Viking PIDP515RSS Handleiding

Viking Koelkast PIDP515RSS

Lees hieronder de 📖 handleiding in het Nederlandse voor Viking PIDP515RSS (1 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Gasket
Accessory
Door Panel
Cover
Machine
Screw
Use Upper
Hole at the
Top
Use Lower
Hole at the
Bottom
Hole Plug
ACCESSORY DOOR PANEL
The ice machine is supplied without a finished door panel. Accessory door panels are
offered or a custom panel may be used.
Accessory Door Panel Attachment
Note: If door swing is to be changed, it must be done before panel is attached (See
Installation Instructions).
To attach a door panel:
The panel will be held on by 6 screws and 2 machine screws (supplied).
1. Remove the gasket and retain for later use.
2. If the door panel is stainless steel, remove any plastic covering the stainless steel
panel.
3. Place the panel onto the outside of the door, and secure it to the door using two
machine screws, located at the left center and right center (behind door gasket).
4. Fasten the panel to the door using the 6 screws (supplied in kit). In the hinge area, use the outermost screw holes.
5. Place the covers over the hinge areas, and secure each cover to the door using a screw (supplied).
6. Insert hole plug over screw installed in step 5 (supplied).
7. Return the gasket to its original position.
Hole
plug
Cover
Gasket
F20759A EN (120610)
ACCESSORY DOOR PANEL ATTACHMENT
ICE MACHINE ACCESSORY DOOR PANEL INSTALLATION


Product specificaties

Merk: Viking
Categorie: Koelkast
Model: PIDP515RSS

Heb je hulp nodig?

Als je hulp nodig hebt met Viking PIDP515RSS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast Viking

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast