Tascam CD-400U Handleiding

Tascam CD-spelers/recorder CD-400U

Lees hieronder de 📖 handleiding in het Nederlandse voor Tascam CD-400U (44 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/44

OPCD400UTEA02

CD-400U

CD / MEMORY PLAYER

OWNER'S MANUAL

2 TASCAM CD-400U

IMPORTANT SAFETY PRECAUTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the literature accompanying

the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are provid-

ed for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replace-

ment of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience recepta-

cles, and the point where they exit from the appara-

tus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table

specied by the manufacturer, or sold with the appa-

ratus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from

tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

• The apparatus draws nominal non-operating power

from the AC outlet with its POWER or STANDBY/ON

switch not in the ON position.

• The mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

• Caution should be taken when using earphones or

headphones with the product because excessive

sound pressure (volume) from earphones or head-

phones can cause hearing loss.

• If you are experiencing problems with this product,

contact TEAC for a service referral. Do not use the prod-

uct until it has been repaired.

CAUTION

• Do not expose this apparatus to drips or splashes.

• Do not place any objects filled with liquids, such as

vases, on the apparatus.

• Do not install this apparatus in a confined space

such as a book case or similar unit.

• The apparatus should be located close enough to

the AC outlet so that you can easily grasp the power

cord plug at any time.

• If the product uses batteries (including a battery

pack or installed batteries), they should not be

exposed to sunshine, fire or excessive heat.

• CAUTION for products that use replaceable lithium

batteries: there is danger of explosion if a battery is

replaced with an incorrect type of battery. Replace

only with the same or equivalent type.

WARNING

• Products with Class construction are equipped with !

a power supply cord that has a grounding plug. The

cord of such a product must be plugged into an AC

outlet that has a protective grounding connection.

IN USA/CANADA, USE ONLY ON 120 V SUPPLY.

TASCAM CD-400U 3

IMPORTANT SAFETY INSTRUCTIONS

RACK-MOUNTING THE UNIT

Use the supplied rack-mounting kit to mount the unit in a stan-

dard 19-inch rack, as shown below.

Remove the feet of the unit before mounting.

CAUTION

i Leave 1U of space above the unit for ventilation.

i Allow at least 10 cm (4 in) at the rear of the unit for ventila-

tion.

Laser information

This product contains a semiconductor laser system inside the

cabinet and is classified as a “CLASS 1 LASER PRODUCT”.

To prevent being exposed to the laser beam, do not try to open

the enclosure.

Notes on Laser Product

This product has been designed and manufactured according

to FDA regulations “title 21, CFR, chapter 1, subchapter J, based

on the Radiation Control for Health and Safety Act of 1968”,

and is classified as a class 1 laser product. There is no hazardous

invisible laser radiation during operation because invisible laser

radiation emitted inside of this product is completely confined

in the protective housings.

The label required in this regulation is shown at .1

For USA

CAUTION

i DO NOT REMOVE THE PR OTEC TIVE HOUSING USING A

SCREWDRIVER.

i USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

Optical pickup

Type: EP-C250L

Manufacturer: GUANGDONG EVER BRIGHT GROUP CO.,LTD

Laser output: Less than 0.30 mW on the objective lens

Wavelength: 792 +8 nm / −12 nm

CAUTIONS ABOUT BATTERIES

This product uses batteries. Misuse of batteries could cause a

leak, rupture or other trouble. Always abide by the following

precautions when using batteries.

• Never recharge non-rechargeable batteries. The batter-

ies could rupture or leak, causing fire or injury.

• When installing batteries, pay attention to the polarity

indications (plus/minus (+/–) orientation), and install

them correctly in the battery compartment as indicat-

ed. Putting them in backward could make the batteries

rupture or leak, causing fire, injury or stains around

them.

• When you store or dispose batteries, isolate their termi-

nals with insulation tape or something like that to pre-

vent them from contacting other batteries or metallic

objects.

• When throwing used batteries away, follow the dispos-

al instructions indicated on the batteries and the local

disposal laws.

• Do not use batteries other than those specified. Do not

mix and use new and old batteries or different types of

batteries together. The batteries could rupture or leak,

causing fire, injury or stains around them.

• Do not carry or store batteries together with small

metal objects. The batteries could short, causing leak,

rupture or other trouble.

• Do not heat or disassemble batteries. Do not put them

in fire or water. Batteries could rupture or leak, causing

fire, injury or stains around them.

• If the battery fluid leaks, wipe away any fluid on the

battery case before inserting new batteries. If the bat-

tery fluid gets in an eye, it could cause loss of eyesight.

If fluid does enter an eye, wash it out thoroughly with

clean water without rubbing the eye and then consult

a doctor immediately. If the fluid gets on a person’s

body or clothing, it could cause skin injuries or burns.

If this should happen, wash it off with clean water and

then consult a doctor immediately.

• The unit power should be off when you install and

replace batteries.

• Remove the batteries if you do not plan to use the unit

for a long time. Batteries could rupture or leak, causing

fire, injury or stains around them. If the battery fluid

leaks, wipe away any fluid on the battery compartment

before inserting new batteries.

• Do not disassemble a battery. The acid inside the bat-

tery could harm skin or clothing.

4 TASCAM CD-400U

IMPORTANT SAFETY INSTRUCTIONS

For European Customers

Disposal of electrical and electronic equipment and

batteries and/or accumulators

(a) All electrical/electronic equipment and waste batteries/

accumulators should be disposed of separately from the

municipal waste stream via collection facilities designated

by the government or local authorities.

(b) By disposing of electrical/electronic equipment and waste

batteries/accumulators correctly, you will help save valuable

resources and prevent any potential negative effects on

human health and the environment.

and batteries/accumulators can have serious effects on the

environment and human health because of the presence of

hazardous substances in the equipment.

(d) The Waste Electrical and Electronic Equipment

(WEEE) symbols, which show wheeled bins that have

been crossed out, indicate that electrical/electronic

equipment and batteries/accumulators must be col-

lected and disposed of separately from household

waste.

If a battery or accumulator contains more than the

specified values of lead (Pb), mercury (Hg), and/or

cadmium (Cd) as defined in the Battery Directive

(2006/66/EC), then the chemical symbols for those

elements will be indicated beneath the WEEE sym-

bol.

(e) Return and collection systems are available to end users. For

more detailed information about the disposal of old electri-

cal/electronic equipment and waste batteries/accumulators,

please contact your city office, waste disposal service or the

shop where you purchased the equipment.

Pb, Hg, Cd

For China

“仅适用于海拔 2000m 以下地区安全使用”

“仅适用于非熱帯气候条件下安全使用”

“环境保护使用年限”

产品有毒有害物质或元素的名称及含量

机种 : CD-400U 有毒有害物质或元素

品名铅

321start

汞

(Hg)

镉

(Cd)

六价铬

(Cr6+)

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

1 CHASSIS 部份 ○ ○ ○ ○ ○ ○

2 FRONT PANEL 部份 ○ ○ ○ ○ ○ ○

3 螺丝部份 ○ ○ ○ ○ ○ ○

4 线材部份 ○ ○ ○ ○ ○ ○

5 PCB Assy 部份 × ○ ○ ○ ○ ○

6 电源部份 ○ ○ ○ ○ ○ ○

7 附属品部份 × ○ ○ ○ ○ ○

8 LABEL 部份 ○ ○ ○ ○ ○ ○

9 包装部份 ○ ○ ○ ○ ○ ○

○ ：表示该有毒有害物质在该部件所有均质材料中的含有量均在 GB/T26572 标准规定的限量要求以下。

× ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572 标准规定的限量要求。

（针对现在代替技术困难的电子部品及合金中的铅 )

TASCAM CD-400U 5

Wireless equipment precautions

Compliance of radio transmitter and in-

terference

Model for USA

Declaration of Conformity

Responsible party: TEAC AMERICA, INC.

Address: 1834 Gage Road, Montebello, California,

U.S.A.

Telephone number: 1-323-726-0303

This device complies with Part.15 of FCC Rules. Operation is

subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

Labeling of authorization

FCC ID: XEG-CD400U

Model for Canada

Compliance of radio transmitter

This device complies with Industry Canada RSS-210 standard(s).

Operation is subject to the following two conditions:

1) This device may not cause interference

2) This device must accept any interference, including interfer-

ence that may cause undesired operation of the device.

Labeling of authorization

IC: 1559C-CD400U

Modèle pour le Canada

Conformité de l’émetteur radio

Ce dispositif est conforme à la norme CNR-210 d’Industrie

Canada applicable aux appareils radio exempts de licence. Son

fonctionnement est sujet aux deux conditions suivantes :

1) Le dispositif ne doit pas produire de brouillage préjudiciable,

2) Ce dispositif doit accepter tout brouillage reçu, y compris

un brouillage susceptible de provoquer un fonctionnement

indésirable.

Étiquetage d’autorisation

IC: 1559C-CD400U

Compliance of interference

This Class B digital apparatus complies with Canadian ICES-003.

This equipment complies with FCC/IC radiation exposure limits

set forth for an uncontrolled environment and meets the FCC

radio frequency (RF) Exposure Guidelines and RSS-102 of the IC

radio frequency (RF) Exposure rules. This equipment has very

low levels of RF energy that it deemed to comply without max-

imum permissive exposure evaluation (MPE). But it is desirable

that it should be installed and operated keeping the radiator

at least 20 cm or more away from person’s body (excluding

extremities: hands, wrists, feet and ankles).

Cet équipement est conforme aux limites d’exposition aux

rayonnements énoncées pour un environnement non con-

trôlé et respecte les règles les radioélectriques (RF) de la FCC

lignes directrices d’exposition et d’exposition aux fréquences

radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une

énergie RF très faible qui est considérée conforme sans évalua-

tion de l’exposition maximale autorisée. Cependant, cet équipe-

ment doit être installé et utilisé en gardant une distance de 20

cm ou plus entre le dispositif rayonnant et le corps (à l’exception

des extrémités : mains, poignets, pieds et chevilles).

Conformité de brouillage

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Marquage d’autorisation

CAN ICES-3(B)/NMB-3(B)

Model for EEA (European Economic Area)

This product has the function of broadband transmitter using

2.4GHz Band.

Use frequency range: 2400 MHz – 2480 MHz

Maximum output power: Bluetooth® Class 2 (less than 2.5 mW)

Hereby, TEAC Corporation declares that the radio

equipment type is in compliance with Directive

2014/53/EU., and the other Directives, and

Commission Regulations.

The full text of the EU declaration of conformity is available at

the following internet address: Please contact us by e-mail.

http://tascam.eu/en/kontakt.html

EU Importer: TEAC Europe GmbH

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

CAUTION

Authorization of wireless devices are different in countries or

regions. Please use only in the country where you purchased the

product.

0Depending on the country, restrictions on the use of Blue-

tooth wireless technology might exist.

Confirm the laws and regulations of the country or region where

you want to use the unit before use.

Radiation Exposure requirements

This equipment meets the regulation, which is recognized inter-

nationally, for the case of human exposure to radio waves gen-

erated by the transmitter.

Statement of compliance

Model for USA

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment and meets the FCC radio

frequency Exposure Guidelines.

Model for Canada

This equipment complies with IC RSS-102 radiation exposure

limits set forth for an uncontrolled environment.

Model for EEA (European Economic Area)

This equipment complies with EN.62311; Assessment of elec-

tronic and electrical equipment related to human exposure

restrictions for electromagnetic fields; the harmonised standard

of DIRECTIVE 2014/53/EU.

6 TASCAM CD-400U

Wireless equipment precautions

CAUTION

Changes or modifications not expressly approved by the

party responsible for compliance could void the user’s

authority to operate the equipment.

Information for interference

(FCC requirements)

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequen-

cy energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communi-

cations.

However, there is no guarantee that interference will not occur

in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures.

0Reorient or relocate the equipment and/or the receiving an-

tenna.

0Increase the separation between the equipment and receiver.

0Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

0Consult the dealer or an experienced radio/TV technician for

help.

Product specificaties

Merk:	Tascam
Categorie:	CD-spelers/recorder
Model:	CD-400U

Heb je hulp nodig?

Als je hulp nodig hebt met Tascam CD-400U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding CD-spelers/recorder Tascam

Tascam CD-A750 Handleiding

19 Juni 2023

Tascam CD-160 Handleiding

12 Juni 2023

Tascam CC-222SL Handleiding

5 Juni 2023

Tascam CD-VT2 Handleiding

16 Mei 2023

Tascam CD-X1700 Handleiding

2 Mei 2023

Tascam CD-D1x4 Handleiding

25 April 2023

Tascam CD-200 Handleiding

21 April 2023

Tascam CD-P1260 Handleiding

19 April 2023

Tascam CD-302 Handleiding

16 April 2023

Tascam CD-X1500 Handleiding

12 April 2023

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder

Proscan PRCD1025 Handleiding

10 Maart 2025

Proscan PCD300-BLACK Handleiding

4 Maart 2025

Gold Note CD-1000 MK II Handleiding

19 Februari 2025

Atoll DR100 Handleiding

19 Februari 2025

Atoll CD50 Handleiding

19 Februari 2025

AVM Evolution CD 3.2 MKII Handleiding

19 Februari 2025

AVM CD 30.3 Handleiding

19 Februari 2025

Atoll CD200 Handleiding

19 Februari 2025

Atoll CD100 Handleiding

19 Februari 2025

Naxa NPB-251 Handleiding

28 Januari 2025