Vonyx CVB212 Handleiding

Vonyx Speaker CVB212

Lees hieronder de 📖 handleiding in het Nederlandse voor Vonyx CVB212 (16 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

CVB Series Active Speaker

Ref. nr.: 178.490; 178.492; 178.493; 178.495

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.1

ENGLISH

Congratulations to the purch e of this Von product. Please read this manual thoroughly prior to using the product in order to as yx

benet fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all pre utions ca

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When th product is switched on for the rst e

time, some smell may occur. This is normal and will

disappear after a while.

- The product contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the product on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be car ul with the mains lead and do not damage it. A ef

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the product with wet han . ds

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the product into a mains

outlet and DO NOT switch the unit on. C tact your on

dealer. Do NOT connect the product to a rheostat or

dimmer.

- To avoid re and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the product to an earthed main outlet (220-s

240Vac/50Hz) protected by a 10- fuse. 16A

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used f a longer period of or

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the structions. in

- Do not repeatedly switch the produ on and o. This ct

shortens the life time.

- Keep the product out of the reach of children. Do not

leave the product unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his product is with speaker inside which can cause If t

magnetic eld. Keep the product at least 60cm away

from computer or TV.

- If this p duct have a built-in lead-acid rechargeable ro

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace th same wi

specications battery. And dispose the damaged battery

environment friendly.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unp gging it from the lu

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains volta is 220-240Vac/50Hz. Check if power ge

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions.

This mark attrac the attention of the user to high voltages that are present inside the housing and that are of sucient ts

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and th p2-he should at

read and adhere to.

The product s been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate ha

and their guarantee!

NOTE: To make sure that the product will function normally, it must be ed in rooms with a temperature between 5°C/ °us 41 F and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are pical. The actual values can slightly change from one unit to the other. ty

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the pr t. This would also oduc

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains

voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The product must also

be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or re.

CONTROLS AND CONNECTIONS

1. Display

The display shows multiple forms of information, for example current

MODE, elapsed time, etc.

2. Button Cluster

M - ode Press to change mode.

Previous Track - Skip to previous track.

Play / Pause - Start/resume or pause play by pressing this button.

N - ext Skip to next track.

Repeat - Press to select repeat single track or repeat full folder.

Mute/Stand-by - Press to mute the device. Hold to enter stand-by mode.

3. SD Card Slot

Insert an SD card in this slot.

4. Port USB

USB entry port.

5. Mic Output Level Control

Adjust the volume of cropho channel.the mi ne

6. Mic Echo Level Control

Adjust the echo level.

7. Treble Control

H tone control. igh

8. Bass

L tone control.ow

9. Master Volume

Adjust the overall output level of the sound set.

10. XLR Microphone Input

XLR input for connecting a microphone.

11. Jack Microphone Input

6.3mm ¼” input jack for connecting a microphone.

12. Line Inputs

RCA input for connecting audio units with line level output

(e.g. mixer, CD player).

13. Line Outputs

RCA output for connecting another active speaker unit.

14. Power Switch

Switch to turn e devi O or OFF. th ce N

15. AC In And Fuse Holder

Socket for plugging in the supplied power cord.

CONNECTING WITH BT-DEVICE

1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the

music. See the operating instruction that devi for instructions. s of ce

2. -function. Press the “MODE” button and activate BT

3. Select on your BT-device and make the -connection “ ”VONYX BT

If password is required, you can enter "0000".

Attention: The BT distance is approx. 10meter without any barrier.

Product specificaties

Merk:	Vonyx
Categorie:	Speaker
Model:	CVB212
Kleur van het product:	Zwart
Gewicht:	17500 g
Breedte:	400 mm
Diepte:	375 mm
Hoogte:	960 mm
Gemiddeld vermogen:	1200 W
Draaghandvat:	Ja
Aantal per verpakking:	- stuk(s)
Geschikt voor buitengebruik:	Nee
Speaker plaatsing:	Vloer
Gevoeligheid:	113 dB
Bass reflex:	Ja
Luidspreker soort:	2-weg
Diameter woofer:	12 "
Diameter hogetonenluidspreker:	2.5 "
Ingebouwde versterker:	Ja