Tissot T-Navigator Handleiding

Tissot Horloge T-Navigator

Lees hieronder de 📖 handleiding in het Nederlandse voor Tissot T-Navigator (2 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Analog Watches

User's Manual

www.tiss o t .ch 121_ EN / 11.11

1/2

Display and functions

Seconds hand

Minute hand

Hour hand

Date*

Day*

* According to model

* Models with a screwed crown :

IA Initial position (screwed down, not pulled out)

IB Winding position (unscrewed, not pulled out)

Analog Watches

www.t issot.ch 121_EN / 11.11

2/2

Congratulations

We would like to congratulate you on having chosen a watch from TISSOT ®,

one of the most highly renowned Swiss brands in the world. Meticulously

designed, using only the highest quality materials and components, your

watch is protected against shock loads, variations in temperature, water

and dust.

To ensure that your watch operates with perfect precision for many years

to come, we advise you to pay very careful attention to the advice provided

hereafter.

This instructions are valid for all TISSOT ® mechanical (hand-wind-

ing or automatic), quartz, solar quartz or autoquartz watches. Please

refer to the explanations relating specifically to your own model of watch.

Winding

Models with a screwed crown

To ensure that they remain water-resistant, some models are fitted with

a screwed crown. Before setting the time or date* or day*, you must first

unscrew the crown into position

before you can pull it out into position

III.

Important: After each operation, you must always screw the crown

back down to ensure that your watch remains water-resistant.

Mechanical watches

Hand-wound watches must be wound every day. To do so, turn the crown

clockwise to position I.

For automatic watches, turn the crown clockwise to position (approximately I

ten turns). The automatic winding system then ensures it is fully wound.

Quartz watches

Quartz watches are powered by battery and do not require any winding.

Autoquartz watches

Turn the crown into position

(or

for models with a screwed crown) for at

least 1 minute, the time it takes for your watch to restore normal operation.

It will then have a power reserve of between 16 and 24 hours. To recharge

your watch quickly, move it from side to side a few times.

Solar watches

To recharge the accumulator, expose your watch face to either sunlight or

artificial light (no crown winding).

Settings

Note : Please take due account of the previous information if your

watch is fitted with a screwed crown.

Setting the time

Pull the crown out to position

III

and turn it clockwise or counterclockwise

to set the desired time.

On some models with a seconds hand, you can synchronize it with an official

time signal (radio/ TV/Internet). When the crown is pulled out in position

III,

the seconds hand is stopped. As soon as the time setting has been synchro-

nized, push the crown back down into position

(and tighten it back down on

models with a screwed crown).

Fast correction of the date* and day*

Pull the crown out to position

and turn it clockwise until the correct date

is displayed, counterclockwise until the correct day is displayed. During this

operation, your watch will continue to function normally, so you will not need

to alter the time.

Technical information

TISSOT® Automatic watches gain their energy from an oscillating weight

which is activated in response to movements of your wrist. This movement

ensures that the watch retains the correct time. Automatic watches do not

need a battery. Depending on the models, the power reserve ranges from

40 to 46 hours.

Note: Accuracy is influenced by the way the watch is worn.

TISSOT

® Quartz watches benefit from the incomparable precision of quartz.

Their power reserve usually enables them to operate for more than 2 years

in continuous use. All you have to do is to set the time, and occasionally also

the date if your watch is equipped with a display of this kind (refer to the

section on «Settings»).

E.O.L. (End of Life) function

Once it has been used up, the battery should be replaced without delay. If

the seconds hand jumps every 4 seconds, this indicates that the battery has

reached the end of its useful life and should be replaced in the very near

future.

TISSOT

® Autoquartz watches benefit from an unusual innovation which

combines auto-recharge with the incomparable precision of quartz, but

without a battery.

In keeping with an automatic watch, the energy required for your watch to

operate is generated by the movement of an oscillating weight. However, in

this particular model, mechanical energy is transformed into electrical power

by a micro-generator which recharges an accumulator. The accumulator,

monitored by an electronic circuit, supplies power to the movement. With

its charge at maximum, the power reserve of your watch can reach

60 days for ladies’ models, and 100 days for men’s models.

The advantages of Autoquartz technology

Up-to-date technology with impeccable environmental credentials (no bat-

tery), the precision of quartz, exceptional autonomy.

Power supply

The lithium accumulator has a service life of more than 10 years. Never

replace it with a conventional silver-oxide battery because this would irrevo-

cably destroy the movement.

E.O.E. (End of Energy) function

Your TISSOT® Autoquartz watch is equipped with an E.O.E. (End of Energy)

type of energy requirement indicator. If the seconds hand jumps every 4 sec-

onds, this indicates that your watch has run down and needs to be recharged.

At this point, it still has a power reserve of between 16 and 24 hours,

depending on the model.

Care and maintenance

We would advise you to clean your watch regularly (except for the leather

strap) using a soft cloth and warm soapy water. After immersion in salty

water, rinse it in fresh water and leave it to dry completely.

Do not leave it anywhere where it might be subjected to major variations in

temperature or humidity, in direct sunlight or near strong magnetic fields.

We would advise you to have your watch inspected every 3 to 4 years by an

approved TISSOT ® representative or retailer. To benefit from the highest

standards of service and to ensure your guarantee remains in force, please

always contact an approved TISSOT ® representative or retailer.

Quartz or Autoquartz watches

If you envisage not wearing your watch for several weeks or months,

we would advise you to put it to one side with the crown pulled out to

the last stop. This will substantially reduce power consumption.

Collection and treatment of end of life quartz watches*

This symbol indicates that this product should not be disposed with

household waste. It has to be returned to a local authorized collec-

tion system. By following this procedure you will contribute to the

protection of the environment and human health. The recycling of

the materials will help to conserve natural resources.

Battery type: button-type zinc-silver oxide primary battery cell.

Autoquartz:

button-type lithium-manganese dioxide primary battery cell.

* valid in the EU member states and in any countries with corresponding

legislation.

Product specificaties

Merk:	Tissot
Categorie:	Horloge
Model:	T-Navigator
Gewicht:	130 g
Type horloge:	Horloge
Chronograaf:	Nee
Type wijzerplaat horloge:	Analoge wijzerplaat
Waterdicht:	Ja
Waterbestendig druk:	10 ATM
Waterbestendig diepte:	100 m
Agenda:	Ja
Type kalender:	Overdag
Horlogekast materiaal:	Roestvrijstaal
Kleur behuizing:	Black,Stainless steel
Band materiaal:	Rubber
Hoofdkleur van band:	Roestvrijstaal
Glas type van horloge:	Saffier
Hoesvorm:	Rond
Hoofdkleur van wijzerplaat:	Zwart
Geslacht:	Man
Stijl becijfering horloge:	Arabische cijfers/geen cijfers
Kleur becijfering horloge:	Zilver
Aantal wijzers:	3
Kastdiameter:	44 mm
Kastdikte:	12.59 mm
Productontwerp:	Casual
Swiss Made:	Ja