Technoline WS 8001 Handleiding

Technoline Wekkerradio WS 8001

Lees hieronder de 📖 handleiding in het Nederlandse voor Technoline WS 8001 (3 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 108 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Foldable

stand

Hanging Holes

Foldable stand

Battery cover

Radio controlled reception icon

Indoor Temperature display

in ºC/ºF or seconds display Date

Moon phase icon

Weekday

DCF time Alarm icon

Battery compartment

Battery

cover

              

MOON PHASE CLOCK

Instruction Manual

INTRODUCTION

Congratulations on purchasing this state-of-the-art Moon Phase Clock as an example of superior

design and engineering. Providing radio-controlled time, date, indoor temperature display, and Moon

phases, this innovative clock is ideal for home or office use. Operation of this product is simple and

straightforward. By reading this operating manual, the user will receive a better understanding of the

functions and the optimum benefit of all its features.

Moon Phase Clock:

FEATURES

DCF-77 Radio controlled time with manual setting option

12/24 hour display

Time display: hour, minute and seconds

Calendar display

Weekday display with seven languages option: German, English, French, Spanish, Italian, Dutch

and Danish.

Time zone options ±12 hours

Alarm setting with snooze function

Indoor temperature display in degree Celsius or Fahrenheit

Display of 8 Moon phases throughout the year

Wall mountable or free standing

SETTING UP

1. Slide the battery cover open on the Moon Phase Clock as indicated.

2. Checking the correct polarization, insert 2 x AA IEC LR6, 1.5V batteries into the battery

compartment and replace the battery cover.

3. Once the batteries are in place while beep sounds shortly, all segments of the LCD will light up

briefly. Then the indoor temperature, the time as 0:00, the date as 1/1, weekday as MON and the

Moon phase will be displayed.

4. The DCF-77 time code reception will automatically start. This takes typically between 3 - 5

minutes in good conditions. If after 10 minutes the DCF time has not been received, the clock

will automatically attempt to receive the DCF time at the next full hour. When this is successful,

the received time will be displayed. The date and Moon phase will also be updated with the

received time (Please refer also to notes on “Radio controlled time”)

BATTERIES CHANGE

For best performance, batteries should be replaced at least once and a year to maintain the best

running accuracy. Ensure that the batteries used are new of the correct size.

Note:

Always wait for 30 seconds after removing the batteries before reinserting, otherwise start up and

transmission problems may occur.

Please help in the preservation of the environment and return used batteries to an

authorized depot.

FUNCTION KEYS

The Moon Phase Clock has four easy to use keys:

Function keys

SET key: To enter the manual setting modes if press for about 1 second

To stop the alarm

+ key: To change the values in all setting modes

To alternate between indoor temperature and seconds display

To stop the alarm

LCD 2 display

ALM key: To enter the alarm setting mode if press for about 1 seconds

To set the alarm ON/OFF

To stop the alarm

SNOOZE key: To activate the snooze function during alarm

To switch OFF the alarm for the next 24 hours if pressed for about 1 second during

alarm function or snooze

To stop the alarm

To exit any setting modes

LCD SCREEN

The Moon Phase Clock's LCD is divided into 2 sections and once the batteries are inserted, all the

segments will light up briefly before displaying:

LCD 1 display

LCD1- DCF RADIO CONTROLLED TIME, ALARM AND SNOOZE

Once the batteries are inserted into the battery compartment, the Moon Phase Clock will receive the

DCF time within 3-5 minutes. Once received, all segments of the clock will display the informations

accordingly, then no further reception will take place for the DCF signal that day.

The DCF reception takes places at 2:00 and 3:00 am each day. If the clock is unable to receive the

reception, it will attempt to receive the DCF time at the next full hour or as long as it receives the DCF

time successfully.

The time base for the radio controlled time is a Cesium Atomic Clock operated by the Physikalisch

Technische Bundesanstalt Braunschweig which has a time deviation of less than one second in one

million years. The time is coded and transmitted from Mainflingen near Frankfurt via frequency signal

DCF-77 (77.5 kHz) and has a transmitting range of approximately 1,500 km. Your radio-controlled

Moon Phase Clock receives this signal and converts it to show the precise time in summer or

wintertime. The quality of the reception depends greatly on the geographic location. In normal cases,

there should be no reception problems within a 1500km radius of Frankfurt.

When the time code is received, the DCF tower becomes permanently lit and the time will be

displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all, then

please take note of the following:

Recommended distance to any interfering sources like computer monitors or TV sets is a

minimum of 1.5 - 2 meters.

Within ferro-concrete rooms (basements, superstructures), the received signal is naturally

weakened. In extreme cases, please place the unit close to a window and/ or point its front or

back towards the Frankfurt transmitter.

During nighttime, the atmospheric disturbances are usually less severe and reception is possible

in most cases. A single daily reception is adequate to keep the accuracy deviation below 1

second.

LCD2- DATE, WEEKDAY, MOON PHASE, SECONDS AND INDOOR TEMPERATURE

Once the DCF time has been received, the date (day and month) , weekday, Moon phase and indoor

temperature will be displayed accordingly.

DATE AND WEEKDAY

The date and weekday will be automatically displayed after the DCF time has been received.

MOON PHASES SYMBOLS:

The Moon Phase Clock will display all 8 Moon phases throughout the year.

New Moon Waxing Crescent First Quarter Waxing Gibbous

Full Moon Waning Gibbous Last Quarter Waning Crescent

INDOOR TEMPERATURE AND SECONDS DISPLAY

The indoor temperature will be displayed and updated every 10 seconds.

The seconds can be displayed when pressing the + key. To return to the indoor temperature display,

press again the + key.

MANUAL SETTING

By pressing and holding the SET key for about 1 second, the following settings can be changed.

1. Time zone setting

2. Language for weekday display setting

3. Time setting (hour and minutes)

4. Calendar setting (year, month, day and weekday)

5. 12 or 24 hour setting

6. Temperature setting in °C (degrees Celsius) or °F (degrees Fahrenheit)

TIME ZONE SETTING

The time zone can be be ajusted between ±12 hours. To change the time zone:

1. Press the + key to set the time zone (default setting 0 hour)

2. Using the SET key to move into the “Language setting” mode. To exit the programming mode,

press the SNOOZE key anytime or wait around 15 seconds to automatically return to normal

display mode.

LANGUAGE FOR WEEKDAY DISPLAY SETTING

The weekday can be shown in seven different languages (D=German, GB=English, F=French,

E=Spanish, I=Italian, NL=Dutch and DK=Danish), and every weekday is shown with 3 letters each

(e.g. MON=Monday=Lundi), except for Dutch (only 2 letters).

1. Press the + key to select the desired language. (default in “D” )

2. Using the SET key to move into the “Time setting” mode. To exit the programming mode, press

the SNOOZE key anytime or wait around 15 seconds to automatically return to normal display

mode.

TIME SETTING

1. After entering into the time setting, the Hour digit in the time section starts flashing

2. Press the + key to set the hours of the current time and then followed by pressing the SET key to

move into the minutes mode.

3. Again, press the + key to set the minutes of the current time (by holding the key down, the digits

are incremented in steps of five).

4. Press the SET key to enter the “Calendar setting” mode or do not touch any buttons for around

15 seconds to confirm the time setting. To exit the programming mode, press the SNOOZE key

anytime. The mode will return to normal.

CALENDAR SETTING

1. The year digit starts flashing (default setting “00”)

2. Press the + key to set the current year, (The range runs from 2000 to 2019, and only last 2 digits

of the year will be displayed. e.g. 2000=00) and then followed by pressing the SET key to move

into the month mode.

3. Again, press the + key to set the current month and then followed by pressing the SET key to

move into the date mode.

4. Press the + key to set the current date and then followed by pressing the SET key to move into

the weekday mode.

5. Once again, press the + key to set the current weekday.

6. Press the SET key to enter the “12/24 hour display setting” mode or do not touch any buttons for

around 15 seconds to confirm the calendar setting. To exit the programming mode, press the

SNOOZE key anytime. The mode will return to normal

12/24 HOUR DISPLAY SETTING

The default time display for the clock is 24 hour, to select 12 hour display:

1. “24” will start flashing on the LCD, press the + key to select “12”

2. Press the SET key to enter the “Celsius or Fahrenheit degree setting” mode or do not touch any

buttons for around 15 seconds to confirm the 12/24 hour display setting. To exit the

programming mode, press the SNOOZE key anytime. The mode will return to normal.

CELSIUS OR FAHRENHEIT DEGREE INDOOR TEMPERATURE SETTING

Following from the 12/24 hour setting mode, the indoor temperature setting display can be changed.

1. “°C” will appear on the LCD (default in “°C”). If “°C” is displayed then the current temperature

reading is set to Celsius. If “°F” is displayed then the current temperature reading is set to

Fahrenheit.

2. To select the temperature setting, simply press the + key.

3. Press SET key to confirm or do not touch any buttons for around 15 seconds or press the

SNOOZE key to exit the programming mode anytime The mode will return to normal.

ALARM SETTING

The maximum alarm duration is 80 seconds. To set the alarm function:

1. Press the ALM key for about 1 second or until the digits start flashing in the LCD to enter into the

Alarm setting mode. The hour digits start flashing.

2. Press the + key to set the hour.

3. Press the ALM key to enter the minute mode. The minute digits start flashing.

4. Press the + key to set the minutes.

5. Press the ALM key or the SNOOZE key to exit the Alarm setting mode or wait for 15 seconds

automatic timout.

Note:

If the ALM key is pressed for a short time, the alarm toggles between ON/OFF. At the same time, the

current alarm time will be displayed for about 4 seconds.

TO ACTIVATE / DEACTIVATE THE ALARM:

The alarm will automatically be ON upon entering and exiting the Alarm setting mode. To desactivate

the alarm (OFF), use the ALM key in normal mode display.

SNOOZE SETTING

When pressing the SNOOZE key during alarm sounding, the snooze function is activated for a

duration of 9 full minutes.

When keeping the SNOOZE key during alarm sounding for 1 second, after confirmation of a

"beep“ sound, the alarm will switch OFF for the next 24 hours and no snooze function will be

activated.

Note:

If the SNOOZE key is pressed for about 1 second, except during alarm ringing, it will display the alarm

time for about 4 seconds.

POSITIONING THE MOON PHASE CLOCK

The Moon Phase Clock can be either free standing or hanging on a wall:

To free stand:

Simply unfold the 2 stands at the back of the clock and place on a flat surface.

To wall mount:

1. Fix a screw into the desired wall, leaving the head extended out by about

5mm

2. Using the Moon Phase Clock‘s hanging hole, carefully hang it onto the screw.

Note:

Always ensure that the Moon Phase Clock locks onto the screw before releasing.

CARE AND MAINTENANCE

Avoid placing the unit in areas prone to vibration and shock as these may cause damage.

Avoid areas where the unit can be exposed to sudden changes in temperature, i.e. direct

sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes which

reduces the accuracy of readings.

When cleaning the LCD and casing, use a soft damp cloth only. Do not use solvents or scouring

agents.

Do not submerge the unit into water.

Immediately remove all low powered batteries to avoid leakage and damage. Replace only with

new batteries of the recommended size.

Do not make any repairs to the unit. Please return it to the original point of purchase for repair by

a qualified engineer. Opening and tampering with the unit may invalidate its guarantee.

SPECIFICATIONS

Indoor temperature measuring range : 0ºC to +50ºC with 0.1ºC resolution

32ºF to +122ºF with 0.2ºF resolution

("--.-" displayed if outside this range)

Indoor temperature checking interval : every 10 seconds

Power source : 2 x AA, IEC LR6, 1,5V batteries

(Alkaline batteries recommended)

Battery life : about 12 months

Dimensions (L x W x H) : 290 x 25 x 190mm

LIABILITY DISCLAIMER

The manufacturer and supplier cannot accept any responsibility for any incorrect readings and

any consequences that occur should an inaccurate reading take place.

This product is only designed for use in the home

This product is not to be used for medical purposes or for public information.

The specifications of this product may change without prior notice.

This product is not a toy. Keep out of the reach of children

No part of this manual may be reproduced without written authorization of the manufacturer.

R&TTE Directive 1999/5/EC

To be used in EC Member and EFTA States.

Summary of the Declaration of Conformity : We hereby declare that this wireless transmission device

does comply with the essential requirements of R&TTE Directive 1999/5/EC.

Product specificaties

Merk:	Technoline
Categorie:	Wekkerradio
Model:	WS 8001

Heb je hulp nodig?

Als je hulp nodig hebt met Technoline WS 8001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wekkerradio Technoline

Technoline Modell N Handleiding

6 December 2023

Technoline Modell H Handleiding

30 Augustus 2023

Technoline Modell F Handleiding

30 Augustus 2023

Technoline WT 767 Handleiding

16 Juni 2023

Technoline WT 87 Handleiding

16 Juni 2023

Technoline WT 330 Handleiding

14 Juni 2023

Technoline Modell L Handleiding

10 Juni 2023

Technoline WT 745 Handleiding

10 Juni 2023

Technoline WT 753 Handleiding

9 Juni 2023

Technoline WS 8056 Handleiding

2 Juni 2023

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio

TFA Clocco Cloud 60.2040.15 Handleiding

19 November 2024

TFA 60.2044.01 Handleiding

19 November 2024

TFA Clocco Desk 60.2041.15 Handleiding

19 November 2024

Techno Line Modell N Handleiding

18 November 2024

Techno Line Modell H Handleiding

18 November 2024

Techno Line Modell F Handleiding

18 November 2024

Techno Line WT 330 Handleiding

18 November 2024

Techno Line WT 344 Handleiding

18 November 2024

Techno Line WT 494 Handleiding

18 November 2024

Techno Line Modell L Handleiding

18 November 2024