Swann SW231-SCK Handleiding

Swann Bewakingscamera SW231-SCK

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann SW231-SCK (8 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

D 12V

D 12

12V

12 3

4 L

English

If this device does not work when you first plug it

in, do not take it back to the store.

Safety Camera Kit

Wireless Camera & Receiver

Contact the Swann Helpdesk using our fast e-mail service

tech@swann.com.au or call us on one of the Toll-Free

numbers shown on the back cover of this booklet.

Installation Guide

FCC INFORMATION

This device complies with Part15 of the FCC Rules. Operation is subject to the following two

conditions:

( ) This device may cause harmful interference,1

( ) This device must accept any interference received, including interference that may cause 2

undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

The Swann Safety Camera Kit allows you to wirelessly transmit pictures and

sound with ease. As the radio waves it uses have a frequency of 2.4GHz, they

can be received within a radius of up to 160 The Safety

Camera Kit Receiver works with other Swann wireless cameras to allow you to

have the option of using different frequencies for different locations and conditions

to ensure that you have the best possible image quality for your situation.

ft/50m in open line of sight.

Please note: The Swann Safety Camera Kit broadcasts video in the public

domain. The video signal is not encrypted and could potentially be viewed by

anyone with a similar 2.4GHz receiver unit. Please keep this in mind when

positioning and using any wireless camera equipment.

• Safety Camera with built in 2.4GHz Transmitter and Stand

• 4 channel 2.4GHz Receiver

• Antenna for Receiver

• 2 x Mains Power Adaptor (1 for use with Camera and 1 for Receiver)

• RCA A/V Cable

• Manual & Accessories

• Focus Tool

• Dip Switch Tool

If any of these items are missing, please contact your retailer.

Introduction

Package Contents

NOTE:

All jurisdictions have specific laws and regulations relating to the use of cameras.

Before using any camera for any purpose, it is the buyer’s responsibility to be

aware of all applicable laws and regulations that prohibit or limit the use of

cameras and to comply with the applicable laws and regulations.

The legality of watching people other than yourself changes from country to

country and even state to state. Contact your local government's privacy

information body or your local Police for more information on what if any

restrictions you may face.

WARNING - IMPORTANT SAFETY INSTRUCTIONS

To reduce fire or shock hazard do not expose the unit or adapters to rain or moisture

Do not handle damaged or leaking Lithium-Ion batteries

Do not use if any of the terminals or wires are exposed

Use only the power adapter that is included in this pack in an upright or vertical position

Any modifications not approved by Swann Communications PTY LTD. may void the user’s

ability to operate this product

The Camera features an omni-directional antenna which is most effective when used

in the UPRIGHT position.

1) Connect both the Camera and the Receiver to their respective power adaptors.

2) Connect the Receiver to the equipment you wish to view the camera on (monitor,

AV TV, VCR, DVR etc) using the supplied RCA A/V-cable. If you have an A/V TV

with RCA sockets you will need to switch the TV to the AV channel to view the

camera. To connect the Receiver to your VCR, you will need to turn the VCR to

the AV Input selection and turn your TV onto the channel you would normally use

to view a tape or movie on your VCR. The AV channel may be activated by a

button on your remote that is marked with this symbol , or L1 or L2 or

possibly AV, AV1 or AV2. Check the manual of your TV or VCR for more

information on using its AV inputs.

3) After connecting both the Camera and the Receiver make sure the receiver is

switched to the same channel as the camera. Press the Channel Select button

on the receiver until the LED is lit. Obtain the best picture by adjusting the

position of the Camera and Receiver unit to suit. Try slightly different locations of

either unit for optimum results.

Camera with Stand and Hood

Camera Power Adaptor

Setting up your system

DVR or MONITOR

With RCA Sockets

VD I E

AUD O

Receiver

Power Adaptor

CH4

Receiver

RCA A/V Cable

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	SW231-SCK
Gewicht:	20 g
Stroomvoorziening:	DC 12V
Maximum resolutie:	628 x 582 Pixels
Minimale belichting:	0 Lux
Nachtvisie:	Nee
Brandpuntbereik:	0 - 4 mm
Omvang optische sensor:	1/3 "
Type beeldsensor:	CMOS
Camera sluitertijd:	1/50 - 1/15000 s
Signaal/ruis-verhouding:	48 dB
Power over Ethernet (PoE):	Nee
Afmetingen (B x D x H):	28 x 30 x 28 mm
Bedrijfstemperatuur (T-T):	-10 - 50 °C