual tuning
β’ξ Automatic power down after up to eight hours
β’ξ Sleep timer
β’ξ Child lock
β’ξ Automatic sound mute when no transmission
β’ξ NTSC playback
β’ξ AVL (Automatic Volume Limiting)
β’ξ PLL (Frequency Search)
β’ξ PC input
β’ξ Game Mode (Optional)
β’ξ Picture off function
β’ξ Programme recording
β’ξ Programme timeshifting
β’ξ Ethernet (LAN) for Internet connectivity and service
β’ξ 802.11 a/b/g/n built in WLAN Support
β’ξ Audio Video Sharing
β’ξ HbbTV
High Dynamic Range (HDR) / Hybrid Log-Gamma
(HLG)
Using this feature the TV can reproduce greater
dynamic range of luminosity by capturing and then
combining several different exposures. HDR/HLG
promises better picture quality thanks to brighter, more
realistic highlights, more realistic colour and other
improvements. It delivers the look that filmmakers
intended to achieve, showing the hidden areas of
dark shadows and sunlight with full clarity, colour and
detail. HDR/HLG contents are supported via native
and market applications, HDMI, USB inputs and over
DVB-S broadcasts.
Accessories Included
β’ξ Remote Control
β’ξ Instruction Book
Standby Notifications
If the TV does not receive any input signal (e.g. from
an aerial or HDMI source) f nutes, it will go or 3 mi
into standby. When you next switch-on, the following
message will be displayed: βTV switched to stand-by
mode automatically because there was no signal
for a long time.β You can disable this functionality by
setting the option in the No Signal Timer Settings>
System>Device Settings menu accordingly.
The Auto Power Down option(in the Settings System >
>More menu) could have been set to a value between
1 and 8 hours by default. If this setting is not set as Off
and the TV has been left on and not been operated
during the set time, it will switch into standby mode
after the set time has expired. When you next switch-on
the TV, the following message will be displayed. βTV
switched to stand-by mode automatically because
no operation was made for a long time.β Before the
TV switches into standby mode a dialogue window will
be displayed. If you do not press any button the TV
will switch into the standby mode after a waiting period
of about 5 minutes. You can highlight and press Yes
OK to switch the TV into standby mode immediately.
If you highlight and press , the TV will remain No OK
on. You can also choose to cancel the Auto Power
Down Disablefunction from this dialogue. Highlight
and press , the TV will remain on and the function OK
will be cancelled. You can enable this function again by
changing the setting of the option Auto Power Down
from the menu. Settings>System>More
TV Control Button & Operation
Note: The position of the control button may differ depending
on the model.
Your TV has a single control button. This button allows
you to control the Standby-On / Source / Programme
and Volume functions of the TV.
Operating with the Control Button
β’ξ Press the control button to display the function
options menu.
β’ξ Then press the button consecutively to move the
focus to the desired option if needed.
β’ξ Press and hold the button for about 2 seconds to
activate the selected option. The icon colour of the
option changes when activated.
β’ξ Press the button once again to use the function or
enter the sub menu.
β’ξ To select another function option, you will need to
deactivate the last activated option first. Press and
hold the button to deactivate it. The icon colour of
the option changes when deactivated.
English - 5 -
ξξ To close the function options menu do not press the
button for a period of about 5 seconds. The function
options menu will disappear.
To turn the TV off: Press the control button to display
the function options menu, the focus will be on the
Standby option. Press and hold the button for about
2 seconds to activate this option. The icon colour of
the option changes when activated. Then press the
button once again to turn the TV off.
To turn on the TV: Press the control button, the TV
will turn on.
To change volume: Press the control button to display
the function options menu and then press the button
consecutively to move the focus to Volume + or
Volume - option. Press and hold the button for about
2 seconds to activate the selected option. The icon
colour of the option changes when activated. Then
press the button to increase or decrease the volume.
To change channel: Press the control button to
display the function options menu and then press the
button consecutively to move the focus to Programme
+ or option. Press and hold the button Programme -
for about 2 seconds to activate the selected option.
The icon colour of the option changes when activated.
Then press the button to switch to the next or previous
channel in the channel list.
To change source: Press the control button to display
the function options menu and then press the button
consecutively to move the focus to option. Source
Press and hold the button for about 2 seconds to
activate this option. The icon colour of the option
changes when activated. Then press the button once
again to display the sources list. Scroll through the
available sources by pressing the button. TV will
automatically switch to the highlighted source.
Note: Main menu OSD cannot be displayed via the control
button.
Operation with the Remote Control
Press the Menu button on your remote control to
display main menu. Use the directional buttons and
OK Return/Back button to navigate and set. Press
or button to quit a menu screen.Menu
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press the
Source button on your remote control consecutively
to select the different sources.
Changing Channels and Volume
You can change the channel and adjust the volume
by using the Programme +/- and Volume +/- buttons
on the remote.
Using Main TV Menu
When the button is pressed, the main TV menu Menu
will appear on the screen. You can navigate through
the menu items using the directional buttons on the
remote. To select an item or see the sub-menu options
of the highlighted menu press button. When you OK
highlight a menu option some of the sub-menu items
of this menu may appear on the upper side of the
menu bar for quick access. To use a quick access item
highlight it, press and set as desired using the Left/OK
Right directional buttons. When finished press or OK
Back/Return button to exit.
You can also see information on location, weather,
time and date on the main TV menu screen. The green
small icons indicate the current status for time, network
and sync for apps. If these icons appear in green, it
means that the time information is updated, network
is connected and sync is completed in success.
Otherwise the icons will appear in white.
Press button to close the main menu.Exit
1. Home
When main menu is opened menu bar will be Home
highlighted. The content of the menu can be Home
ξξξξξξξξξξξξ ξ¬ξξ ξξξξξξ ξξξ ξξξ ξξξξΉs go to the menu, TV
highlight the option and press Edit Home OK. The
Home menu will switch to edit mode. In edit mode
you can delete or change the position of any item in
the . Home menu. Highlight an option and press OK
Select Delete or Move option and press OK. In order
to move a menu item use the Right, Left, Up and Down
direction buttons to select the position that you want
the item to move to and press .OK
You can also add options from other menus to Home
menu. Just highlight an option and press the Down
direction button on the remote. If you see Add to Home
option you can add it to the menu.Home
2. Search
You can search for Channels, Guide, TV menus,
Applications, Web, YouTube and Videos using this
option. Press and enter a key word using the virtual OK
keyboard. Then highlight OK and press to start OK
the search. Results will be displayed on the screen.
Highlight the desired result using the directional
buttons and press to open.OK
3. TV
3.1. Guide
You can access the electronic programme guide menu
using this option. Refer to Electronic Programme
Guide section for more information.
3.2. Channels
You can access the menu using this option. Channels
Refer to section for more Using the Channel List
information.
3.3. Timers
You can set timers for future events using the options of
this menu. You can also review the previously created
timers under this menu.
English - 6 -
To add a new timer select the tab using the Add Timer
Left/Right buttons and press . Set the sub-menu OK
options as desired and when finished press OK. A new
timer will be created.
To edit a previously created timer, highlight that timer,
select the tab and press Edit Selected Timer OK.
Change the sub-menu options as desired and press
OK to save your settings.
To cancel an already set timer, highlight that timer,
select Delete Selected Timer tab and press OK. A
confirmation message will be displayed. Highlight Yes
and press to proceed. The timer will be cancelled.OK
It is not possible to set timers for two or more events
that will broadcasted in different channels at the same
time interval. In this case you will be asked to choose
one of these timers and cancel others. Highlight the
timer you want to cancel and press OK, Options menu
will be displayed. Then highlight and press Set/Cancel
OK to cancel that timer. You will have to save changes
after that. In order to do that press , highlight OK Save
Changes OK and press again.
3.4. Recordings
You can manage your recordings using the options
of this menu. You can playback, edit, delete or sort
previously recorded events. Highlight a tab by using
the Left or Right direction button and press to see OK
available options.
3.5. More Apps
In order to manage the apps installed on your TV,
you can use this option. Highlight and press OK. You
can add an installed app to menu, launch or Home
remove it. Highlight an app and press to see the OK
available options.
3.6. Market
You can add new apps from the application market
using this option. Highlight and press OK. Available
apps will be displayed. You can also access the
application market from within the menu.More Apps
3.7. Accessibility
You can access the accessibility settings menu directly
using this option.
3.8. Privacy Settings
You can access the privacy settings menu directly
using this option. This option may not be available
depending on the model of your TV and the selected
country during the first time installation process.
4. Settings
You can manage the settings of your TV using the
options of this menu. Refer to Settings Menu Content
section for more information.
You can reset your customisations on the menu Home
to defaults using the option (availability Reset Apps
depends on TV model and its features). Highlight and
press OK. A confirmation message will be displayed.
Highlight Yes and press to proceed. Note that you OK
will not be able to perform this operation again within
the next few minutes.
5. Sources
You can manage your input source preferences using
the options of this menu. To change the current source
or use your TV as a wireless display device highlight
one of the options and press . OK
5.1. Source Settings
You can access the source settings menu directly using
ξξξξξξξξξξξξξξ¨ξοξξξξξξξξξξξξξξξξξ
ξξξξξξξοξξξ
ξξξξξξξξξξξξ
ξξξξξξξξξξοξξξξ
Inserting the Batteries into the Remote
Remove the back cover to reveal the battery compart -
ment. You need to do the followings in order to do that:
ξξ Place the tip of a pen or some other pointed object in
the hole above the cover and press it down.
ξξ Then press firmly on the cover and slide in the
direction of the arrow.
Insert two size batteries. Make sure the (+) and AAA
(-) signs match (observe correct polarity). Do not mix
old and new batteries. Replace only with same or
equivalent type. Place the cover back on.
A message will be displayed on the screen when the
batteries are low and must be replaced. Note that when
the batteries are low, the performance of the remote
control may be impaired.
Batteries should not be exposed to excessive heat
such as sunshine, fire or the like.
Power Connection
IMPORTANT: The TV set is designed to operate on a
220-240V AC, 50 Hz supply. After unpacking, allow the
TV set to reach the ambient room temperature before
you connect the set to the mains. Plug the power cable
to the mains socket outlet.
Antenna Connection
Connect the aerial or cable TV plug to the aerial input
(ANT) socket or satellite plug to the satellite input (LNB)
socket located on the rear side of the TV.
Rear side of the TV
1
2
LNB
ANT
1. Satellite
English - 7 -
2. Aerial or cable
If you want to connect a device to the TV, make
sure that both the TV and the device are turned off
before making any connection. After the connection
is done, you can turn on the units and use them.
License Notification
The terms HDMI, HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator,
Inc.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
YouTube and the YouTube logo are trademarks of
Google Inc.
This product contains technology subject to certain
intellectual property rights of Microsoft. Use or
distribution of this technology outside of this product
is prohibited without the appropriate license(s) from
Microsoft.
Content owners use Microsoft PlayReadyβ’ content
access technology to protect their intellectual property,
including copyrighted content. This device uses
PlayReady technology to access PlayReady-protected
content and/or WMDRM-protected content. If the
device fails to properly enforce restrictions on content
usage, content owners may require Microsoft to revoke
the deviceβs ability to consume PlayReady-protected
content. Revocation should not affect unprotected
content or content protected by other content access
technologies. Content owners may require you to
upgrade PlayReady to access their content. If you
decline an upgrade, you will not be able to access
content that requires the upgrade.
The βCI Plusβ Logo is a trademark of CI Plus LLP.
This product is protected by certain intellectual property
rights of Microsoft Corporation. Use or distribution of
such technology outside of this product is prohibited
without a license from Microsoft or an authorized
Microsoft subsidiary.
Disposal Information
[European Union]
These symbols indicate that the electrical and
electronic equipment and the battery with this symbol
should not be disposed of as general household
waste at its end-of-life. Instead, the products should
be handed over to the applicable collection points for
the recycling of electrical and electronic equipment as
well as batteries for proper treatment, recovery and
recycling in accordance with your national legislation
and the Directive 2012/19/EU and 2013/56/EU.
By disposing of these products correctly, you will help
to conserve natural resources and will help to prevent
potential negative effects on the environment and
human health which could otherwise be caused by
inappropriate waste handling of these products.
For more information about collection points and
recycling of these products, please contact your
local municipal office, your household waste disposal
service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
[Business users]
If you wish to dispose of this product, please contact
your supplier and check the terms and conditions of
the purchase contract.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
Contact your local authority to learn about disposal
and recycling.
The product and packaging should be taken to your
local collection point for recycling.
Some collection points accept products free of charge.
Note: The sign Pb below the symbol for batteries indicates
that this battery contains lead.
1 2
1. Products
2. Battery
English - 8 -
Specification
TV Broadcasting PAL BG/I/DK
SECAM BG/DK
Receiving Channels VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
Digital Reception
Fullyξintegratedξdigitalξ
terrestrial-cable-satelliteξ
TV(DVB-T2-C-S2)
(DVB-T2, DVB-S2
compliant)
Number of Preset
Channels 11 000
Channel Indicator On Screen Display
RF Aerial Input 75 Ohm (unbalanced)
Operating Voltage 220-240V AC, 50Hz.
Audio German+Nicam Stereo
Audio Output Power
(WRMS.) (10% THD) 2 x 8
Power Consumption (W) 75W
Networked Standby Mode
Power Consumption (W) < 2
TV Dimensions DxLxH
(with stand) (mm) 258 x 973 x 619
TV Dimensions DxLxH
(without stand) (mm) 56/82 x 973 x 567
Display 43β
Operation temperature
and operation humidity
0ΒΊC up to 40ΒΊC, 85%
humidity max
Wireless LAN Transmitter Specifications
Frequency Ranges Max Output Power
2400 - 2483,5 MHz (CH1-CH13) < 100 mW
5150 - 5250 MHz (CH36 - CH48) < 200 mW
5250 - 5350 MHz (CH52 - CH64) < 200 mW
5470 - 5725 MHz (CH100 -
CH140) < 200 mW
Country Restrictions
This device is intended for home and office use in all
EU countries (and other countries following the rele -
vant EU directive) without any limitation except for the
countries mentioned below.
Country Restriction
Bulgaria General authorization required for outdoor
use and public service
Italy If used outside of own premises, general
authorization is required
Greece In-door use only for 5470 MHz to 5725
MHz band
Luxembourg General authorization required for network
and service supply(not for spectrum)
Norway
Radio transmission is prohibited for the
geographical area within a radius of 20 km
from the centre of Ny-Γ
lesund
Russ ian Fe-
deration In-door use only
Israel 5 GHz band only for 5180 MHz-5320
MHz range
The requirements for any country may change at
any time. Itβs recommended that user checks with
local authorities for the current status of their national
regulations for 5 GHz wireless LANβs.
English - 9 -
Remote Control
4
1
3
6
7
9
11
13
14
15
5
26
25
24
23
19
18
17
16
8
2
21
22
10 20
12
1. Standby: Switches On / Off the TV
2. Numeric buttons: Switches the channel, enters
a number or a letter in the text box on the screen.
3. Language: Switches among sound modes (an-
alogue TV), displays and changes audio/subtitle
language and turns subtitles on or off (digital TV,
where available)
4. Mute: Completely turns off the volume of the TV
5. Volume +/-
6. Guide: Displays the electronic programme guide
7. Directional buttons: Helps navigate menus,
content etc. and displays the subpages in TXT
mode when pressed Right or Left
8. OK: Confirms user selections, holds the page (in
TXT mode), views menu (DTV mode)Channels
9. Back/Return: Returns to previous screen, previous
menu, opens index page (in TXT mode). Quickly
cycles between previous and current channels
or sources
10. Netflix: Launches the Netflix application
11. My Button 1 (*)
12. Coloured Buttons: Follow the on-screen instruc-
tions for coloured button functions
13. Rewind: Moves frames backwards in media such
as movies
14. Record: Records programmes
15. Play: Starts to play selected media
16. Pause: Pauses the media being played, starts
timeshift recording
17. Stop: Stops the media being played
18. Fast Forward: Moves frames forward in media
such as movies
19. Prime Video: Launches the Amazon Prime Video
application
20. YouTube: Launches the YouTube application
21. Exit: Closes and exits from displayed menus or
returns to previous screen
22. Info: Displays information about on-screen content,
shows hidden information (reveal - in TXT mode)
23. Menu: Displays TV menu
24. Programme +/-
25. Text: Displays teletext (where available), press
again to superimpose the teletext over a normal
broadcast picture (mix)
26. Source: Shows available broadcast and content
sources
(*) MY BUTTON 1:
This button may have default function depending on the
model. However you can set a special function to this
button by pressing on it for more than three seconds
when on a desired source, channel or application. A
confirmation message will be displayed on the screen.
