Tunturi Classic 3.0 Handleiding

Tunturi Hometrainer Classic 3.0

Lees hieronder de 📖 handleiding in het Nederlandse voor Tunturi Classic 3.0 (62 pagina's) in de categorie Hometrainer. Deze handleiding was nuttig voor 118 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/62

O W N E R ’ S M A N U A L

OWNER’S MANUAL 2 - 8

BETRIEBSANLEITUNG 9 - 14

MODE D’EMPLOI 15 - 23

HANDLEIDING 24 - 30

MANUALE D’USO 31 - 37

MANUAL DEL USUARIO 38 - 44

BRUKSANVISNING 45 - 51

KÄYTTÖOHJE 52 - 58

Serial number

Seriennummer

Numero de serie

Serienummer

Numero di serie

Nòmero de serie

Seriennummer

Sarjanumero

Bike 3.0_manual_120911.indd 1 9/12/2012 1:44:37 PM

ASSEMBLY 2

ADJUSTMENTS 4

EXERCISING 4

HEART RATE 5

CONSOLE 6

MAINTENANCE 7

MALFUNCTIONS 8

TRANSPORT AND STORAGE 8

TECHNICAL SPECIFICATIONS 8

Your choice shows that you really want to invest in your

well being and condition; it also shows you really value

high quality and style. With Tunturi Fitness Equipment,

you’ve chosen a high quality, safe and motivating

product as your training partner. Whatever your goal in

training, we are certain this is the training equipment to

get you there. You’ll nd information about using your

exercise equipment and what makes for efcient training

at Tunturi’s website at WWW.TUNTURI.COM.

Read this guide through carefully before assembling,

using or servicing your tness equipment. Please keep the

guide somewhere safe; it will provide you now and in the

future with the information you need to use and maintain

your equipment. Always follow these instructions with care.

• Before you start any training, consult a physician to

check your state of health.

• If you experience nausea, dizziness or other abnormal

symptoms while exercising, stop your workout at once

and consult a physician.

• To avoid muscular pain and strain, begin each

workout by warming up and end it by cooling down

(slow pedaling at low resistance). Don’t forget to

stretch at the end of the workout.

• The equipment is not to be used outdoors.

• Place the equipment on a rm, level surface. Place

the equipment on a protective base to avoid any

damages to the oor beneath the equipment.

• Make sure that the exercising environment has

adequate ventilation. To avoid catching cold, do not

exercise in a draughty place.

• In training, the equipment tolerates an environment

measuring +10°C to +35°C. The equipment can

be stored in temperatures ranging between -15°C

and +40°C. Air humidity in the training or storage

environment must never exceed 90%.

• If children are allowed to use the equipment,

they should be supervised and taught to use the

equipment properly, keeping in mind the child’s

physical and mental development and their

personality.

• Before you start using the equipment, make sure that

it functions correctly in every way. Do not use faulty

equipment.

• Press the keys with the tip of the nger; your nails may

damage the key membrane.

• Never lean on the interface.

• Never remove the side covers. Do not step on the

frame casing.

• Only one person may use the equipment at a time.

• Hold the stationary handlebar for support when

getting on or off the equipment.

• Wear appropriate clothing and shoes when

exercising.

•

Protect the meter from sunlight and always dry the

surface of the meter if there are any drops of sweat

on it.

• Further information on warranty terms can be found

in the warranty booklet included with the product.

• Please note that the warranty does not cover

damage due to shipping or negligence of

adjustment or maintenance instructions described in

this manual.

• The equipment must not be used by persons weighing

over 135 kg.

• Make sure the equipment is unplugged before

carrying out any assembly or maintenance

procedures.

• Do not attempt any servicing or adjustments other

than those described in this guide. Everything

else must be left to someone familiar with the

maintenance of electromechanical equipment and

authorized under the laws of the country in question

to carry out maintenance and repair work.

