Totolink X2000R Handleiding

Totolink Router X2000R

Lees hieronder de 📖 handleiding in het Nederlandse voor Totolink X2000R (2 pagina's) in de categorie Router. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

LEDs Status Description

System

Blinking

slowly

Blinking

Off

WAN

LAN

Hardware Installation

Default Wi-Fi Name:

TOTOLINK_X2000R

TOTOLINK_X2000R_5G

Configure the Router

on Phone

EasyMesh Networking Function

Quick Installation Guide

AX1500 Wireless Dual Band Gigabit Router

Apply to: X2000R, X2000RU

(Take X2000R as an Example)

Information in this document is subject to change without prior notice.

Control the power supply to the router.

DescriptionPorts and Buttons

DC In

Power Button

WAN Port

LAN1-LAN4 Ports

RST/WPS Button

Connect to the Power Source.

Connect to the Internet.

Connect to the computers.

WPS/MESH: Press and hold for 1-3 seconds to

activate the WPS/MESH function.

Reset: Press and hold the button for more than

5 seconds until the System indicator blinking to

reset the router

2Open your phone browser, and enter

http://itotolink.net in the address bar. Then

enter for the password, then click admin LOGIN.(P2)

3Click on the coming page.(P3)Quick Setup 4Choose operation mode, take Gateway mode as

an example, then click .(P4)Next

5 Internet Setting. Choose a suitable connection type from

the list and fill in the information required, then click .Next

(P5/P9)

6 Wireless Settings. Create passwords for 2.4G Wi-Fi

and 5G Wi-Fi (Here users could also revise the

default Wi-Fi name) and then click .(P6)Next

7 IPTV mode, choose Disabled, Bridge or Custom, then

click .(P7)Next

8The coming page is the summary information for your setting.

Please remember your Wi-Fi name and password, then click

Done. Then your router will restart automatically. This time your

phone will be disconnected from the router. Please back to the

WLAN list of your phone to choose the new Wi-Fi name and

input the correct password. Now, you could enjoy the Wi-Fi.(P8)

Manufacturer: ZIONCOM ELECTRONICS (SHENZHEN) LTD.

Address: Room 702, Unit D, 4 Building Shenzhen Software Industry Base, Xuefu Road,

Nanshan District, Shenzhen, Guangdong, China

TOTOLINK_X2000R_5G

TOTOLINK_X2000R

Connect the Wi-Fi of the router with your Phone. Find "TTOTOLINK_

X2000R" or "TOTOLINK_X2000R_5G" from the WLAN list on your

Phone, and choose one of them to connect.(P1)

P2 P3 P4 P5

Connection

Type Description

Static IP Input the IP address, Subnet Mask, Default

Gateway, DNS from your ISP.

Dynamic IP No information required. Please confirm with your

ISP if Dynamic IP is supported.

PPPoE Input User Name and Password from your ISP.

PPTP Input Server Address, User Name and Password

from your ISP.

L2TP Input Server Address, User Name and Password

from your ISP.

Caution

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

This equipment should be installed and operated with minimum distance

20cm between the radiator& your body.

FCC Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio

ortelevision reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

WAN port connected

WAN port disconnected

WAN port is transmitting data

Corresponding LAN port connected

Corresponding LAN port disconnected

LAN port is transmitting data

29%0%

X2000R

29%0%

X2000R

TOTOLINK_X2000R

TOTOLINK_X2000R_5G

TOTOLINK_X2000R

TOTOLINK_X2000R_5G

TOTOLINK_X2000R

TOTOLINK_X2000R_5G

TOTOLINK_X2000R

TOTOLINK_X2000R_5G

X2000R has EasyMesh networking function, with the EasyMesh networking function, the network units can work together

to form a unified network with a single network name. When you move around the house, the device will automatically switch

between the two to get the fastest possible speed. The specific operation steps of networking function setting are as follows.

Within 1 meter

Slave Device: Factory State Slave Device: Factory State

1Installation Diagram

Build Master Device Environment

Master Device: Networked

Internet

Make sure your router is connected to Internet before installation. Connect your

phone with the router. Then open web browser, enter http://itotolink.net in address

bar, and log in to the web management interface. Then select EasyMesh setttings,

choose Mesh Settings, click “On/Off” and setting basic information, then click

“Apply”. Wait until the router restart finished as master device.

Build Slave Device Environment

Make sure slave device is powered on, and in factory setting. If you already

changed setup, please reset the router. (You can find how to restore the router

in FAQs)

EasyMesh Networking Pairing

（1）EasyMesh：Press MESH button on master device first, then press

MESH button on slave device, it will pairing successfully within two

minutes. If you want to pair multiple devices, repeat the step above.

（）2 After the mesh connection is successful, use the browser to enter

and click " "-“ " to view thehttp://itotolink.net EasyMesh Mesh Status

status of the mesh connection.

http://itotolink.net

FAQs

1. Unable to log in the router’s web page on Phone?

Please check if your Phone has connected to the Wi-Fi of the router and make

sure you have entered the correct default gateway http://itotolink.net.