Now the My Button 1 is associated with the selected
function.
Note that if you perform , My First Time Installation
Button 1 will return to its default function.
English - 10 -
Connections
Connector Type Cables Device
VGA
Connection
(back)
AUDIO IN PC/YPbPr
Audio
Connection
(back) YPbPr/PC Audio Cable
HDMI
Connection
(side&back)
SPDIF SPDIF
(Optical Out)
Connection
(back)
BACK AV Back AV
(Audio/Video)
Connection
(back) Audio Video Cable
HEADPHONE Headphone
Connection
(side)
YPBPR YPbPr Video
Connection
(back) PC to YPbPr Connection Cable
USB
Connection
(side)
CI
Connection
(side)
CAM
module
LAN Ethernet
Connection
(back) LAN / Ethernet Cable
See the illustrations on the left
side. You can use YPbPr to VGA
cable to enable YPbPr signal via
VGA input. You cannot use VGA
and YPbPr at the same time. To
enable PC/YPbPr audio, you will
need to use the back audio inputs
with a YPbPr/PC audio cable for
audio connection. When using
the wall mounting kit (available
from a third party in the market,
if not supplied), we recommend
that you plug all your cables into
the back of the TV before mounting
on the wall. Insert or remove the
CI module only when the TV is
SWITCHED OFF. You should refer
to the module instruction manual
for details of the settings. The/
Each USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your TV.
When connecting equipment using a
HDMI cable to your TV, to guarantee
sufficient immunity against parasitic
frequency radiation, you have to use
a high speed shielded (high grade)
HDMI cable with ferrites.
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
English - 11 -
Switching On/Off
To Switch the TV On
Connect the power cord to a power source such as a
wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
β’ξ Press the button, or a Standby Programme +/-
numeric button on the remote control.
β’ξ Press the control button on the TV.
To Switch the TV Off
β’ξ Press the button on the remote control.Standby
β’ξ Press the control button on the TV, the function
options menu will be displayed. The focus will be
on the option. Press and hold the button Standby
for about 2 seconds to activate this option. The icon
colour of the option will change. Then press the
button once again, the TV will switch into standby
mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched into standby mode, the standby
LED can blink to indicate that features such as Standby Mode
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press . In the following steps of OK
the installation guide, set your preferences using the
directional buttons and button.OK
After the language selection, you will be asked whether
you want to change accessibility settings. Highlight
Yes and press to change. Refer to OK System Menu
Content section for detailed information on available
options.
Set your country preference on the next screen.
Depending on the selection you may be asked Country
to set and confirm a PIN at this point. The selected PIN
cannot be 0000. You have to enter it if you are asked
to enter a PIN for any menu operation later.
You can activate option in the next step. Store Mode
This option will configure your TVβs settings for store
environment and depending on the TV model being
used, the supported features of it may be displayed on
the screen as an info banner. This option is intended
only for store use. It is recommended to select Home
Mode for home use. This option will be available in
Settings>System>More menu and can be turned off/
on later. Make your selection and press to continue. OK
The picture mode selection screen will then be
displayed. In order for your TV to consume less
energy and be more environmentally friendly select
Natural OK and press to continue. You can change
your selection later using the option in the Mode
Settings>Picture menu.
Depending on the model of your TV and the country
selection Privacy Settings menu may appear at
this point. Using this menu you can set your privacy
privileges. Highlight a feature and use Left and
Right directional buttons to enable or disable. Read
the related explanations displayed on the screen
for each highlighted feature before making any
changes. You can use buttons to Programme +/-
scroll up and down to read the entire text. You will
be able to change your preferences at any time
later from the Settings>System>Privacy Settings
menu. If the option is disabled Internet Connection
Network/Internet Settings screen will be skipped
and not displayed. If you have any questions,
complaints or comments regarding this privacy
policy or its enforcement, please contact by email at
smarttvsecurity@vosshub.com.
Highlight Next and press OK button on the remote
control to continue and the Network/Internet Settings
menu will be displayed. Please refer to Connectivity
section to configure a wired or a wireless connection.
If you want your TV to consume less power in standby
mode, you can disable the Networked Standby
Mode Off option by setting it as . After the settings
are completed highlight and press button Next OK
to continue.
On next screen you can set broadcast types to be
searched, set your encrypted channel searching
and time zone (depending on the country selection)
preferences. Additionally you can set a broadcast
type as your favourite one. Priority will be given to the
selected broadcast type during the search process
and the channels of it will be listed on the top of the
channel list. When finished, highlight and press Next
OK to continue.
About Selecting Broadcast Type
To turn a search option for a broadcast type highlight
it and press . The checkbox next to the selected OK
option will be checked. To turn the search option off
clear the checkbox by pressing after moving the OK
focus on the desired broadcast type option.
Digital Aerial: D. Aerial If broadcast search option
is turned on, the TV will search for digital terrestrial
broadcasts after other initial settings are completed.
Digital Cable: D. Cable If broadcast search option
is turned on, the TV will search for digital cable
broadcasts after other initial settings are completed.
A message will be displayed before starting to search
asking if you want to perform cable network search. If
you select and press you can select Yes OK Network
or set values such as and Frequency, Network ID
Search Step on the next screen. If you select No
and press you can set OK Start Frequency Stop ,
Frequency and Search Step on the next screen.
English - 12 -
When finished, highlight and press button Next OK
to continue.
Note: Searching duration will change depending on the
selected .Search Step
Satellite: If Satellite broadcast search option is turned
on, the TV will search for digital satellite broadcasts
after other initial settings are completed. Before
satellite search is performed some settings should be
made. Antenna Type menu will be displayed first. You
can select Antenna Type Single Satellite as Direct,
Cable or by using Left or Right DiSEqC switch
buttons. After selecting your antenna type press to OK
see the options to proceed. Continue Transponder ,
list and options will be available. You Configure LNB
can change the transponder and LNB settings using
the related menu options.
β’ Direct: If you have a single receiver and a direct
satellite dish, select this antenna type. Press to OK
continue. Select an available satellite on the next
screen and press to scan for services. OK
β’ Single Satellite Cable: If you have multiple
receivers and a single satellite cable system, select
this antenna type. Press to continue. Configure OK
settings by following instructions on the next screen.
Press to scan for services.OK
β’ DiSEqC switch: If you have multiple satellite dishes
and a , select this antenna type. Then DiSEqC switch
set the DiSEqC version and press to continue. OK
You can set up to four satellites (if available) for
version v1.0 and sixteen satellites for version v1.1
on the next screen. Press button to scan the first OK
satellite in the list.
Analogue: If Analogue broadcast search option is
turned on, the TV will search for analogue broadcasts
after other initial settings are completed.
After the initial settings are completed TV will start
to search for available broadcasts of the selected
broadcast types.
While the search continues current scan results will
be displayed at the bottom of the screen. After all the
available stations are stored, menu will be Channels
displayed. You can edit the channel list according to
your preferences using the tab options or press Edit
the button to quit and watch TV.Menu
While the search continues a message may appear,
asking whether you want to sort channels according
to the LCN . Select and press to confirm(*) Yes OK .
(*) LCN is the Logical Channel Number system that organizes
available broadcasts in accordance with a recognizable
channel number sequence (if available).
Note: Do not turn off the TV while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Media Playback via USB Input
You can connect 2.5β and 3.5β inch (HDD with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.
IMPORTANT! Back up the files on your storage devices
before connecting them to the TV. Manufacturer will
not be responsible for any file damage or data loss.
Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32 and
NTFS disk formatting but recording will not be available
with NTFS formatted disks.
While formatting USB hard drives which have
more than 1TB (Tera Byte) storage space you may
experience some problems in the formatting process.
Wait a little while before each plugging and unplugging
as the player may still be reading files. Failure to do
so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive
while playing a file.
