TP Link Tapo C501 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link Tapo C501 (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Outdoor Pan/Tilt 4G LTE Camera
4. Set Up
Quick Start Guide
*Images may dier from actual products.7106511291 REV1.0.0
1. Download App
Download the app from the Tapo
App Store or Google Play, and log in.
01 / Set Up Your Camera
OR
Option 1: Wall Mount Option 2: Overhang Mount Option 3: Pole Mount
02 / Mount Your Camera
Tap the button > Add Device in
the app and select your model. Follow
the app instructions to set up your
camera.
The camera is when set on a table or shelf. Mount the camera via when installing outdoors. not waterproof Option 1-3
Route the camera power cord
and Ethernet cable through the
opening of the bracket. Use two
bracket screws to aîž±x the
bracket and camera.
Route the camera power cord
and Ethernet cable through the
opening of the bracket. Use two
bracket screws to aîž±x the
bracket and camera.
1. Aîž±x the Camera and Bracket
Route the camera power cord
and Ethernet cable through the
opening of the bracket. Use two
bracket screws to aîž±x the
bracket and camera.
1. Aîž±x the Camera and Bracket 1. Aîž±x the Camera and Bracket
Stick the mounting template to the
desired mounting place. Drill four
screw holes according to the
template.
2. Drill Holes
Stick the mounting template to the
desired mounting place. Drill four
screw holes according to the
template.
2. Drill Holes
3. Mount the Camera
Φ=6 mm (15/64 in.) Φ=6 mm (15/64 in.)
Insert four mounting anchors into
the holes, then use the mounting
screws to aîž±x the camera and
bracket over the anchors.
3. Mount the Camera
Insert four mounting anchors into
the holes, then use the mounting
screws to aîž±x the camera and
bracket over the anchors.
Mount the camera on the pole
using two pole-mounting loops*
(loop width ≤ 12 mm).
2. Mount the Camera
Flip the page over to continue.
*Pole-mounting loops are not
included.
3. Power Up
Plug in the power adapter or connect
to a PoE router via an Ethernet cable
to power up your camera.
OR
My Home
Insert a 4G Nano SIM card* into the
card slot. If you use an Ethernet
connection, skip this step.
2. Insert SIM Card
*Supported Frequency Bands:
LTE-FDD: B 1/3/5/7/8/20/28
LTE-TDD: B 38/40/41
Troubleshooting Guide:
Scan the QR code or visit
https://www.tp-link.com/support/faq/4046/
4. Install the Antenna
1) Rotate the antenna
clockwise to attach it.
2) Rotate the SMA connector
clockwise to tighten the
antenna.
3) Adjust the antenna vertically
for the best 4G signal.
4) Re-tighten the connector in
case the antenna is loose.
1) Rotate the antenna
clockwise to attach it.
2) Rotate the SMA connector
clockwise to tighten the
antenna.
3) Adjust the antenna vertically
for the best 4G signal.
4) Re-tighten the connector in
case the antenna is loose.
Note: For the cable connection,
ensure the antenna is properly
installed for waterproof
performance.
Note: For the cable connection,
ensure the antenna is properly
installed for waterproof performance.
Note: For the cable connection,
ensure the antenna is properly
installed for waterproof
performance.
4. Install the Antenna
1) Rotate the antenna clockwise to
attach it.
2) Rotate the SMA connector
clockwise to tighten the
antenna.
3) Adjust the antenna to either an
acute angle or horizontal with
the ceiling for the best 4G signal.
4) Re-tighten the connector in
case the antenna is loose.
3. Install the Antenna
SMA Connector
1
2
1
2
SMA Connector
Pole-mounting loops
SMA Connector
1
2
microSD
1. Install the Waterproof Seal/Cap for Power Connectors
2. Install Waterproof Cable Attachments
03 / Install Waterproof Accessories
Install the waterproof seal for the power connectors.
When powered by the adapter
When the Ethernet port connects to a network device the Ethernet port does not connect to a network deviceWhen
Use the waterproof cap to cover the power adapter.
When powered by PoE
Need some help?
Visit https://www.tapo.com/support/
for technical support, the user guide, FAQs,
warranty & more
Install the waterproof cable attachments for the network interface. Make sure each part is securely attached and the waterproof rings are îž°ush to keep out
water.
1) Route the network cable through the following components in
order: x nut, waterproof ring, and then the waterproof jacket.
2) Insert the waterproof ring into the waterproof jacket.
3) Fix the O-ring to the network interface of the camera and connect
the network cables.
4) Attach the network interface with the waterproof jacket, then twist
to lock. Rotate the x nut to secure it to the waterproof jacket.
Fix Nut Waterproof
Ring
O-ring Network
Interface
Waterproof
Jacket
Fix Nut Waterproof
Ring + Plug Network
Interface
Waterproof
Jacket
O-ring
1) Insert the waterproof plug into the waterproof ring, then insert them
into the waterproof jacket.
2) Fix the O-ring to the network interface of the camera. Attach the
network interface with the waterproof jacket, then twist to lock. Rotate
the x nut to secure it to the waterproof jacket.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The
original EU declaration of conformity may be found at
https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017. The original UK declaration of
conformity may be found at https://www.tapo.com/support/ukca/
Safety Information
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions, please
don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not use the product if the casing has been broken. Danger of
electric shock.
• Never touch the product with wet hands.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical care.
Consult the manufacturer of any personal medical devices, such as
pacemakers or hearing aids to determine if they are adequality
shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• This product may interfere with other electronic products such as
TV, radios, personal computers, phones or other wireless devices.
• Adapter should be used indoors where the ambient temperature is
lower than or equal to 40 ºC.
• Operating Temperature: -30 ºC ~ 60 ºC (-22 °F ~ 140 °F )
Please read and follow the above safety information when operating
the device. We cannot guarantee that no accidents or damage will
occur due to improper use of the device. Please use this product with
care and operate at your own risk.
Appearance
Button Explanation System LED Indication
2
3IR LEDs
Lens
1Microphone 4White Light LEDs
5System LED
6Reset
8Speaker
9Ethernet Port (PoE Connector)
7microSD Card Slot
11 Nano SIM Card Slot
12 SMA Female Connector
10 DC Power Connector
B n n d g nli ki g re and ree
Blinkin dg re
Blinking beam r
Blinki kln d cg re qui y
S d doli re
So rlid beam
Solid green
Blinking ree klg n c qui y
Starting up
C ted tonnec o the network
C ted tonnec o the cloud
Unstable 4G signal
Neither a SIM card nor an Ethernet cable inserted
C tonnec ing to the network
(for 4G setup)
Camera resetting
Camera updating
RESET Button
Open the silicone cover. While the camera is powered on, press and
hold the RESET button for at least 5 seconds until the System LED
blinks red. The camera will reset and reboot.
microSD Card Slot
Open the silicone cover and insert a microSD card.* Initialize it on the
Tapo app for local recording.
*microSD card not included.
Nano SIM Card Slot
Open the silicone cover and insert a Nano SIM card for a 4G network
connection.
©2024 TP-Link
Male Power
Connector
Waterproof
Seal
Female Power
Connector
Waterproof
Cap
87
6
2
3
1
4
5 9 10 11 12


Product specificaties

Merk: TP Link
Categorie: Bewakingscamera
Model: Tapo C501

Heb je hulp nodig?

Als je hulp nodig hebt met TP Link Tapo C501 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera TP Link

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera