Technaxx TX-57 Handleiding

Technaxx Bewakingscamera TX-57

Lees hieronder de 📖 handleiding in het Nederlandse voor Technaxx TX-57 (13 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

Technaxx® *

User Manual

Easy IP-Cam Socket FullHD TX-57

(Camera for a socket)

This device complies with the requirements of the standards referred to the Directive

R&TTE 1999/5/EC www.technaxx.de/. The Declaration of Conformity you ﬁnd here: (in

bar at the bottom “Konformitätserklärung”). Before using the device the ﬁrst time, read the

user manual carefully. Service phone No. for technical support: 01805 012643 (14

cent/minute from German ﬁxed-line and 42 cent/minute from mobile networks).

Free Email: support@technaxx.de

Content

Content ................................................................................................................................1

Features...............................................................................................................................2

1. Device structure...............................................................................................................2

2. Initiate Easy IP-Cam ........................................................................................................3

Install Easy IP-Cam..........................................................................................................3

Access AP Mode ..............................................................................................................3

3. Setup Easy IP-Cam .........................................................................................................3

Install Technaxx Easy IP App ...........................................................................................3

Add Camera ( ).............................................................................................................3

Easy Mode Add Camera ..................................................................................................4

Monitor Camera ...............................................................................................................5

Advance Function ............................................................................................................5

Camera list ( )...............................................................................................................5

Event list ( )..................................................................................................................5

Photos/Videos ( ) .........................................................................................................6

Camera Settings ( )......................................................................................................6

4. Event Record ...................................................................................................................6

Monitor Event Detection...................................................................................................7

View Event Record...........................................................................................................7

5. Technical speciﬁcations ...................................................................................................8

GNU GENERAL PUBLIC LICENSE ............................................................................9

Preamble .....................................................................................................................9

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION10

Features

 Ideal for viewing and monitoring rooms and other indoor locations

 Easy power supply over a socket - no power cable needed

 Push notiﬁcation via APP when motion detection

 FullHD video resolution 1080P (1920x1080), 30fps

 IR LED for night lighting & ambient light sensor

 2MP CMOS image sensor & PIR sensor

 P2P Cloud monitoring camera

 Easy setup at iOS/Android device by QR code scanning

 Built-in microphone for audio recordings, iOS & Android APPs

for live monitoring & recording & playback

1. Device structure

1 Lens

2 PIR Sensor

3 Microphone

4 Light Sensor

5 Exchangeable AC Plug

1 IR LED

2 Ready LED

3 Status LED

4 MicroSD Card Slot

5 Reset Button

2. Initiate Easy IP-Cam

The Easy IP-Cam has a built-in WIFI chipset and can directly connect to your home WIFI

network. Therefore, for the ﬁrst time use the Easy IP-Cam, you need to set up the WIFI

network and assign an available network which can link to the internet for the camera from

the AP (Access Point) Mode.

Install Easy IP-Cam

Insert a MicroSD card in the MicroSD card slot max.32GB.

Insert the AC Plug of the camera to the wall AC outlet and the Easy IP-Cam turns on.

Adjust the camera up or down to the applicable angle.

Note:

1. The Easy IP-Cam has no built-in battery. If you take out the camera from the AC outlet,

the camera will be oﬄine and turns off.

2. All settings have saved in camera even power oﬀ. When the power supply restore, the

camera will turn on and reconnect to the set WIFI network automatically.

Access AP Mode

If the Easy IP-Cam was never be used. It will enter the AP Mode directly.

The RED Status LED lights on for about 8 seconds to initiate. After that it ﬂashes slowly for 20 or

more seconds and active the WIFI function.

The Ready LED ﬂashing fast in GREEN when the camera enters the AP Mode.

Note: Press the Reset Button to restore the default setting of camera in AP Mode.

3. Setup Easy IP-Cam

Install Technaxx Easy IP App

Search and ﬁnd the Technaxx Easy IP App from the Apple Store for iOS or the

Google Play for Android. Then install it in your mobile device. Press the Easy IP

icon to start it.

Add Camera ( )

Press the Add Camera icon to add camera. Find the UID QR Code Label on the

camera body. Use the QR Code Reader to read the UID of camera.

Enter UID Password "888888" and name (customizable) the camera.

Product specificaties

Merk:	Technaxx
Categorie:	Bewakingscamera
Model:	TX-57
Kleur van het product:	Wit
Gewicht:	66.5 g
Breedte:	62 mm
Diepte:	65 mm
Hoogte:	49 mm
Soort:	IP-beveiligingscamera
Gebruikershandleiding:	Ja
Ondersteunde mobiele besturingssystemen:	Android, iOS
LED-indicatoren:	Ja
Type verpakking:	Doos
Wi-Fi-standaarden:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ondersteund audioformaat:	AAC, AC3
Ondersteunde videoformaten:	H.264, MP4
USB-poort:	Nee
Ondersteuning voor plaatsing:	Binnen
Connectiviteitstechnologie:	Draadloos
Frequentieband:	2.4 GHz
Montagewijze:	Muur
Ondersteunde video-modi:	1080p
Maximum resolutie:	1920 x 1080 Pixels
Videocompressieformaten:	H.264, MP4
Aantal cameras:	1
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSDHC
Nachtvisie:	Ja
LED-type:	IR
Inclusief AC-adapter:	Ja
Volledige HD:	Ja
Omvang optische sensor:	1/6 "
Type beeldsensor:	CMOS
Interface:	WLAN
Ingebouwde microfoon:	Ja
Ondersteunde grafische resoluties:	1920 x 1080 (HD 1080)
Netwerkstandaard:	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximaal 30 frames per seconde:	30 fps
HDD capaciteit:	32 GB
Power over Ethernet (PoE):	Nee
Maximum aperture number:	2.4
Infrarood (IR)-afsluitingsfilter:	Ja
Wifi:	Ja
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Lichtsensor:	Ja
Verwijderbare IR-filter:	Ja