SAVE THIS INSTRUCTION MANUAL

Start by unpacking the equipment and check that you

have the following parts:

1. Frame

2. Rear and front support

3. Pedals (2 pcs)

4. Handlebar

5. Console

6. Transformer

7. Assembly kit (contents marked with * in the spare part

list): keep the assembly tools, as you may need them

e.g. for adjusting the equipment.

If necessary, please contact your dealer with the model,

equipment serial no. and spare part no. of the missing

part. You’ll nd a spare part list at the back of this guide.

The packaging includes a silicon bag for absorbing

moisture during storage and transportation. Please dispose

of the bag once you have unpacked the equipment. The

directions left, right, front and back are dened as seen

from the exercising position. We recommend that the

equipment is installed by two adults.

Bike 3.0_manual_120911.indd 2 9/12/2012 1:44:38 PM

Bike 3.0 - OWNER’S MANUAL

By holding on to the seat, incline the equipment backwards

so that it rests on its transportation wheels. Attach the rear

support from below with four hexagonal socket head

screws and washers. Attach the front support to the frame

with four screws and washers. Restore the equipment to its

upward position so that it rests on the support feet.

The pedals are distinguished by the markings R (= right)

and L (= left) on their shafts. Fasten the right pedal to the

right pedal crank turning clockwise and the left pedal to

the left pedal crank turning counterclockwise. Fasten the

pedal bands rst into the retainer at the device. Thread

the band through the pedal loop and push the band

opening into the projection in the pedal. Fasten the pedal

bands to the pedal outside. Push the band through the

locking buckle and the band locks automatically. The

length of the band can be adjusted with the locking

buckle.

Attach the cable coming from the frame tube to the

connector at the bottom of the handlebar. Ensure that

the joint is securely locked by gently pulling the wire.

Thread the wire carefully inside the frame tube and push

the handlebar support tube into place inside the frame

tube so that the fastening screws are on the front of the

tube.

NOTE! Use the enclosed Allen key to tighten both

fastening screws through the holes in the tube. Tighten the

fastening screws by turning them counter-clockwise.

Bike 3.0_manual_120911.indd 3 9/12/2012 1:44:39 PM

Product specificaties

Merk:	Tunturi
Categorie:	Hometrainer
Model:	Classic 3.0

Heb je hulp nodig?

Als je hulp nodig hebt met Tunturi Classic 3.0 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Hometrainer Tunturi

Tunturi F20R Recumbent Bike Handleiding

11 Oktober 2023

Tunturi HG80 Home Gym Handleiding

11 Oktober 2023

Tunturi Cardio Fit Cross C30 Handleiding

11 Oktober 2023

Tunturi Cardio Fit bike B15 Handleiding

11 Oktober 2023

Tunturi E-80R Recumbent Bike Handleiding

11 Oktober 2023

Tunturi HG60 Home Gym Handleiding

11 Oktober 2023

Tunturi Cardio Fit Bike 30 Handleiding

11 Oktober 2023

Tunturi Cardio Fit Row R30 Handleiding

11 Oktober 2023

Tunturi 18TCFDC000 Console Handleiding

11 Oktober 2023

Tunturi HG20 Home Gym Handleiding

11 Oktober 2023

Handleiding Hometrainer

Nieuwste handleidingen voor Hometrainer

Reebok R7.90 Treadmill Handleiding

7 September 2024

Taurus Racer Pro Handleiding

20 November 2024

Wahoo Kickr 18 Handleiding

15 November 2024

Taurus Air Bke Handleiding

2 November 2024

Cardiostrong IB50 Handleiding

2 November 2024

Gymrex GR-MG126 Handleiding

16 Oktober 2024

Skandika Vinneren E 590 Handleiding

7 Oktober 2024

Skandika Foldaway X-2000 Handleiding

7 Oktober 2024

Christopeit ET 3.1 Handleiding

30 September 2024

Horizon Comfort 4.0 Handleiding

24 September 2024