You can use USB hubs with your TVβs USB inputs.
External power supplied USB hubs are recommended
in such a case.
It is recommended to use the TVβs USB input(s)
directly, if you are going to connect a USB hard disk.
Note: When viewing image files the menu Media Browser
can only display 1000 image files stored on the connected
USB device.
USB Recording
Recording a Programme
IMPORTANT: When using a new USB hard disk
drive, it is recommended that you first format the
disk using your TVβs option in the Format Disk
TV>Recordings>Settings menu.
To record a programme, you should first connect a USB
disk to your TV while the TV is switched off. You should
then switch on the TV to enable the recording feature.
To use recording your USB drive should have 2 GB free
space and be USB 2.0 compatible. If the USB drive
is not compatible an error message will be displayed.
To record long duration programmes such as movies, it
is recommended to use USB Hard disk drives (HDDβs).
Recorded programmes are saved into the connected
USB disk. If desired, you can store/copy recordings
onto a computer; however, these files will not be
available to be played on a computer. You can play
the recordings only via your TV.
Lip Sync delay may occur during the timeshifting. Radio
record is supported. The TV can record programmes
up to ten hours.
Recorded programmes are split into 4GB partitions.
If the writing speed of the connected USB disk is not
sufficient, the recording may fail and the timeshifting
feature may not be available.
English - 13 -
It is recommended to use USB hard disk drives for
recording HD programmes.
Do not pull out the USB/HDD during a recording. This
may harm the connected USB/HDD.
If the AC cord is unplugged while there is an active
USB-recording timer setting, it will be cancelled.
Multipartition support is available. A maximum of two
different partitions are supported. The first partition
of the USB disk is used for USB Recording ready
features. It also must be formatted as the primary
partition to be used for the USB Recording ready
features.
Some stream packets may not be recorded because
of signal problems, as a result sometimes videos may
freeze during playback.
Record, Play, Pause, Display (for playlist dialogue) keys
can not be used when teletext is on. If a recording starts
from timer when teletext is on, teletext is automatically
turned off. Also teletext usage is disabled when there
is an ongoing recording or playback.
While recording a programme in the background you
can use menu options, switch to another source or use
Media Browser functions, such as viewing pictures,
playing video and music files, and even play back the
ongoing recording.
Timeshift Recording
Press Pause button while watching a broadcast to
activate timeshifting mode. In timeshifting mode, the
programme is paused and simultaneously recorded to
the connected USB disk.
Press Play button again to resume the paused
programme from where you stopped. Press the Stop
button to stop timeshift recording and return to the
live broadcast.
Timeshift cannot be used while in radio mode.
You can use the timeshift rewind feature after resuming
normal playback or fast forward option.
Instant Recording
Press Record button to start recording an event
instantly while watching a programme. Press Stop
button to cancel instant recording.
You can not switch broadcasts during the recording
mode. While recording a programme or during the
timeshifting, a warning message appears on the screen
if your USB device speed is not sufficient.
Watching Recorded Programmes
Select Recordings from the TV menu. Select a
recorded item from the list (if previously recorded).
Press the button to view the OK Options menu. Select
an option then press button.OK
Note: Viewing main menu and menu items will not be available
during the playback.
Press the button to stop a playback and return Stop
to the .Recordings
Slow Forward
If you press button while watching recorded Pause
programmes, the slow forward feature will be available.
You can use button to slow forward. Fast Forward
Pressing Fast Forward button consecutively will
change slow forwarding speed.
Recording Settings
You can configure your recording preferences using
the Settings tab in the TV>Recordings menu.
Highlight Settings Left Right tab by using or button
and press . Then select the desired item in the OK
sub-menu and set by using or button.Left Right
Start early: You can set recording timerβs starting
time to start earlier by using this setting.
End late: You can set recording timerβs end time to
end later by using this setting.
Max Timeshift: This setting allows you to set the
maximum duration for the timeshift recording.
Available options are approximate and the actual
recording time may change in practice depending on
the broadcast. The reserved and free storage space
values will change according to this setting. Make
sure that you have enough free space otherwise
instant recording may not be possible.
Auto discard: You can set the type as Discard
None Oldest Longest Shortest, , or . If it is not
set to , you can set the option as None Unplayed
Included Excluded or . These options determine
the preferences for deleting the recordings in order
to obtain more storage space for ongoing records.
Hard disk information: You can view detailed
information about the USB storage device connected
to your TV. Highlight and press to see and press OK
Back/Return to close.
Format Disk: If you want to delete all files on the
connected USB storage device and convert the disk
format to FAT32, you can use this option. Press OK
button while the option is highlighted. Format Disk
A menu will appear on the screen, requiring you
to enter the PIN . After you enter the PIN, a (*)
confirmation message will be displayed. Select Yes
and press to start formatting the USB storage OK
device. Select and press to cancel. No OK
(*) 0000 1234 Default PIN could have been set to or . If you
have defined the PIN(is requested depending on the country
selection) during the use the PIN First Time Installation
that you have defined.
IMPORTANT: Formatting your USB drive will erase
ALL the data on it and itβs file system will be converted
to FAT32. In most cases operation errors will be fixed
after a format but you will lose ALL your data.
If βUSB disk writing speed too slow to recordβ
message is displayed on the screen while starting a
recording, try restarting the recording. If you still get
the same error, it is possible that your USB disk does
English - 14 -
not meet the speed requirements. Try connecting
another USB disk.
Media Browser
You can play back music and movie files and display
photo files stored on a USB storage device by
connecting it to your TV. Connect a USB storage device
to one of the USB inputs located on the side of the TV.
After connecting a USB storage device to your TV, the
Sources bar will be displayed with USBx highlighted.
Press OK, Media Browser menu will be displayed on
the screen. Select the file of your choice and press OK
to display or play it back. You can access the content
of the connected USB device any time later from the
Sources menu. You can also press the button Source
on the remote and then select your USB storage device
from the list of sources.
You can set your media browser preferences by using
the Settings menu. Settings menu can be accessed
via the information bar which is displayed on the
bottom of the screen while playing back a video or
an audio file or displaying a picture file. Press the
Info button if the information bar has disappeared,
highlight the gear wheel symbol positioned on the
right side of the information bar and press OK. Picture
Settings, Sound Settings, Media Browser Settings
and Options menus may be available depending on
the media file type and the model of your TV and its
features. The content of these menus may also differ
according to the type of the currently open media file.
Only Sound Settings menu will be available while
playing back audio files.
Loop/Shuffle Mode Operation
Start playback and activate
All files in the list will be
continuously played in
original order
Start playback and activate
The same file will be
played continuously
(repeat)
Start playback and activate
All files in the list will be
played once in random
order
Start playback and activate ,
All files in the list will be
continuously played in
the same random order
To use the functions on the information bar highlight the
symbol of the function and press . To change the OK
status of a function highlight the symbol of the function
and press as much as needed. If the symbol is OK
marked with a red cross, that means it is deactivated.
FollowMe TV
With your mobile device you can stream the current
broadcast from your smart TV using the FollowMe
TV feature. Install the appropriate Smart Center
application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.
Note: Depending on model, your TV may not support this
function. The application may not be compatible with all mobile
devices. UHD (4K, Ultra HD) channels are not supported and
both of the devices must be connected to the same network.
CEC
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.
The CEC option in the Settings>System>Device
Settings Enabled menu should be set as at first. Press
the Source button and select the HDMI input of the
connected CEC device from the menu. Sources List
When new CEC source device is connected, it will be
listed in source menu with its own name instead of
the connected HDMI ports name(such as DVD Player,
Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected. To terminate this operation and control
the TV via the remote again, press and hold the β0-
Zeroβ button on the remote control for 3 seconds.
You can disable the CEC functionality by setting the
related option under the Settings>System>Device
Settings menu accordingly.
The TV supports ARC (Audio Return Channel). This
feature is an audio link meant to replace other cables
between the TV and an audio system (A/V receiver or
speaker system).
When ARC is active, the TV will mute its other audio
outputs, except the headphone jack, automatically
and volume control buttons are directed to connected
audio device. To activate ARC set the Sound Output
option in the menu as . Settings>Sound HDMI ARC
Note: ARC is supported only via the HDMI2 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with the
TV. The volume can be controlled using the remote
control of the TV. To activate this feature set the
Sound Output Settings>Sound option in the menu
as . When HDMI ARC HDMI ARC option is selected,
CEC Enabled option will be set as automatically, if it
is not already set. The TV speakers will be muted and
the sound of the watched source will be provided from
the connected sound system.
Note: The audio device should support System Audio Control
feature.
English - 15 -
E-Manual
You can find instructions for your TVβs features in the
E-Manual.
To access the E-Manual, enter menu, select Settings
Manuals OK Menu and press . For quick access press
button and then button.Info
By using the directional buttons select a desired
category. Every category includes different topics.
Select a topic and press to read instructions.OK
To close the E-Manual screen press the or Exit Menu
button.
Note: Depending on model, your TV may not support this
function. The contents of the E-Manual may vary according
to the model.
English - 16 -
Settings Menu Content
Picture Menu Content
Mode You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Cinema Game, (optional), Sports Dynamic , and Natural.
Contrast
Adjusts the light and dark values on the screen.
Brightness
Adjusts the brightness values on the screen.
Sharpness
Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colours.
Energy Saving
For setting the to Energy Saving Custom Minimum Medium Maximum Auto, , , , ,
Screen Off Off or .
Note: ModeAvailable options may differ depending on the selected .
Backlight This setting controls the backlight level. The backlight function will be inactive if the
Energy Saving Custom is set to an option other than .
Picture Zoom Sets the desired image size format.
Picture Shift This option may be available depending on the setting. Highlight and Picture Zoom
press , then use directional buttons to shift the picture upwards or downwards.OK
PC Position Appears only when the input source is set to VGA/PC.
Autoposition If the image is not centered in VGA mode use this option to automatically adjust the
position of the image. Press to start the auto adjustment.OK
H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.
V Position This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase Depending on the input source(computer etc.) you may see a hazy or noisy picture on
the screen. You can use phase to get a clearer picture by trial and error.
Advanced Settings
Dynamic
Contrast
You can change the dynamic contrast ratio to desired value.
Colour Temp Sets the desired colour temperature value. Cool Normal, , Warm Custom and options
are available.
White Point If the Colour Temp option is set as Custom, this setting will be available. Increase the
βwarmthβ or βcoolnessβ of the picture by pressing Left or Right buttons.
Blue Stretch White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as to enable.On
Micro Dimming Low Medium High Off Micro, , and options are available. While Dimming is active, it
will enhance contrast locally for each defined zone.
Noise Reduction Low, Medium, High Off and options are available. If the signal is weak and the picture
is noisy, use the setting to reduce the amount of noise.Noise Reduction
Film Mode Films are recorded at a different number of frames per second to normal television programmes.
Turn this feature on when you are watching films to see the fast motion scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
Colour Tuner Opens colour tuner settings. Set the Colour Tuner as enabled to adjust the Hue, Colour
and values manually.Brightness
English - 17 -
Gamut Mapping
You can use this option to set the range of colours displayed on your TV screen. When
set as , colours are set according to the source signal. When set as On Off, the TVβs
maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
HDMI Full Range While watching from a HDMI source, this feature will be visible. You can use this feature
to enhance blackness in the picture.
Reset Resets the picture settings to factory default settings (except mode).Game
While in VGA (PC) mode, some items in menu will be unavailable. Instead, VGA mode settings will be added to the menu Picture Picture
while in PC mode.
Sound Menu Content
Dolby Audio Smart Movie Music News Off Off, , , and options will be available. Set as to disable.
Note: Sound Some items in menu will be grayed out and unavailable if set to an option other than Off.
Surround Sound Surround Sound mode can be changed as or .On Off
Sound Output
Sets the sound output preference. TV S/PDIF , , HDMI ARC, Headphone Only and
Lineout options will be available. There will be no sound output except through the
selected option and the headphone jack.
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as . If you have connected headphones to the TV, set this Lineout
option as Please ensure before using headphones that this menu Headphone Only.
item is set to . If it is set to , the output from the headphone Headphone Only Lineout
socket will be set to maximum which could damage your hearing.
If option is selected, feature will be enabled. HDMI ARC CEC
Note: Sound Depending on the selected option some items in menu will appear as grayed out and will be
unavailable.
AVL (Automatic
Volume Limiting)
Sets the sound to obtain fixed output level between programmes.
If the menu item is set to an option other than the setting options Dolby Audio Off AVL
will change. and options will be available. In mode the Auto Night Normal, , Off Auto
TV will switch to or mode automatically according to the current time Normal Night
information. If no time information is available this option will always function as Normal.
When the TV switches to mode for the first time after setting this option as Night Auto,
an information bar will pop up on the screen.
Please note that compared to mode mode provides more aggressive Normal Night
dynamic compression control which is suitable for silent environments.
Advanced Settings
Equalizer Selects the equalizer mode. Custom settings can be made only when in mode.User
Dynamic Bass Enables or disables the Dynamic Bass.
Sound Mode You can select a sound mode (If the viewed channel supports).
Digital Out Sets digital out audio type.
Headphone
Sets headphone volume. This option will not be available if the Sound Output option
is set as .Lineout
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Balance
Sets sound balance. This feature will be activated if option is set as Sound Output
TV or Headphone Only. Balance item adjusts the balance level of the TV speakers
and headphone together.
Reset Resets some of the sound settings to factory defaults.
English - 18 -
Network Menu Content
Network Type
Disable the network connection or change the connection type.
Scan Wireless
Networks
Start a search for wireless networks. This option will be available if the Network Type
is set as .Wireless Device
Disconnect
To disconnect from a wireless network and delete your saved wireless network profile (if
previously saved), highlight this option and press . This option will not be available OK
if you did not connect to a wireless network. Refer to section for more Connectivity
information.
Press WPS on your
wifi router
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press . Go to your modem/router device and press the OK
WPS button on it to make the connection. This option will be available if the Network
Type Wireless Device is set as .
Internet Speed Test Start a speed test to check your connection bandwidth. The result will be displayed on
the screen when finished.
Advanced Settings
Change the IP and DNS configurations of your TV.
Networked Standby
Mode
Enable or disable this feature by setting it as or .On Off
Note: Connectivity For detailed information on the options of this menu refer to the section.
Installation Menu Content
Automatic channel
scan (Retune)
Displays automatic tuning options. Searches and stores aerial DVB stations. D. Aerial:
D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
analogue stations. Satellite:ξSearchesξandξstoresξsatelliteξstations.
Manual channel
scan This feature can be used for direct broadcast entry.
Network channel
scan
Searches for the linked channels in the broadcast system. Searches for aerial D. Aerial:
network channels. Searches for cable network channels. D. Cable: Satellite: Searches
for satellite network channels.
Analogue fine tune
You can use this setting for fine tuning analogue channels. This feature is not available
if no analogue channels are stored and if currently watched channel is not an analogue
channel.
Satellite Settings
Displays satellite settings. Displays available satellites. You can Satellite list: Add,
Delete Edit satellites or satellite settings on the list. Antenna installation: You can
change satellite antenna settings and/or start a satellite scan.
Installation Settings
(optional)
Displays installation settings menu. Your TV will search for Standby Mode Search (*):
new or missing channels while in standby. Any new found broadcasts will be shown.
Dynamic Channel Update(*): If this option is set as Enabled, the changes on the
broadcasts such as frequency, channel name, subtitle language etc., will be applied
automatically while watching.
(*) Availability depends on model.
Clear Service List Use this setting to clear channels stored. This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or Finland.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to be
listed in the channel list. This feature is available only for the country option of Norway.
Signal Information You can use this menu item to monitor signal related information such as signal level/
quality, network name etc for available frequencies.
First time installation Deletes all stored channels and settings, resets TV to factory settings.
English - 20 -
Parental
Enter correct password to change parental settings. You can easily adjust Menu Lock,
Maturity Lock Child Lock , or Guidance in this menu. You can also set a new PIN
or change the using the related options.Default CICAM PIN
Note: Some menu options may not be available depending on the country selection in the First Time
Installation. Default PIN could have been set to 0000 or 1234. If you have defined the PIN(is requested
depending on the country selection) during the use the PIN that you have defined.First Time Installation
Date/Time
Sets date and time.
Sources
Edit the names, enable or disable selected source options.
Netflix
If this feature is supported by your TV, you can view your ESN(*) number and deactivate
Netflix.
(*) ESN number is an unique ID number for Netflix, created especially to identify your TV.
Samba ACR
Samba Interactive TV powers recommendations and other apps by gathering data
regarding consumption of specific on-screen content to enhance your viewing experience.
Using this option you can access Samba Interactive TV settings menu, review Samba
TV's Terms of Service, Privacy Policy and manage your advertising preferences, etc.
Internet connection will be required in order to access HTML based settings. You can
enable or disable Interactive TV at any time from the Settings>System>Privacy>Privacy
Settings menu by checking or unchecking the check box next to the related item. This
option may not be available depending on the selected country during the First Time
Installation process, the model of your TV and its features.
Device Settings
CEC With this setting you can enable and disable CEC functionality completely. Press Left
or Right button to enable or disable the feature.
CEC Auto Power
On
This function allows the connected HDMI-CEC compatible device to turn on the TV
and switch to its input source automatically. or button to enable or Press Left Right
disable the feature.
No Signal Timer
If your TV does not receive any input signal (e.g. from an aerial or HDMI source) for
3 minutes, it will go into standby mode. You can enable or disable this functionality by
setting this option accordingly.
More Displays other setting options of the TV.
Menu Timeout Changes timeout duration for menu screens.
Standby Mode
LED If set as the standby mode LED will not light up when the TV is in standby mode.Off
Software
Upgrade Ensures that your TV has the latest firmware. Press to see the menu options.OK
Application
Version
Displays current software version.
Auto Power
Down
Sets the desired time for the TV to automatically go into standby mode when not being
operated. This option can be set from 1 to 8 hours in steps of 1 hour. You can also
disable this option by setting as .Off
Subtitle Mode
This option is used to select which subtitle mode will be on the screen ( subtitle / DVB
Teletext DVB subtitle) if both is available. Default value is subtitle. This feature is available
only for the country option of Norway.
Biss Key
Biss is a satellite signal scrambling system that is used for some broadcasts. If you
need to enter Biss key on a broadcast, you can use this setting. Highlight Biss Key and
press to enter keys on the desired broadcast.OK
Store Mode Select this mode for store display purposes. Whilst is enabled, some items Store Mode
in the TV menu may not be available.
Audio Video
Sharing
This feature allows you to share files stored on your smartphone or tablet pc. If you have
a compatible smartphone or tablet pc and the appropriate software is installed, you can
share/play photos on your TV. See instructions of your sharing software for more information.
English - 23 -
database in accordance with the selected criteria.
Matching results will be listed.
Now: Displays current event of the highlighted
channel.
Zoom: OK Highlight and press to see events in a
wider time interval.
Now/Next Schedule
In this layout option, only the current and next events
of the listed channels will be displayed. You can use
the directional buttons to scroll through the list of the
events.
Press Back/Return button to use available tab options.
Highlight Filter tab and press OK to see the filtering
options. To change the layout highlight Timeline
Schedule OK and press .
Event Options
Use the directional buttons to highlight an event
and press button to display OK Options menu. The
following options are available.
Select Channel: Using this option, you can switch
to the selected channel in order to watch it. The
programme guide will be closed.
More Info: Display detailed information on the selected
event. Use up and down directional buttons to scroll
through the text.
Set Timer on Event / Delete Timer on Event: Select
Set Timer on Event option and press OK. You can set
timers for future events. To cancel an already set timer,
highlight that event and press the OK button. Then
select Delete Timer on Event option. The timer will
be cancelled.
Record / Delete Rec. Timer: Select the Record
option and press the button. If the event is going OK
to be broadcasted at a future time, it will be added
to Timers list to be recorded. If the selected event is
being broadcasted at the moment, recording will start
immediately.
To cancel an already set record timer, highlight that
event and press the button and select the option OK
Delete Rec. Timer. The record timer will be cancelled.
IMPORTANT: Connect a USB disk to your TV while the TV
is switched off. You should then switch on the TV to enable
the recording feature.
Notes: You cannot switch to any other channel while there is
an active recording or timer on the current channel.
It is not possible to set timer or record timer for two or more
individual events at the same time interval.
Teletext Services
Press the Text button to enter. Press again to activate
mix mode, which allows you to see the teletext page
and the TV broadcast at the same time. Press once
more to exit. If available, sections in the teletext pages
will become colour-coded and can be selected by
pressing the coloured buttons. Follow the instructions
displayed on the screen.
Digital Teletext
Press the Text button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the button. The operation method may differ OK
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the Text button is pressed again, the TV returns
to television broadcast.
Software Upgrade
Your TV is capable of finding and updating the firmware
automatically via the broadcast signal or via Internet.
Software upgrade search via user interface
On the main menu select and then Settings>System
More. Navigate to and press the Software upgrade
OK button. Then select and press Scan for upgrade
OK button to check for a new software upgrade.
If a new upgrade is found, it starts to download the
upgrade. After the download is completed, a warning
will be displayed, press button to complete software OK
upgrade process and restart TV.
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00 oβclock
if Automatic scanning option is set to Enabled and if
the TV is connected to an aerial signal or to Internet. If
a new software is found and downloaded successfully,
it will be installed at the next power on.
Note: Do not unplug the power cord while led is blinking during
the reboot process. If the TV fails to come on after the upgrade,
unplug, wait for two minutes then plug it back in.
All updates are automatically controlled. If a manual search
is carried out and no software is found then this is the current
version.
Troubleshooting & Tips
TV will not turn on
Make sure the power cord is plugged in securely to a
wall outlet. Press the Power button on the TV.
Poor picture
β’ξ Check if you have correctly tuned the TV.
β’ξ Low signal level can cause picture distortion. Please
check antenna connections.
β’ξ Check if you have entered the correct channel
frequency if you have performed manual tuning.
No picture
β’ξ TV is not receiving any signal. Make sure the correct
source has been selected.
β’ξ Is the antenna connected properly?
β’ξ Is the antenna cable damaged?
β’ξ Are suitable plugs used to connect the antenna?
β’ξ If you are in doubt, consult your dealer.
English - 24 -
No sound
β’ξ Check if the TV sound is muted. Press the Mute
button or increase the volume to check.
β’ξ Sound may be coming from only one speaker. Check
the balance settings from Sound menu.
Remote control - no operation
β’ξ The batteries may be exhausted. Replace the
batteries.
β’ξ The batteries maybe inserted incorrectly. Refer to
the section βInserting the Batteries into the Remoteβ.
No signal on an input source
β’ξ It is possible that no device is connected.
β’ξ Check the AV cables and connections from your
device.
β’ξ Check the device is switched on.
The Image is not centered in VGA source
To have your TV automatically center the image, enter
the PC Position menu in Picture menu, highlight
Autoposition OK and press . Wait for it to finish. In
order to set the position of the image manually you
can use and options. Select H Position V Position
the desired option and use Left and Right directional
buttons on the remote to set.
Recording unavailable
To record a programme, you should first correctly
connect a USB storage device to your TV, while the
TV is switched off. You should then switch on the TV to
enable recording feature. If you cannot record, check
the storage device is correctly formatted and there is
sufficient space.
USB is too slow
If a βUSB disk writing speed too slow to recordβ
message is displayed on the screen while starting a
recording, try restarting the recording. If you still get
the same error, it is possible that your USB storage
device does not meet the speed requirements. Try
using a different USB storage device.
PC Input Typical Display Modes
The following table is an illustration of some of the
typical video display modes. Your TV may not support
all resolutions.
Index Resolution Frequency
1640x480 60Hz
2640x480 75Hz
3800x600 56Hz
4800x600 60Hz
5800x600 72Hz
6800x600 75Hz
71024x768 60Hz
81024x768 70Hz
91024x768 75Hz
10 1152x864 75Hz
11 1280x768 60Hz
12 1360x768 60Hz
13 1280x960 60Hz
14 1280x1024 60Hz
15 1280x1024 75Hz
16 1400x1050 60Hz
17 1440x900 60Hz
18 1440x900 75Hz
19 1920x1080 60Hz
AV and HDMI Signal Compatibility
Source Supported Signals Available
Back AV
PAL O
SECAM O
NTSC4.43 O
NTSC3.58 O
YPbPr
480i, 480p 60Hz O
576i, 576p 50Hz O
720p 50Hz,60Hz O
1080i 50Hz,60Hz O
HDMI
480i, 480p 60Hz O
576i, 576p 50Hz O
720p 50Hz,60Hz O
1080i 50Hz,60Hz O
1080p
24Hz, 25Hz,
30Hz, 50Hz,
60Hz
O
(X: Not Available, O: Available)
In some cases a signal on the TV may not be displayed
properly. The problem may be an inconsistency with
standards from the source equipment (DVD, Set-top
box, etc. ). If you do experience such a problem please
contact your dealer and also the manufacturer of the
source equipment.
English - 29 -
does not apply, when the TV is switched into the
standby mode.
The performance of some devices in the market,
may vary due to the software architecture. In order to
use Networked Standby Mode feature with a better
performance, please make sure that your device has
latest firmware version.
If you want your TV to consume less power in standby
mode, you can disable this feature by setting the
Networked Standby Mode Off option as .
Wireless Display
Wireless Display is a standard for streaming video and
sound content. This feature provides the ability to use
your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and TV.
Plug the wireless USB dongle to TV first, if the TV
doesnβt have internal WLAN feature.
Then press the button on the remote and Source
switch to source. Wireless Display
A screen appears stating that the TV is ready for
connection.
Open the sharing application on your mobile device.
These applications are named differently for each
brand, refer to the instruction manual of your mobile
device for detailed information.
Scan for devices. After you select your TV and connect,
the screen of your device will be displayed on your TV.
Note: This feature can be used only if the mobile device
supports this feature. If you experience problems with the
connection check if the operating system version you use
supports this feature. There may be incompatibility problems
with the operating system versions which are released after
the production of this TV. Scanning and connecting processes
differ according to the programme you use.
Connectivity Troubleshooting
Wireless Network Not Available
ξξ Ensure that any firewalls of your network allow the
TV wireless connection.
ξξ ξ·ξξξξξξξξξοξξξξξξξξοξξξξξξξξξξξξξξξξξξξοξξξξξοξξξξξξξ
Network menu screen.
If the wireless network does not function properly, try
using the wired network in your home. Refer to the
Wired Connectivity section for more information on
the process.
ξ¬ξξξξξξξ·ξΉξξξξξξξξξξξξξξξοξξξξξοξξξξξξξξοξξξξξξξξξξξοξξξξ
check the modem (router). If the router does not have a
ξξξξ
ξξξξξξξξξξξξξξξοξξξξξξξξξξξξξξξοξξξξξξξξξξξξξξξξξ
Connection is Slow
ξΆξξξξξξξοξξξξξξξοξξξξ
ξξξξξξξξξξξξξοξξξξξξξξξξξξξξξξ
ξξξξοξξξξξξξοξξξξξξξξξξοξξξξξξξξξξξξοξξξξξξξξξξξξξξξξοξξξ
ξξξξξξξξοξξξξξξξξξοξξξξξξξξξξξξξξξξξοξξξξξξΌξξξξξξξξξξξ
ξξξξξξξξοξξξξξξξξξξξξξξξξοξξξξξξξξξξξξξξξξξξ
Disruption during playback or slow reactions
You could try the following in such a case:
Keep at least three meters distance from microwave
ovens, mobile telephones, bluetooth devices or any
other WLAN compatible devices. Try changing the
active channel on the WLAN router.
ξ¬ξξξξξξξξξ¦ξξξξξξξξξξξ±ξξξξ€ξξξξξξ
ξξξξξξ€ξξοξξξΉοξξξξ
ξΆξξξοξξξξ±ξξξξΊξξξξξξ
ξ¬ξξξξξξξ°ξ€ξ¦ξξξξξξξξξξξξξξοξξξξοξξξξοξοξξξξξξξ
ξξξξξξξξξξξξ
ξ³ξ¦ξξξξξξξξξξξξξξξ
ξξξξξξξξξξξξξξξξξξξοξξξξξξξξοξξοξξ
ξξξξοξ
ξξξξξξξξξξξξξξ·ξΉξξοξξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξξξ
ξ¬ξξ ξξξξξξξ ξξξξξξ ξξξξ ξ°ξ€ξ¦ξξξξξξξξξ οξξ ξξξξξξξοξξξξξξ
ξξξξξξοξξξξξξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξξξξ·ξοξξοξξξξ
ξξξξξξξοξξξξξξοξξξξξξξξξξξξοξξξξξξξξξξξξξΆοξξξξξξξξξ
ξ·ξΉξξξξξ οξξξξξξξξ°ξ€ξ¦ξξξξξξξξξξ ξξξξξοξξξξξξξξξξξξοξξξ
ξξξξοξξξξξξξξξξξξξξοξξξξξξξξξξ°ξ€ξ¦ξξξξξξξξξξξξξξξξξξ·ξΉξξξ
ξ©ξξξξξοξξξξξξξξξξξξξξξξ·ξΉξξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξξξ
ξ¦ξξξξξξξ ξξξξξ οξξξξξξξξ ξξξξοξξξ ξξξξοξξξξ ξξξξ ξξξξξξξξ
οξξξξξξξοξξξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξξξξξοξξξξξξξξξ
ξξξξξξξξξ·ξΉξξξξξξξξξοξξξξξξξξ
ξ¬ξξ οξξ ξξξξξ ξξξξοξ
ξξξ ξξξξξ ξξξξ ξξξξξξξοξξξ ξξξξ ξξξξ ξ
ξξ
ξξξοξξξ
ξξξξξξξ ξξξξξξοξξξξξξξξξξξ
ξξξξξ ξ¬ξξ ξξξξξξοξξξξξοξξ
ξξξξξξξ ξξξξξ ξξξξ
ξξξξξ ξξξξξξξξ ξξξξξ οξξξξξξξξ ξξξξοξξξ
ξξξξοξξξξξξ€ξξοξξξξξξξξοξξξξξ
ξξξξξξξξξξξξξξξξξξξξξξξξξοξοξξξ
ξξξξ ξοξξξξξξξξξξξξ
ξξξξ ξξοξξξξξοξξξ ξξξξξ·ξΉξοξξξ€ξξοξξ
ξΉοξξξξξΆξξξοξξξξξξξξξξξξξοξξξξ
ξξξξοξξξξοξξξ€ξξοξξξΉοξξξξ
ξΆξξξοξξξξξξξξξξξ
Invalid Domain
ξ¨ξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξ³ξ¦ξξοξξξ
ξξξξξξξξξοξξξξ ξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξ
ξξξξξξξξξξξξξξοξξοξξξξξοξξξξξξοξξξξξξξξξξοξξξξξξξξοξξξξοξξ
ξξξξξξξξοξξξξξξξξξξξξξξξξξξξξξξξξξξ³ξ¦ξξξ¬ξξξξξξξξξξοξξ
οξξοξξξξοξξξξξοξξξοξξξξξξξξξξξξξξ
ξξξξξξξοξξξξ
ξξξξοξξξ
ξοξξξξοξξξ€ξξοξξξΉοξξξξξΆξξξοξξξξξξξξξ
Using Audio Video Sharing Network Service
ξ€ξξοξξ ξΉοξξξξ ξΆξξξοξξξ ξξξξξξξξ ξξξξξ ξξ ξξξξξξξξξ ξξξξξ
ξξξξξξξξξξξοξξοξξξξξξξξξξξξξξξοξοξξξξξξξξξξξξοξξξξξξξ
ξξξξξξ ξξξξξ ξξξξξ ξξξξξξοξξξξ ξξξ ξξξξ ξξξ ξξ ξξξξξ
network.
ξ·ξοξξ ξξξξξξξξξ ξξξξξξξ ξξξξ ξξξ ξοξξξ ξξξξ ξξξξξ ξξξξξξξξ
ξξξοξξξξξξξοξξξξξξξξξξξξοξξξξξξξξξοξξξξξξξξξξξξξξξξξξξ
to your home network.
