Swann SW211-HTY Handleiding

Swann Bewakingscamera SW211-HTY

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann SW211-HTY (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Swann Communications warrants this product against defects in workmanship and material

for a period of one ( ) year from it’s original purchase date. You must present your receipt as 1

proof of date of purchase for warranty validation. Any unit which proves defective during the

stated period will be repaired without charge for parts or labour, or replaced at the sole

discretion of Swann. The repair or replacement will be warranted for either ninety days or

the remainder of the original one year warranty period, whichever is longer. The end user is

responsible for all freight charges incurred to send the to Swann’s repair centres.

shipping from and to any country

other than the country of origin. The warranty does not cover any incidental, accidental or

consequential damages arising from the use of, or the inability to use this . Any costs

associated with the fitting or removal of this product by a tradesman or other person, or any

other costs associated with its use are the responsibility of the end user. This warranty applies

to the original purchaser of the only, and is not transferrable to any third party.

Unauthorised end user or third party modifications to any component or evidence of misuse

or abuse of the device will render all warranties void.

product The

end user is responsible for all shipping costs incurred when

product

Help Desk / Support Details

StyleCam

Security Camera

with Night Vision

If this device does not work when you first plug it in,

do not take it back to the store.

Installation Guide

Warranty Information

www.swannsecurity.com

English

All Countries E-mail: tech@swann.com.au

Telephone Helpdesk

UNITED STATES toll free

877-274-3695

(Sun-Thurs, 2pm-10.30pm PST)

800-627-2799

(Mon-Fri, 9am-1pm PST)

USA Exchange & Returns

562-777-2551

(Mon-Fri, 9am-4pm PST)

AUSTRALIA toll free

1300 13 8324

(Mon-Fri, 9am-5.30pm Aus EST)

International

+61 3 8412 4610

(Mon-Fri, 9am-5.30pm Aus EST)

See http://www.worldtimeserver.com for information on different time

zones and the time in Melbourne Australia compared to your local time.

Contact the Swann Helpdesk using our fast e-mail service

tech@swann.com.au or call us on one of the Toll-Free

numbers shown on the back cover of this booklet.

Most problems can be quickly and easily fixed with a simple

e-mail or a quick chat with one of our friendly technical staff.

(Toll-Free available in the US and Australia only)

FCC NOTICE

This device complies with Part 15 of FCC Rules.

Operation is subject to the following conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

Including interference that may cause undesired operation.

The StyleCam camera is designed for use with any TV, VCR, Security Monitor or computer with a video

capture card. The camera has a visual image and can be used indoors or in a sheltered position outside. The

StyleCam can be used for a variety of purposes including monitoring callers at the door, keeping

your car, yard, shop or warehouse under observation or used as a camera to monitor your baby.

camera

1. Camera with Stand with lead and 18m extension cable

2. DC Power Adaptor (adaptor design varies depending on country)

1. Once you have chosen the best position for the camera, switch the power to the

camera off, and unplug the power lead from the camera.

2. When mounting the StyleCam camera to your ceiling or wall, please ensure that

you rotate the camera so that at the top of the camera lens is ‘up’, otherwise you

will find that your pictures are displayed upside down. (see diagram)

3. Hold the camera base in the position you wish to fix it, and mark the holes with an

appropriate pen or pencil. Once this is done, remove the stand and drill a hole

with the appropriate drill bit for the material you are mounting your camera to and

the screws or fasteners you are using.

4. Run the camera cable back to the TV/VCR, any holes that you drill need to be at

least / ” (14mm) in diameter to allow the connectors to pass through.

5. Reconnect the power lead to the camera and switch the camera power back on.

6. Position the camera and firmly lock the stand into place. Do not over tighten or

forcefully adjust the camera once it has been correctly positioned.

1 2

Your StyleCam security is designed to transmit high quality color images during daylight and B&W

images at night to your television or recording device. To help guide you through the process of setting up the

StyleCam , we have outlined the steps and numbered each of the components required in the diagram

below.

camera

* To extend the operating distance from your TV or VCR use the 18m cable included or for more length purchase

an A/V extension cable (sold separately) which are available at most electronics stores.

Note: We do not recommend extending the cable length past 100 metres where loss of signal may occur.

Multiple cable sections connected to make up one cable length will drastically reduce the video signal distance.

330 Feet/

YELLOW

VCR, TV or MONITOR

I E

VD O

OID

V E

DA O

AIO

VIDEO IN 2

BLACK

POWER

CONNECTOR

CAMERA

POWER

ADAPTOR

Step 1: At the end of your StyleCam camera cable or extension cable you will find two colored plugs:

•Yellow (Video RCA)

•Black (DC Power)

Step 2: yellow "Video In"Plug the RCA plug (1) into the input (2) (usually located at the back of your TV

or VCR).

Step 3: black black power Connect the plug (3) at the end of the cable into the plug at the end of the

adaptor (4).

Step 4: power adaptorPlug the (5) into an outlet or power point in your wall.

Step 5: A/V TV TV AVIf you have an with RCA sockets you will need to switch the to the channel on

your to view the camera. To connect the StyleCam camera to your , you will need to turn TV VCR

the to the selection and turn your onto the channel you would normally use VCR A/V Input TV

to view a tape or movie on your . This channel may be activated by a button on your remote VCR

that is sometimes marked with this symbol , or or or possibly L1L2 AV AV21 or .

Note: The StyleCam will automatically turn on the Infra-Red LEDs when available light is too low to

support a clear picture.

Note: instructions VCR TVPlease read the for your or for more information on using their

A/V inputs.

Installation Instructions

Contents and Parts Identification

How to connect StyleCam camera to your TV or VCR

Mounting the camera on your wall or ceiling

1 2

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	SW211-HTY
Gewicht:	125 g
Stroomvoorziening:	DC 12V
Maximum resolutie:	628 x 582 Pixels
Minimale belichting:	0 Lux
Nachtvisie:	Ja
Infrarood wavelength:	850 nm
Brandpuntbereik:	0 - 6 mm
Omvang optische sensor:	1/3 "
Type beeldsensor:	CMOS
Camera sluitertijd:	1/50 - 1/15000 s
Signaal/ruis-verhouding:	48 dB
Power over Ethernet (PoE):	Nee
Afmetingen (B x D x H):	108 x 69 x 44 mm
Bedrijfstemperatuur (T-T):	0 - 45 °C