Swann SWPRO-3MPMSDPK2 Handleiding

Swann Bewakingscamera SWPRO-3MPMSDPK2

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann SWPRO-3MPMSDPK2 (3 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

M3MPMSDVER1E | © Swann 2017

Helpdesk & Technical Support

Technical Support E-mail: tech@swann.com

Technical Support Website: support.swann.com

Telephone Helpdesk

USA Toll Free 1-800-627-2799

USA Parts & Warranty 1-800-627-2799

(M-F, 9am-5pm US PT)

AUSTRALIA 1800 788 210

NEW ZEALAND Toll Free 0800 479 266

UK 0808 168 9031

Swann Communications warrants this product against defects in workmanship and material for a period of

one (1) year from its original purchase date. You must present your receipt as proof of purchase for warranty

validation. Any unit which proves defective during the stated period will be repaired without charge for parts or

labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred

to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when

shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use of or

the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman

or other person or any other costs associated with its use are the responsibility of the end user. This warranty

applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end

user or third party modifications to any component will render all warranties void. By law some countries do not

allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal

rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be

of acceptable quality.

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) These devices may not cause harmful interference.

(2) These devices must accept any interference received, including interference that may cause undesired op-

eration.

Thermal-Sensing

Security Camera

Motion & Heat-Activated Super HD Dome Camera

EN INSTRUCTION MANUAL

Security Made Smarter

Limited Warranty - Terms & Conditions

FCC Verification6

Introduction

Congratulations on the purchase of your Swann Su-

per HD Dome Camera.

• Enjoy day & night protection with the latest

thermal-sensing security & have a bird’s eye

view of your premises in crystal clear super HD

• See what’s happening in any light with infrared

cut filter & powerful LEDs producing night vi-

sion up to 100ft/30m & a wide 70° viewing angle

• State-of-the-art True Detect™ PIR motion sen-

sor is designed for security applications with

the ability to reliably detect people, cars, large

pets & other heat-generating large objects

• With discreet dome styling & sturdy aluminium

construction, the camera suits indoor & out-

door applications with an IP66 rating for any

weather conditions & cable threaded through

the mounting bracket for added protection

Important instructions

1. Make sure the camera is fixed correctly and stable

if fastened in place.

2. Only use the supplied power adapter (12V) and

power splitter (if supplied).

3. Do not operate if wires and terminals are exposed.

Please note: Have a look at the camera location tips

included with your DVR, to select the best location for

your camera (the camera location tips provided here

are for general purpose only).

Important note: All jurisdictions have specific laws

and regulations relating to the use of cameras. Be-

fore using any camera for any purpose, it is the buy-

er’s responsibility to be aware of all applicable laws

and regulations that prohibit or limit the use of cam-

eras.

The camera can be mounted onto a flat vertical or horizontal surface

and must be of sufficient strength to hold the camera.

→ Hold the dome enclosure and the dome ring then rotate (1) (2)

the mounting bracket clockwise to remove it from the (3)

camera.

→ Position the camera bracket in the location you want to (4)

mount it, and mark the mounting holes on the surface to

position the screws (a mounting template has been included).

→ Using the appropriate screws for the surface you are mounting

to, secure the bracket in place.

→ Run the cable then place the camera into the dome enclosure

and dome ring and aim the camera to the desired position. The

camera can be rotated left or right or up and down. Check the

image on your DVR and make adjustments as necessary.

→ After you’ve finished adjusting the viewing position, rotate the

dome ring to the mounting bracket counter clockwise to lock

the position in place.

1. Take into consideration what you want to monitor

and where you’ll get the best view of it.

2. How you’re going to connect the camera to your

monitoring system; remember that cables and

connections should be kept out of the weather.

3. How to keep the camera out of harm’s way. It’s

recommended to mount your camera at an elevated

position.

4. Place your camera as close to the area of interest

as practicable. The best position is from about

13ft/4m above looking slightly down, keeping in mind

the details you are looking for.

5. Although the sky looks nice when you look at the

live view from your camera, it is an unlikely direction

for an offender to approach. Make sure your camera

has minimal sky in it as the light in daylight can make

the foreground of the image darker.

6. Think about the most likely way a potential offender

may approach your home, use your camera to give

you the best coverage of these areas.

7. The camera’s casing is resistant to different

weather conditions and tampering. It would take an

overwhelming event to damage the housing.

8. Even though the camera is weather and water-

resistant, prolonged exposure to adverse weather

conditions such as sunlight or excessive moisture,

may eventually damage the internal components of

the camera and adversely affect its performance.

9. Run cables inside a wall cavity or other protected

enclosure, and ensure that all wiring and connectors

are insulated and protected from moisture.

10. Don’t put your cable near live electrical wiring.

AC electricity generates radio “noise” which can

interfere with the signal from your camera.

1. Connect the video output and

power input connections on the

camera to the corresponding

connections on the supplied video &

power cable.

2. Connect the supplied power

splitter to the power input on the

video & power cable (repeat this step

if multiple cameras are included).

3. Connect the supplied power

adapter to the other end of the power

splitter then connect the power

adapter to a spare wall socket.

4. Connect the video output on the

video & power cable to an available

camera input on your DVR. Twist the

connection to lock it in place.

1 Connecting the Camera

Mounting the Camera3 Camera Location Tips4

For single camera packs, connect the supplied power adapter

directly to the power input on the video & power cable.

2 3

Power Input

Video Output

Twist to lock

connectors

Video Input

Video & Power Cable

Connect this to your DVR

Power Splitter

connects here

Power Output

Power Adapter

connects here

Power Splitter

Power Adapter

Video & Power Cable

connects here

Connect to a spare

power outlet

LANLAN

VGAVGA

7 5 3 1

8 6 4 2

VIDEO INPUTVIDEO INPUT AUDIO

OUT PUT

AUDIO

OUT PUT

AUDIO

INPUT

AUDIO

INPUT

3 1

4 2

12V12V

RS485RS485

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	SWPRO-3MPMSDPK2
Kleur van het product:	Wit
Hoogte:	100 mm
Soort:	CCTV-bewakingscamera
Materiaal behuizing:	Aluminium
Internationale veiligheidscode (IP):	IP66
Gebruiksaanwijzing:	Ja
Bluetooth:	Nee
Montage gereedschap:	Ja
Vormfactor:	Dome
Ondersteuning voor plaatsing:	Buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond
Maximum resolutie:	2048 x 1536 Pixels
Totaal aantal megapixels:	3 MP
Diameter:	100 mm
Minimale belichting:	- Lux
Field of view (FOV) hoek:	64 °
Aantal cameras:	2
Meegeleverde kabels:	BNC
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
Inclusief AC-adapter:	Ja
Interface:	BNC
Ingebouwde microfoon:	Nee
Power over Ethernet (PoE):	Nee
Dag/nacht modus:	Ja
Bewegingssensor:	Ja
Weerbestendig:	Ja
Nachtkijker afstand:	30 m
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-20 - 50 °C
Bewegingssensortechnologie:	Passieve infraroodsensor (PIR)
Waarschuwingsstickers:	Ja
Bewegingssensor afstand:	10 m