1. Server Software Installation
ξ·ξξξξ€ξξοξξξΉοξξξξξΆξξξοξξξξξξξξξξξξξξξξξξξ
ξξξξξξξξξξξξξξ
ξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξ³ξ¦ξξξξοξξ
ξξξξξξξξοξξξξξξξοξξξξξξξξξξξξξξξξξξοξξξξξξοξξξξξξξξξξξξξξ
ξξξξξξξξξξοξξξξξξοξξξξξ³ξξξξξξξξξξξξξ³ξ¦ξξξξξξξξξξξξξξξ
server programme.
Product specificaties
Merk: | Vox |
Categorie: | Televisie |
Model: | 43DSW550B |
Heb je hulp nodig?
Als je hulp nodig hebt met Vox 43DSW550B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Televisie Vox
20 Oktober 2024
2 Augustus 2024
16 December 2023
16 December 2023
16 December 2023
16 November 2023
8 Juli 2023
5 Juli 2023
5 Juli 2023
5 Juli 2023
Handleiding Televisie
- Televisie Electrolux
- Televisie Philips
- Televisie Sony
- Televisie Samsung
- Televisie Xiaomi
- Televisie Casio
- Televisie Panasonic
- Televisie LG
- Televisie AEG
- Televisie BEKO
- Televisie Daewoo
- Televisie Grundig
- Televisie JVC
- Televisie Medion
- Televisie Nokia
- Televisie Pioneer
- Televisie Siemens
- Televisie Toshiba
- Televisie Xiron
- Televisie Yamaha
- Televisie Abus
- Televisie Acer
- Televisie Ag Neovo
- Televisie Airis
- Televisie Aiwa
- Televisie Akai
- Televisie Albrecht
- Televisie Alden
- Televisie Aldi
- Televisie Allview
- Televisie Alphatronics
- Televisie AOC
- Televisie Apex
- Televisie Arcelik
- Televisie Aristona
- Televisie Audiosonic
- Televisie Avtex
- Televisie Belson
- Televisie BenQ
- Televisie Blaupunkt
- Televisie Bluesky
- Televisie Brandt
- Televisie Daitsu
- Televisie Dell
- Televisie Denver
- Televisie Difrnce
- Televisie Digihome
- Televisie Dual
- Televisie Durabase
- Televisie Dyon
- Televisie E-motion
- Televisie Emerson
- Televisie Energy Sistem
- Televisie Engel
- Televisie Fantec
- Televisie Ferguson
- Televisie Finlux
- Televisie Fujitsu
- Televisie Funai
- Televisie GPX
- Televisie Graetz
- Televisie Haier
- Televisie Hannspree
- Televisie Hisense
- Televisie Hitachi
- Televisie HKC
- Televisie Hoher
- Televisie Horizon
- Televisie Humax
- Televisie Hyundai
- Televisie Icy Box
- Televisie Iiyama
- Televisie ILive
- Televisie Innoliving
- Televisie Insignia
- Televisie Intenso
- Televisie ITT
- Televisie Kogan
- Televisie Kuppersbusch
- Televisie Lenco
- Televisie Lenovo
- Televisie Lexibook
- Televisie Loewe
- Televisie Logik
- Televisie Luxor
- Televisie Magnavox
- Televisie Magnum
- Televisie Manhattan
- Televisie Manta
- Televisie Marantz
- Televisie Marquant
- Televisie Megasat
- Televisie Metz
- Televisie Mitsubishi
- Televisie Mpman
- Televisie MT Logic
- Televisie Muse
- Televisie Mx Onda
- Televisie Nabo
- Televisie Nec
- Televisie Nedis
- Televisie Newstar
- Televisie Nextbase
- Televisie Nikkei
- Televisie Nordmende
- Televisie Packard Bell
- Televisie Peaq
- Televisie Philco
- Televisie Polar
- Televisie Polaroid
- Televisie Premier
- Televisie Proline
- Televisie Pyle
- Televisie Qilive
- Televisie RCA
- Televisie Reflex
- Televisie Reflexion
- Televisie Rm 2000
- Televisie Roadstar
- Televisie Saba
- Televisie Sagem
- Televisie Salora
- Televisie Sanyo
- Televisie Sbr
- Televisie Schaub Lorenz
- Televisie Schneider
- Televisie Seg
- Televisie Selfsat
- Televisie Sencor
- Televisie Sharp
- Televisie Silvercrest
- Televisie Sogo
- Televisie Soundmaster
- Televisie Strong
- Televisie Sunny
- Televisie Sunstech
- Televisie Superior
- Televisie Sweex
- Televisie Sylvania
- Televisie TCL
- Televisie Teac
- Televisie TechLine
- Televisie Technika
- Televisie Technisat
- Televisie Techwood
- Televisie Tele 2
- Televisie Teleco
- Televisie Telefunken
- Televisie Terris
- Televisie Tesla
- Televisie Tevion
- Televisie Thomson
- Televisie Tve
- Televisie Uniden
- Televisie United
- Televisie Vestel
- Televisie Viewpia
- Televisie Viewsonic
- Televisie Vision Plus
- Televisie Vivax
- Televisie Vivo
- Televisie Vizio
- Televisie Voxx
- Televisie Walker
- Televisie Westinghouse
- Televisie Wharfedale
- Televisie Woxter
- Televisie Xoro
- Televisie Yasin
- Televisie Zalman
- Televisie Ziggo
- Televisie Jay-tech
- Televisie Jensen
- Televisie JGC
- Televisie JTC
- Televisie Odys
- Televisie OK
- Televisie Oki
- Televisie Online
- Televisie Onn
- Televisie Opera
- Televisie Oppo
- Televisie Optoma
- Televisie Orion
- Televisie Oyster
- Televisie Changhong
- Televisie Clatronic
- Televisie Continental Edison
- Televisie ECG
- Televisie Palsonic
- Televisie Bang And Olufsen
- Televisie GoGEN
- Televisie KrΓΌger And Matz
- Televisie Naxa
- Televisie Proscan
- Televisie Voxicon
- Televisie Kunft
- Televisie Aspes
- Televisie AYA
- Televisie Bush
- Televisie High One
- Televisie Infiniton
- Televisie Kernau
- Televisie Nevir
- Televisie Orima
- Televisie Svan
- Televisie Grunkel
- Televisie SereneLife
- Televisie Zenith
- Televisie Citizen
- Televisie Kubo
- Televisie Smart Brand
- Televisie Alba
- Televisie Edenwood
- Televisie Elbe
- Televisie Majestic
- Televisie Trevi
- Televisie Cello
- Televisie NPG
- Televisie Orava
- Televisie Star-Light
- Televisie Videocon
- Televisie Cecotec
- Televisie Bauhn
- Televisie MBM
- Televisie Furrion
- Televisie Coby
- Televisie Doffler
- Televisie DGM
- Televisie Planar
- Televisie Chiq
- Televisie Monster
- Televisie Antarion
- Televisie Felson
- Televisie SEIKI
- Televisie SunBriteTV
- Televisie Tucson
- Televisie CGV
- Televisie LTC
- Televisie Caratec
- Televisie SΓ©ura
- Televisie AudioAffairs
- Televisie Element
- Televisie Peerless-AV
- Televisie XD Enjoy
- Televisie Inovia
- Televisie DirecTV
- Televisie Telesystem
- Televisie Kemo
- Televisie EKO
- Televisie Mitsai
- Televisie V7
- Televisie ISymphony
- Televisie Pantel
- Televisie ATYME
- Televisie HCI
- Televisie Inno-Hit
- Televisie Lin
- Televisie Elements
- Televisie Englaon
- Televisie Astar
- Televisie Visco
- Televisie Tivax
- Televisie H&B
- Televisie Norcent
- Televisie TELE System
- Televisie TIM
- Televisie Kivi
- Televisie Mach Power
- Televisie Axing
- Televisie FFalcon
- Televisie Smart Tech
- Televisie Mitzu
- Televisie JTC24
- Televisie Coocaa
- Televisie SYLVOX
- Televisie RevolutionHD
- Televisie FOX Electronics
- Televisie QBell Technology
- Televisie Aconatic
- Televisie Mitchell & Brown
- Televisie Mystery
Nieuwste handleidingen voor Televisie
19 December 2024
1 November 2024
28 September 2024
1 November 2024
1 November 2024
28 September 2024
25 Oktober 2024
9 Januari 2025
8 Januari 2025
7 Januari 2025