Swann SW111-WIP Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Swann SW111-WIP (24 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
IP-3G ConnectCam 1000â„¢
Wireless Network Camera
SW111-WIP
SW211-WIP
USER MANUAL
Version 1.0
- 1 -
Contents
Introduction..........................................................................2
Installation ...........................................................................3
Using Ultra View ..................................................................6
To launch the program.....................................................6
Item features....................................................................7
To add a camera............................................................12
To remove a camera......................................................15
To link to the Web page of the camera..........................15
To record video..............................................................16
To configure the recording settings ...............................18
To playback the recorded video.....................................20
To set up motion detection options................................21
Information.....................................................................23
- 2 -
I NTRODUCTION
This Software User Guide provides detailed instructions on
operating Ultra View, a customized software application with a
user-friendly interface allowing you to access and control your
camera(s). You can connect up to 16 cameras to monitor different
places and record events for each camera. With Ultra View, you
can also change some basic settings of the camera, such as
schedule profiles and motion detecting. In addition, if your camera
supports advanced features, such as audio or pan/tilt function,
you can use these functions through the control panels of Ultra
View.
To use Ultra View, you must install it on to your computer. It is
recommended to use a high performance computer if you want to
connect multiple cameras simultaneously. The following provides
suggested system requirements:
Platform: Microsoft® Windows® 2000/XP/Vista.
Hardware Requirement:
1 camera connected: Intel Pentium III 800MHz; 512MB RAM
2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB
RAM
5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM
9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB
RAM
Resolution: 1024x768 or above
NOTE When you use Ultra View to record video clips, store the
recorded files to an exclusive hard disk drive in your
computer to ensure there will be sufficient storage space.


Product specificaties

Merk: Swann
Categorie: Bewakingscamera
Model: SW111-WIP
Gewicht: 164 g
Stroomvoorziening: DC 5V
Ondersteunde videoformaten: MPEG4
Maximum resolutie: 640 x 480 Pixels
Minimale belichting: 0.5 Lux
Nachtvisie: Ja
LED-type: IR
Infrarood wavelength: 850 nm
Aantal Ethernet LAN (RJ-45)-poorten: 1
Omvang optische sensor: 1/4 "
Type beeldsensor: CMOS
Ingebouwde microfoon: Ja
Voldoet aan industriestandaarden: IEEE 802.11b,IEEE 802.11g
Ondersteunde beveiligingsalgoritmen: WPA-PSK,WPA2-PSK
Aansluitingen: USB 1.1
Maximaal 30 frames per seconde: 30 fps
Compatibele besturingssystemen: Windows 2000 / XP / Vista
Ondersteunde netwerkprotocollen: HTTP, FTP, TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, PPPoE, UPnP, RTP, RTSP, RTCP
Netwerkfuncties: Fast Ethernet
Power over Ethernet (PoE): Nee
Minimale processor: Pentium 4 1GHz
Afmetingen (B x D x H): 73 x 55 x 98 mm
Minimale RAM: 512 MB
Overdrachtssnelheid: 10 Mbit/s
Wifi: Ja
Bedrijfstemperatuur (T-T): 0 - 45 °C
Kijkhoek lens, horizontaal: 60 °
Kijkhoek lens, verticaal: 60 °

Heb je hulp nodig?

Als je hulp nodig hebt met Swann SW111-WIP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Swann

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera