Vivitek DU6693Z Handleiding

Vivitek Beamer DU6693Z

Lees hieronder de 📖 handleiding in het Nederlandse voor Vivitek DU6693Z (11 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Ultra Short Throw Lens – Installation Guide

Table of Content

Important Notice ................................................................................................................................ 2

Packing Check List ............................................................................................................................ 2

Projection Lens Overview ................................................................................................................. 3

Installing the Projection Lens ........................................................................................................... 4

Projection Distance and Size ............................................................................................................ 9

Projection Lens Specifications ....................................................................................................... 10

Projection Lens Dimensions ........................................................................................................... 10

About the VIVITEK Support ............................................................................................................ 11

Ultra Short Throw Lens – Installation Guide

Important Notice

Before using the Ultra Short Lens, make sure to read below important notice.

 Be sure to turn the power off and disconnect the power cable from the wall outlet before replacing the Lens. Improper

operation may cause to electrical shock or injury to eyes by intense light from the projector.

 Please remove the lens cap before installing the lens to the projector, the projection light may heat the lens cap and

melt it, this may raise safety issue or damage the projector.

 Make sure the projective film on the Lens is removed before turning on the projector; the protective film may be melt

during projection then resulting in damage or deformation.

 Do not place any object near the projection light path, the intense light from the projection lens may result in fire or burn

injures.

 Use a clean, soft and dry cloth or Lens cleaning wipes to wipe away dirt or dust adhered on the lens.

 Do not use the cloth containing oil, dust or water for cleaning. Once dust and dirt adhered on the lens surface, please

clean the glass with lens cleaning wipe.

 Keep all the original packing material even you finish the installation, the packing material may be used for avoiding

damage during transportation.

Packing Check List

Item Part Description Qty.

Ultra short throw with adaptor bracket

Bracket assembly

This bracket assembly is composed by one base bracket and four

arms, it’s is a part of support kit for joining Ultra Short Throw Lens

and the projector. Use flat screw to fix the bracket assembly on

the bottom of the projector and joint the arm with projection lens

by hex socket cap screw.

Flat screw 4*0.7*20mm:

The screws are used for fixing bracket assembly to the bottom of

the projector

Hex socket cap screw, 6*1*14 mm

Hex socket cap screws are used for jointing the arm of bracket

assembly and the projection lens.

Wrench

The wrench is used to drive hex socket cap screw

Ultra Short Throw Lens – Installation Guide

Projection Lens Overview

Note

 There is one lens cap to cover the lens cap, please remove the lens cap before installing the lens to the projector. The

projected light may heat the lens cap and melt it; it may raise safety issue or damage the projector.

 One protective film is attached on projection light outlet for avoiding scratch or dust on this protection surface, please

remove the protective film before tuning on the projector. Improper operation may cause to the projective film.

Projection light outlet Mounting bracket

(Screw holes x 2, Guide Pin x 2)

Motor for Focus Adjustment

Motor for Focus Plane Adjustment

Lens Surface

Product specificaties

Merk:	Vivitek
Categorie:	Beamer
Model:	DU6693Z
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	27000 g
Breedte:	500 mm
Diepte:	580 mm
Hoogte:	205 mm
Geluidsniveau:	32 dB
Gebruikershandleiding:	Ja
Stroombron:	AC
Plaatsing:	Desktop
Oorspronkelijke beeldverhouding:	16:10
Ethernet LAN:	Ja
Ondersteunde video-modi:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Meegeleverde kabels:	AC, VGA
Geïntegreerde geheugenkaartlezer:	Nee
Typische contrastverhouding:	10000:1
Projector helderheid:	7000 ANSI lumens
Projectietechnologie:	DLP
Projector native resolution:	WUXGA (1920x1200)
Keystone correctie, verticaal:	+/-40 °
Keystone correctie, horizontaal:	+/-60 °
Geschikt voor schermmaten:	- "
Projectie-afstand objectief:	- m
Matrix grootte:	0.67 "
Aantal USB 2.0-poorten:	1
VGA (D-Sub)poort(en):	2
Aantal HDMI-poorten:	1
Soort serieële aansluiting:	RS-232
Componentingang video (YPbPr/YCbCr):	5
DVI-poort:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Focus:	Auto
Zoom type:	Auto
Brandpuntbereik:	- mm
Levensduur van de lichtbron:	20000 uur
Type lichtbron:	Laser
Ingebouwde luidsprekers:	Nee
Stroomverbruik (in standby):	0.5 W
Formaat analoog signaal:	NTSC, PAL, SECAM
Volledige HD:	Ja
Verbruik (modus Economisch):	675 W
3D:	Ja
Aantal DisplayPorts:	1
Temperatuur bij opslag:	-10 - 60 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Matrix type:	DMD
Horizontale lens verplaatsingsbereik:	-14 - 24 procent
Verticale lens verplaatsingsbereik:	-33 - 64 procent
Afstandsbediening inbegrepen:	Ja
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Stroomverbruik (typisch):	850 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent
Batterijen inbegrepen:	Ja
Type product:	Projector voor grote zalen