2. If I forget the router’s login password, how to reset to the

factory settings?

Keep the router powered on, then press and hold the RST/WPS button for 5-8

seconds until system indicator becomes blinking quickly. The router will restart

automatically, wait for a while, the password would be resumed to admin.

3.After the slave device is powered off, do I need to reorganize

the network?

No, just turn on the power again.

4.If I want to add a new slave device to the existing Wi-Fi

networking system, do I need to reorganize the network for all

routers?

No, as long as the slave device is within 1 meter of the Wi-Fi of the master

device，and connected to the power.Then the slave device environment can

be set up according to the manual of EasyMesh Networking Function

introduction.

5.Why is my EasyMesh network unsuccessful all the time?

First: Must be matched within 1 meter of the master device.

Next: The master device needs to set up the Internet according to the second

step of the manual, and the master device needs to remain connected to the

network when the slave device is planned to network.

Finally: The software version is unified to the latest version, please go to

TOTOLINK official website to download：www.totolink.cn.

6.Why is there no wireless setting in the advanced settings after

EasyMesh is turned on?

This function can be set on the EasyMesh page.

(choose one way from phone or computer

to configure)

http://itotolink.net

TOTOLINK_test

TOTOLINK_test_5G

http://itotolink.net

TOTOLINK_test

TOTOLINK_test_5G

USB Port

(Only for X2000RU) Connect to the USB storage or other USB devices

Blinking

quickly

Enabled WPS/MESH function

System is not running or don't boot

System is running normally

The factory default setting is enabled

Product specificaties

Merk:	Totolink
Categorie:	Router
Model:	X2000R
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Breedte:	241 mm
Diepte:	147 mm
Hoogte:	48.5 mm
Materiaal behuizing:	Kunststof
LED-indicatoren:	LAN,System,WAN
Type verpakking:	Doos
Aan/uitschakelaar:	Ja
Wi-Fi-standaarden:	802.11a,802.11b,802.11g,Wi-Fi 4 (802.11n),Wi-Fi 5 (802.11ac),Wi-Fi 6 (802.11ax)
USB-poort:	Nee
Ethernet LAN:	Ja
Type stroombron:	DC
Meegeleverde kabels:	DC,LAN (RJ-45)
Inclusief AC-adapter:	Ja
Indicatielampje:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	4
Netvoeding:	12 W
Aansluiting voor netstroomadapter:	Ja
Plug and play:	Ja
SIM-kaartsleuf:	Nee
3G/4G USB modem compatibiliteit:	Nee
Geheugenkaart slot(s):	Nee
Wifi-band:	Dual-band (2.4 GHz / 5 GHz)
Wifi-standaard:	Wi-Fi 6 (802.11ax)
WLAN gegevensoverdrachtsnelheid (max):	1501 Mbit/s
WLAN gegevensoverdrachtsnelheid (eerste band):	1201 Mbit/s
WLAN gegevensoverdrachtsnelheid (tweede band):	300 Mbit/s
Interfacetype Ethernet LAN:	Gigabit Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Bekabelingstechnologie:	10/100/1000Base-T(X)
Netwerkstandaard:	IEEE 802.11a,IEEE 802.11ac,IEEE 802.11ax,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n
Ondersteunde beveiligingsalgoritmen:	64-bit WEP,128-bit WEP,WPA,WPA2
Antennas quantity:	4
Antenne versterkingsniveau (max):	5 dBi
Temperatuur bij opslag:	-40 - 70 °C
Upgraden van firmware mogelijk:	Ja
Web-gebaseerd management:	Ja
Luchtvochtigheid bij opslag:	5 - 90 procent
Reset button:	Ja
Externe adapter:	Ja
MAC adres filtering:	Ja
Ethernet WAN:	Nee
Firewall:	Ja
Output current:	1 A
Spanning:	12 V
Snelle installatiehandleiding:	Ja
DHCP server:	Ja
Universal Plug and Play ( UPnP ):	Ja
Ouderlijk toezicht:	Ja
Quality of Service (QoS):	Ja
Auto MDI/MDI-X:	Ja
Wifi Multimedia (WMM)/(WME):	Ja
Access Control List (ACL):	Ja
DHCP client:	Ja
Power over Ethernet (PoE):	Nee
DMZ support:	Ja
Toegang voor gasten:	Ja
DSL WAN:	Nee
WPS Push Button Security:	Ja
URL- filtering:	Ja
Afneembare antennes:	Nee
Automatische kanaalselectie:	Ja
Type WAN-aansluiting:	RJ-45
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Stroomverbruik (typisch):	12 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Type product:	Router om neer te zetten
Aantal producten inbegrepen:	1 stuk(s)
MU-MIMO-technologie:	Ja
Intelligent Mesh-technologie:	Ja
Antenne-ontwerp:	Extern
Dynamic DNS (DDNS):	Ja
Port forwarding:	Ja
Web-based installatiewizard:	Ja
Bandbreedteregeling:	Ja