Swann SWVID-PENBL4 Handleiding

Swann Bewakingscamera SWVID-PENBL4

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann SWVID-PENBL4 (8 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

IMPORTANT NOTE: Prohibition against eavesdropping

All jurisdictions have specic laws and regulations relating to the use of cameras.

Before using any camera for any purpose, it is the buyer’s responsibility to be aware

of all applicable laws and regulations that prohibit or limit the use of cameras and to

comply with the applicable laws and regulations.

Warnings:

• Modications not approved by the party responsible for compliance could void

user’s authority to operate the equipment.

• PenCam recorder

• Operating Instructions

• Ink Rell

Before You Begin

Package Contents

Layout of the Pencam

Blue / Orange

Status LED

Reset Button

Hidden

Camera

Hidden USB Port

(Twist to reveal)

Working

Pen Tip Power/Record

button

USB Connection

The USB port and mode

selection switch are concealed

inside the PenCam.

To access them, you need to

hold one end of the pen and

twist the other end counter-

clockwise until the two parts

separate.

Mode

Select Switch

Picture

mode

Video

mode

Turning the PenCam On

• Press the power/record button (on top o the pen) and hold until the both the

orange and blue lights turn on then release it. When the camera is ready to use

the orange standby light will stay on and the blue light will turn o.

• The orange light will blink when it is on standby in picture mode or stay lit when

it is on standby in video mode.

Turning the PenCam O

• Leave the Pencam in standby mode and it will automatically turn o after 60

seconds of inactivity

• The PenCam will not switch o while it is actually recording.

• If the PenCam is recording you must press the button once to stop recording and

return to standby (static orange light) then leave the camera for 60 seconds until

the orange light turns o indicating that the Pencam has turned o automatically.

Operating the Pencam

Switching between Video and Picture

To switch between Video and Picture mode,

unscrew the PenCam to reveal the USB

connector. Using the tip of a pen or ngernail,

move the selection switch (pictured) to the

right for PICTURE or left for VIDEO.

Charging the PenCam

The PenCam has a built in lithium-ion battery that provides approximately 45

minutes of power when fully charged.

Charge the PenCam by connecting the hidden USB connector inside the PenCam to

a USB port on your computer. The status LED will slowly ash orange while charging.

Full charge time is approximately 90 minutes. The PenCam will stop ashing when it

is fully charged.

IMPORTANT NOTE: Before using the PenCam for the rst time, connect it to a USB

port and charge it fully. The PenCam will not function as a camera while it is plugged

into the USB port.

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	SWVID-PENBL4
Kleur van het product:	Blauw
Gewicht:	30 g
Breedte:	150 mm
Diepte:	15 mm
Hoogte:	15 mm
Ondersteunde videoformaten:	AVI
Vormfactor:	Verborgen
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Maximum resolutie:	1600 x 1200 Pixels
Minimale belichting:	- Lux
Ingebouwde HDD:	Nee
Nachtvisie:	Nee
Optische zoom:	- x
Intern geheugen:	4096 MB
Ondersteunde grafische resoluties:	1280 x 720 (HD 720), 1600 x 1200 (UXGA)
Power over Ethernet (PoE):	Nee
Wifi:	Nee