Vonyx AP215ABT Handleiding

Vonyx Speaker AP215ABT

Lees hieronder de 📖 handleiding in het Nederlandse voor Vonyx AP215ABT (16 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

AP215ABT Active Speaker

Ref. nr.: 0.349 17

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V2.1

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to

beneﬁt fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid ﬁre and/or electrical shock. Repairs must only be carried out by a qualiﬁed technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the product is switched on for the ﬁrst

time, some smell may occur. This is normal and will

disappear after a while.

- The product contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the product on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the product with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualiﬁed technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the product into a mains

outlet and DO NOT switch the unit on. Contact your

dealer. Do NOT connect the product to a rheostat or

dimmer.

- To avoid ﬁre and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualiﬁed technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the product on and oﬀ. This

shortens the life time.

- Keep the product out of the reach of children. Do not

leave the product unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his product is with speaker inside which can cause If t

magnetic ﬁeld. Keep the product at least 60cm away

from computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

speciﬁcations battery. And dispose the damaged battery

environment friendly.

- If the product has fallen, always have it checked by a

qualiﬁed technician before you switch the oduct on pr

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product oﬀ prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of suﬃcient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The product has been certiﬁed CE. It is prohibited to make any changes to the product. They would invalidate the CE certiﬁcate

and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The speciﬁcations are typical. The actual values can slightly change from one unit to the other.

Speciﬁcations can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature ﬂuctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched oﬀ until it has reached room temperature.

POWERSUPP LY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains

voltage corresponds to this, all other voltages than speciﬁed, the light eﬀect can be irreparably damaged. The product must also

be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or ﬁre.

REAR PANEL

1. Media Player

Play music from an SD or USB

memory device.

2. Microphone Level

Adjust the signal level of

microphone.

3. Microphone Input

6.3mm ¼” input jack for

connecting a microphone.

4. Microphone Input

XLR input jack for connecting a

microphone.

5. Line Level

Adjust the signal level of line

input.

6. Line Input

RCA jack input for connecting

audio units with line level output

(e.g. mixer, CD player)

7. XLR Line Input

XLR jack input for connecting

audio units with line level output

(e.g. mixer, CD player)

8. MP3 Level

Adjust the level of media player.

9. Aux Input

3.5mm jack input for connecting audio units with line level output (e.g. mobile phone, CD player)

10. Line Output

XLR output jack for connecting an extra active speaker or audio unit with line level input.

11. Equalizer

5-band equalizer for the master signal. Adjust frequencies are 100Hz, 0Hz, 1kHz, 4kHz, 10kHz. 40

12. Master Volume

Adjust the overall output level of the portable sound set.

13. Power Indicator

Indicator lights up when power turned on.

14. Clip Indicator

Indicator lights up when signal level is too high. When the LED light up continually you must reduce the volume to

protect the speaker.

CONNECT DEVICE BT

1. Set the search function on of the BT device you want to play the music. See the operating

instructions for that device..

2. -function of media player. Press the “MODE” button and activate BT

3. Find on your BT- device “VONYX” and make the connection

If password is required, you can enter "0000".

Product specificaties

Merk:	Vonyx
Categorie:	Speaker
Model:	AP215ABT
Kleur van het product:	Zwart
Gewicht:	28300 g
Breedte:	420 mm
Diepte:	360 mm
Hoogte:	1110 mm
Bluetooth:	Ja
Type stroombron:	AC
Gemiddeld vermogen:	600 W
Draaghandvat:	Ja
Aantal per verpakking:	1 stuk(s)
Aantal:	1
Peak Music Power Output (PMPO):	1200 W
Frequentiebereik:	30 - 20000 Hz
Diameter woofer:	15 "
Aantal USB 2.0 Type-A-poorten:	1
Ingebouwde versterker:	Ja
Ingebouwde crossover:	Ja