Vivotek AM-412 Handleiding

Vivotek Bewakingscamera AM-412

Lees hieronder de 📖 handleiding in het Nederlandse voor Vivotek AM-412 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Revision History:

Rev. 1.0: Initial release. Rev. 1.1: Added mounting holes for IB8367A, IB8369A, IB8377, and IB8379

Rev. 1.2: Added IB9387, MS8391-EV, MS9390-HV, and IB9389 as the supported models. Rev.1.3: Added supported

models

VIVOTEK Mounting Accessories

AM-412 Corner mount

Installation Guide

Mechanical DrawingsII

Installation

III

Compatible VIVOTEK CamerasI

AM-412 Corner mount bracket

170

315,25

4- 6

4- 7

102

56,29

48,75

3- 4,5

175

215,71

144,17

M8X20mm

SUS 302

Below is a general, sample procedure using a Corner mount bracket:

1. Combine the two metal pieces together using the M8 hex nuts and washers.

2. Align the assembled brackets with the desired position. Align screw holes on the brackets against the wall. Drill

holes on the wall for securing the bracket and for routing the cables. Hammer the anchors into the wall. Note

that these screws and wall anchors are user-supplied.

Corresponding ordering part numbers:

AM-412: 900034902G AM-719: 100184500G

AM-218: 100146100G

Compatible

accessories

Supported Cameras

AM-719 IB836BA-EHF3/EHT/HF3/HT, IB8382-EF3/ET/F3/T, IB9371-EHT/HT, IB9381-EHT/HT,

IB9365-EHT/HT, IB9367-EHT/HT/EH/H, IB8377-EHT/HT, IB9391-EHT, IB9387-EHT/

HT/EH/H, MS8391-EV.

AM-218 (via AM-719) Please refer to AM-218, AM-520, and AM-525 documents.

Directly attached Supported Cameras

* IB836BA-EHF3/EHT/HF3/HT, IB8382-EF3/ET/F3/T, IB9371-EHT/HT, IB9381-EHT/HT,

IB9365-EHT/HT, IB9367-EHT/HT/EH/H, IB8377-EHT/HT, IB9391-EHT, IB9387-EHT/

HT/EH/H, MS8391-EV, MS9390-HV, IB9367-EHT-v2

IB8367A, IB8369A, IB8377-H, IB8379-H, IB9389 series

* The directly-attached conguration is less recommended for the lack of waterproof and cabling

protection. If directly attached, you should properly wrap the rear-end cables and connectors with

waterproof protection such as putties.

Package Contents

Items 1. Corner mount bracket, 2. M6X20mm screws x4. 3. M5X20mm screws x4, 4. Hex L

wrench 5mm x1, 5. Hex L wrench 4mm x1, 6. M8 nut x2. 7. M4x15 screws x4

M6X20 X4

M4X15 X4

5mm X1

M5X20 X4

4mm X1

M8 X2

Bullet camera

AM-719

AM-412

AM-218

Dome camera

AM-520 / AM-525, etc.

AM-412

AM-719

AM-412 Applications

3. The 4 screw holes in the center are used for directly mounting the IB series bullet cameras.

The 4 screw holes at the edges are used for mounting the AM-719 conduit box.

For M6 socket screws

- for IB series bullet cameras

directly attached

Also applies to MS9390 using

the M4 screws

For M5 socket screws

- for AM-719 conduit box

4. Secure the AM-719 conduit box to bracket using the M5 screws, washers, and hex heads. A hex crescent

wrench is required.

5. For the rest of the installation procedure, refer to the documentation that came with the AM-719, AM-218, and

the other accessories.

Rev. 1.3

The 3 screw holes in the center are used for mounting

the IB8367A, IB8369A, IB8377-H, IB8379-H, and IB9389

bullet cameras.

For M4 screws

- for IB8367A, IB8369A

IB8377-H, IB8379-H,

and IB9389 series. The 3/4" cable glands and conduts for protecting cables are user-supplied.

If you are installing a bullet camera directly to the bracket, use the M6 screws in the center. A hex crescent

wrench is required.

The installation of IB8367A, IB8369A, IB8377, IB8379, and IB9389 is similar to the above, except using

different mounting holes and screws.

Below are the corresponding mount holes for the MS9390-HV.

For the IB9367-EHT-v2, secure the adapter plate to the bracket using M6 x 20 socket screws. Tighten the hex

nuts to secure from the other side.

T20 anti-tamper

M4 x 18

Product specificaties

Merk:	Vivotek
Categorie:	Bewakingscamera
Model:	AM-412
Soort:	Support
Ondersteuning voor plaatsing:	Universeel
Connectiviteitstechnologie:	Bedraad
Maximale gewichtscapaciteit:	- kg
Compatibiliteit:	IB836B-EHF3, IB836B-EHT, IB836B-HF3, IB836B-HT, IB8382-EF3, IB8382-ET, IB8382-F3, IB8382-T, IB9371-EHT, IB9371-HRT, IB9371-HT, IB9381-EHT, IB9381-HRT, IB9381-HT, MS8391