Technoline WS 8055 Handleiding

Technoline Wekkerradio WS 8055

Lees hieronder de 📖 handleiding in het Nederlandse voor Technoline WS 8055 (7 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

              

Battery cover

Battery compartment

Battery cover

SNOOZE/LIGHT key

MOON PHASE CLOCK

Instruction Manual

INTRODUCTION

Congratulations on purchasing this state-of-the-art Moon Phase Clock as an example of

superior design and engineering. Providing radio-controlled time, date, indoor temperature

display, and Moon phases, this innovative clock is ideal for home or office use. Operation

of this product is simple and straightforward. By reading this operating manual, the user will

receive a better understanding of the functions and the optimum benefit of all its features.

MOON PHASE CLOCK:

FEATURES

DCF-77 Radio controlled time with manual setting option

12/24 hour display

Time display: hour, minute and seconds

Calendar display

Weekday display with seven language options: German, English, French, Spanish,

Italian, Dutch and Danish.

Time zone options ±12 hours

Alarm setting with snooze function

Indoor temperature display in degree Celsius or Fahrenheit

Display of 8 Moon phases throughout the year

E.L. back light

Table standing

SETTING UP

1. Slide the battery cover open on the Moon Phase Clock as indicated.

LCD 2

display

Function keys

LCD 1

display

2. Checking the correct polarization, insert 2 x AA IEC LR6, 1.5V batteries into the

battery compartment and replace the battery cover.

3. Once the batteries are in place while beep sounds shortly, all segments of the LCD

will light up briefly. Then the indoor temperature, the time as 0:00, the date as 1/1,

weekday as MON and the Moon phase will be displayed.

4. The DCF-77 time code reception will automatically start. This takes typically between

3 - 5 minutes in good conditions. If after 10 minutes the DCF time has not been

received, the clock will automatically attempt to receive the DCF time at the next full

hour. When this is successful, the received time will be displayed. The date and

Moon phase will also be updated with the received time (Please refer also to notes

on “Radio controlled time”)

BATTERIES CHANGE

For best performance, batteries should be replaced at least once and a year to maintain

the best running accuracy. Ensure that the batteries used are new of the correct size.

Note:

Always wait for 2 minutes after removing the batteries before reinserting, otherwise start up

and transmission problems may occur.

Please help in the preservation of the environment and return used

batteries to an authorized depot.

FUNCTION KEYS

The Moon Phase Clock has four easy to use keys:

SET key: To enter the manual setting modes if press for about 1 second

To activate the E.L. back light for about 4 seconds

To stop the alarm

+ key: To change the values in all setting modes

To alternate between indoor temperature and seconds display

To switch ON the E.L. back light for about 4 seconds

To stop the alarm

ALARM key: To enter the alarm setting mode if press for about 1 seconds

To activate the E.L. back light for about 4 seconds

To set the alarm ON/OFF

To stop the alarm

SNOOZE/LIGHT key: To activate the snooze function during alarm

To switch OFF the alarm for the next 24 hours if pressed for about

1 second during alarm function or snooze

To display the alarm time and to activate the E.L. back light for 4

seconds

To stop the alarm

To exit any setting modes

Radio controlled reception icon

Indoor Temperature display

in ºC/ºF or seconds display

Date

Moon phase icon Weekday

LCD SCREEN

The Moon Phase Clock's LCD is divided into 2 sections and once the batteries are

inserted, all the segments will light up briefly before displaying:

DCF time Alarm icon

LCD1- DCF RADIO CONTROLLED TIME, ALARM AND SNOOZE

Once the batteries are inserted into the battery compartment, the Moon Phase Clock will

receive the DCF time within 3-5 minutes. Once received, all segments of the clock will

display the informations accordingly, then no further reception will take place for the DCF

signal that day.

The DCF reception takes places at 2:00 and 3:00 am each day. If the clock is unable to

receive the reception, it will attempt to receive the DCF time at the next full hour or as long

as it receives the DCF time successfully.

The time base for the radio controlled time is a Cesium Atomic Clock operated by the

Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less

than one second in one million years. The time is coded and transmitted from Mainflingen

near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of

approximately 1,500 km. Your radio-controlled Moon Phase Clock receives this signal and

converts it to show the precise time in summer or wintertime. The quality of the reception

depends greatly on the geographic location. In normal cases, there should be no reception

problems within a 1500km radius of Frankfurt.

When the time code is received, the DCF tower becomes permanently lit and the time will

be displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all,

then please take note of the following:

Recommended distance to any interfering sources like computer monitors or TV sets

is a minimum of 1.5 - 2 meters.

Within ferro-concrete rooms (basements, superstructures), the received signal is

naturally weakened. In extreme cases, please place the unit close to a window and/

or point its front or back towards the Frankfurt transmitter.

During nighttime, the atmospheric disturbances are usually less severe and

reception is possible in most cases. A single daily reception is adequate to keep the

accuracy deviation below 1 second.

Product specificaties

Merk:	Technoline
Categorie:	Wekkerradio
Model:	WS 8055
Kleur van het product:	Zwart, zilver
Breedte:	118 mm
Diepte:	100 mm
Hoogte:	50 mm
Soort:	Digitale wekker
Meeteenheid temperatuur:	°C
Accu/Batterij voltage:	1.5 V
Alarm functie:	Ja
Agenda:	Ja
Snooze functie:	Ja
Ondersteund aantal accu's/batterijen:	2
Aantal per verpakking:	1 stuk(s)
Wekker:	Ja
Backlight:	Ja
Backlight-kleur:	Blauw
Temperatuurindicatie:	Ja
Thermometer:	Ja
Bereik temperatuurmeting:	0 - 50 °C
Type beeldscherm:	LCD
Type batterij:	AA IEC LR6
Projectie functie:	Date,Temperature,Time
Gesproken talen:	DAN,DEU,DUT,ENG,ESP,FRE,ITA