Taga Harmony TAV-616F SE Handleiding

Taga Harmony Speaker TAV-616F SE

Lees hieronder de 📖 handleiding in het Nederlandse voor Taga Harmony TAV-616F SE (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
DIAMOND / PLATINUM SE / PLATINUM / PLATINUM SLIM /
AZURE / AUDIO-VIDEO / inMOVE Passive Speaker Series*
*and other series of passive speakers not listed.
Instruction Manual
Edition 12-2022
2
Introduction
Congratulations for purchasing TAGA Harmony speakers!
Our speakers provide the îš¿nest music and home theatre performance with wide dispersion and
spaciousness, deep bass and impressive dynamics, adding sonic accuracy, precise location and
ultra-low distortions. Utilizing advanced materials, state of the art engineering and innovative
design by an international team of professional designers position TAGA Harmony as one of the
leaders in the audio industry.
Thanks to unique technology, used to build our speakers and the true passion of our designers
TAGA Harmony is setting the standard for sonic excellence and offers the best value in sound
performance.
Whether you enjoy your favorite music or movie TAGA Harmony speakers always deliver the
high-end sound with striking clarity and spaciousness as well as dynamic low bass at any volume
levels.
CABINET CARE
Great care and craftsmanship has gone into the construction and îš¿nish of the cabinet. Periodically
use a soft, dry cloth to remove dust or îš¿ngerprints. Do not use strong chemical cleaners, paper
towels or other abrasive materials as it may damage the îš¿nish.
IMPORTANT REMARKS
Please read this instruction manual carefully before installation and keep it for future reference.
• If not clearly specied otherwise in the product specications (available on the
www.tagaharmony.com website), this speaker is intended for indoor use only.
• Please do not dismantle any parts of the speakers as this may void your warranty – servicing
should be done only by a qualiîš¿ed TAGA Harmony repair center.
• During connecting the speakers make sure to power off your amplier(receiver) or other
source.
• Make sure that all connections are done according to this manual and a manual provided with
your ampliîš¿er(receiver).
• Make sure that your amplier(receiver) has suitable output power and a working impedance
compatible with the speakers. Using an unsuitable ampliîš¿er(receiver) may damage the
speakers and/or ampliîš¿er(receiver) and may void your warranty. The speakers may be
damaged by too powerful ampliîš¿er(receiver) [too high output power] as well as by an
underpowered ampliîš¿er(receiver) [distortions of sound].
• Do not use high volume levels for a long time – this may damage the speakers and void your
warranty.
• When switching on and off your amplier(receiver), turn down the volume to avoid strong
electrical impact to be delivered to the speakers.
• Avoid positioning the speakers too near to a traditional TV set – these speakers are not
magnetically shielded.
• Position the speakers in ventilated and dry atmosphere and do not expose them to sun or
other heat sources.
• Position the speakers on a stable and hard surface.
• Make sure to avoid short-circuit of + and - speaker terminals : this may damage the speakers
and/or ampliîš¿er (receiver) and may void your warranty.
• When the speakers are not operating, cover them with protective grills (if supplied).
• As safety precautions to avoid tip-over of speakers we recommend to anchor them to the wall
or other permanent construction.
Note! Wall anchoring devices have to be purchased separately and are not delivered with
your speaker.
SPECIFICATIONS
Full technical speciîš¿cations are available on the www.TagaHarmony.com website.
3
Contents
Unpacking the speakers 3
Placement 6
Wall-Mounting of Satellite (S), Surround (S), Center (C),
LCR and LCRS speakers 9
Hooking up the wires 9
Final adjustments 11
Unpacking the speakers
If you notice any damages in transportation, report it immediately to your dealer.
Keep the speaker carton for future use.
Depending on the model, the packaging (carton) may contain one or more speakers and be
opened from the bottom or from the side.
Note! For detailed information about number of speakers refer to the information on the packaging.
Floorstanding (tower) Speakers (F):
Most oorstanding speakers are supplied with spikes - depending on the series and model the
spikes may be packed in the same packaging as the speakers or separately.
Depending on the series and model the speakers may be provided with factory bases (plinths) or
feet and additional accessories for installing them.
Note! The installation instruction for bases (plinths) or feet may be provided separately -
usually in the box with the bases (plinths) or feet.
Note! Some accessories may be packed with the speakers and some with the bases (plinths) or
feet. Check with your local dealer for more details.
When unpacking your speakers you can choose one of two installation options:
1) 2) with the base(plinth) or feet and spikes or with the spikes only.
If your speaker is provided with the the base(plinth) or feet TAGA Harmony recommends the îš¿rst
option.
1. BASE(PLINTH) / FEET with SPIKES [refer to a separate installation instruction]
Packaging opened from the bottom
To prevent damage to the speaker, install the base(plinth) / feet and the spikes while the speaker is
still in the carton.
PACKAGING WARNING
The packaging may contain elements such as plastic, that should be kept away from small
children.
The thin foil or small elements can stick to the nose and mouth, or may be swallowed and
prevent breathing.


Product specificaties

Merk: Taga Harmony
Categorie: Speaker
Model: TAV-616F SE

Heb je hulp nodig?

Als je hulp nodig hebt met Taga Harmony TAV-616F SE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Taga Harmony

Handleiding Speaker

Nieuwste handleidingen voor Speaker