Swann SWNVW-470CAM Handleiding

Swann Bewakingscamera SWNVW-470CAM

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann SWNVW-470CAM (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

1 2 3

4 5 6

7 8 9

SwannSecure

Quick Start Guide

Welcome!

Lets get started.

Congratulations on the purchase of your SwannSecure device. This quick start guide will

assist you with getting your device up and running as soon as possible. We recommend that

you connect everything and give it a try before you do a permanent installation, to make sure

nothing was damaged during shipping. On the other side of this guide is a detailed connection

map which illustrates the various connections available.

A) LAN - Connect this to your home network.

B) Reset - If the device becomes unrespon-

sive, use a paperclip to reset.

C) Audio Out - For connecting headphones or

speakers.

D) USB - Connect the mini USB cable here. This

is used to update the firmware when available.

E) HDMI - If you have a digital TV with HDMI

input, connect this to an available input.

F) Power - This is where you connect the power

adapter. When connected, the internal battery

will start charging.

QH470KIT191213E | © Swann 2014

AGetting to know your device

BStep One CStep Two

DStep Three EConnecting to your HDTV (optional) FConnect to your Home Network

A B C D E F

L M

G) Screw Mount - Use the provided

screws to mount the device to the

wall.

H) Power LED - The power LED will

turn red when the device is powered

with the power supply.

I) Power Button - Press and hold

this button until the device turns

on. Press and hold to bring up the

shutdown menu.

J) Micro-SD Card Slot - Insert the

provided Micro-SD card into this slot.

K) Speaker - Audio transmitted from

the camera will be heard from here.

L) Microphone - The microphone

does not function on this model.

M) Menu Button - Press this button

to access the on-screen menu. You

will see a blue light when the button

is pressed.

N) Wi-Fi Antenna - Adjust the

antenna so they are placed vertically.

O) Stand - Pull out the stand until it

clicks into place.

P) Microphone - Allows the camera

to hear nearby sounds and stream

them with the video.

Q) Stand - The included Wi-Fi

antenna connects here.

Peel off the plastic cover that is protecting

the LCD display. Connect the DC 5V power supply to the

power input on the device. There will be

a label on each power supply denoting

which end is plugged into what device.

Connect the power

connection on the

camera to the power

extension cable.

Connect the DC 12V

power supply to the

other end of the power

extension cable.

LAN

Reset Button

Screw the included

Wi-Fi antenna

clockwise to the gold

coloured connection

on the camera.

Continue until it is

securely fastened.

HDMI IN 2/MHL

HDMI IN 1(DVI)

Connect the mini

HDMI cable (supplied)

to the HDMI input

on the device, and

connect the other

end to a spare HDMI

input on the TV.

U SB Inte rnet Et he rnet

432

An Ethernet connection is required

for Internet access when the device

is in AP mode (see Setup Wizard

for more information). Connect

the Ethernet cable (supplied) to

the LAN connection on the device,

and then connect the other end to

a spare port on your router.

You’re now ready to run through “The Setup Wizard”.

The LAN connection is mainly used for configuration to your Wi-Fi network.

FCC warning: The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This

equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

10 11 12

13 14 15

16 17 18

Welcome!

Lets get started.

QH48_1550H181013E | © Swann 2013

Connect the mini HDMI cable (supplied)

to the HDMI input on the device, and

connect the other end to a spare HDMI

input on the TV.

Insert the provided Micro-SD

card into the TF slot, which is

located next to the power but-

ton, until it clicks into place.

Connect the power connection on the

camera to the power extension cable.

Connect the DC 12V power supply to the

other end of the power extension cable.

QH470KIT191213E | © Swann 2014

Peel off the plastic cover

that is protecting the LCD

display.

US B In ter ne t Et her ne t

432

HDMI IN 2/MHL

HDMI IN 1(DVI)

Connect the DC 5V power supply to the

power input on the device. There will be

a label on each power supply denoting

which end is plugged into what device.

An Ethernet connection is required for

Internet access when the device is in AP mode

(see Setup Wizard for more information).

Connect the Ethernet cable (supplied) to

the LAN connection on the device, and then

connect the other end to a spare port on your

router.

Connect the mini USB cable here.

This is used to update the firmware

when available.

Reset Button

LAN

What are the additional connections for?

Reset - If the device becomes unresponsive,

use a paperclip to reset.

Audio Out - For connecting headphones or

speakers.

Adjust the antenna

so they are placed

vertically.

The LAN connection is mainly used for

configuration to your Wi-Fi network.

FCC warning: The transmitter must not be co-

located or operated in conjunction with any other

antenna or transmitter. This equipment complies

with the FCC RF radiation exposure limits set forth

for an uncontrolled environment. This equipment

should be installed and operated with a minimum

distance of 20cm between the radiator and any part

of your body.

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	SWNVW-470CAM
Kleur van het product:	Wit
Gewicht:	350 g
Breedte:	60 mm
Diepte:	95 mm
Hoogte:	165 mm
Soort:	IP-beveiligingscamera
Vormfactor:	Rond
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad en draadloos
Ethernet LAN:	Ja
Montagewijze:	Plafond/muur
Maximum resolutie:	1280 x 720 Pixels
Totaal aantal megapixels:	1 MP
Minimale belichting:	0 Lux
Field of view (FOV) hoek:	65 °
Meegeleverde kabels:	UTP
Nachtvisie:	Ja
Inclusief AC-adapter:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Type beeldsensor:	CMOS
Snelle installatiehandleiding:	Ja
Nachtkijker afstand:	15 m
Aantal verlichtingen LEDS:	36
Wifi:	Ja