Teka DW8 45 FI Handleiding

Teka Vaatwasser DW8 45 FI

Lees hieronder de 📖 handleiding in het Nederlandse voor Teka DW8 45 FI (29 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/29
Contents
1
1.
Description of the controls ________________________________ 2
2.
Operating instructions ___________________________________ 11
3.
Cleaning and maintenance _______________________________ 23
4.
Troubleshooting _______________________________________ 28
Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need to use your dishwasher safely, correctly and in the
most satisfactory manner.
Following the cleaning instructions provided here will keep your
dishwasher's performance at peak levels in the long term.
USER INSTRUCTIONS: these consist of recommendations for using the
appliance, a description of its controls and of the correct cleaning and
maintenance procedures.
User instructions
2
1. Description of the controls
1.1 Upper panel
All the dishwasher controls are grouped on the upper panel. Switching on,
programming, switching off etc. are only possible when the door is open.
1 ON/OFF BUTTON
Press this button to switch the dishwasher on/off.
2
SELECTED PROGRAM INDICATOR LIGHTS
This light indicates the program selected and the occurrence of a
fault
(Troubleshooting).
3
PROGRAM SELECTION BUTTON
By pressing this button in sequence it is possible to select the
desired program.
4
WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT
The light flashes to indicate that the appliance is in “water hardness
adjustment” mode.
SALT WARNIN LIGHT
This light indicates the salt is finished.
5 RINSE AID WARNING LIGHT
This light indicates the rinse aid is finished..
6
EXTRA PROGRAM + EXTRA OPTION BUTTON
(see “EXTRA OPTIONS” section)
The button controls selection of the extra programs. (see table).
7
EXTRA PROGRAM LIGHT
Illuminates to indicate that one of the five extra programs (see
table) is going to be executed.
User instructions
3
8
HALF LOAD OPTION + EXTRA OPTION BUTTON
(see “EXTRA OPTIONS” section)
Press the button to enable/disable the option.
9 HALF LOAD OPTION LIGHT
Illuminates to indicate that the function is activated.
10
"3/1" OPTION (EXTRA OPTION) LIGHT
Illuminates to indicate that the function is activated.
11
PROGRAM DELAY BUTTON
Press this button to delay the start of the program.
12
INFORMATION DISPLAY (1 or 3 digits depending on model)
N.B.: symbols and styling are guideline and may vary depending on
the model or version of the dishwasher purchased.
Information displayed
no Program duration yes
no Remaining program
time yes
1 - 9 hours Delayed start 1 - 24 hours
E
Error message
Err
SWITCHING ON, SETTING THE WASH PROGRAM AND STARTING
THE PROGRAM
Press the button ; the ON/OFF (1) PROGRAM INDICATOR LIGHT
(2) will come on
Keep pressing the button until the PROGRAM SELECTION (3)
indicator light for the required program lights up
Select the (if any, depending on model) required option
Close the door and after about the program will start; 2 seconds
while it is running, the corresponding will flash (program LIGHT
running indicator).


Product specificaties

Merk: Teka
Categorie: Vaatwasser
Model: DW8 45 FI

Heb je hulp nodig?

Als je hulp nodig hebt met Teka DW8 45 FI stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Vaatwasser Teka

Handleiding Vaatwasser

Nieuwste handleidingen voor Vaatwasser