Swann Pro-981 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Swann Pro-981 (24 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D’UTILISATION
EN
ES
FR
MVFDCAM150514T
Ultimate
Optical Zoom
Dome Camera
Dome / DΓ΄me / Domo
1
ENGLISH
About the Camera
Congratulations on your purchase of this PRO-CAM from ! You’ve chosen well; we Swann
think this is one of the finest vari-focal CCTV video cameras available. The adjustable lens
and on-screen menu system make the PRO-CAM ideal for monitoring any kind of space
in almost any lighting conditions... even no light at all, as it can see up to 30m/100ft in
complete darkness!
Our two cents: you’ve spent the money on a great camera. It’s worth spending a bit of time
making sure it’s set up right. This manual will take you through what you need to do to get
the camera delivering high quality images, and will let you know a little about how you can
tweak it further.
The Process: An Overview
1. Choose a spot for your camera. This will be influenced by what you need to monitor,
the places nearby which could support a camera, the lighting conditions of the
environment and so on (see section Mounting the Camera).
2. Connect the camera to a monitor. We suggest connecting it directly to a monitor during
setup, and to your DVR (or other recording device) afterwards. Having a monitor on
hand in the same location as the camera is a real time saver during setup.
3. Set the zoom. This will set the viewing angle of the lens, which determines how much
the camera can view (see section Adjusting Zoom and Focus).
4. Set the focus. This will allow you to choose which parts of what the camera can view is
in focus (see section Adjusting Zoom and Focus).
5. Connect the camera to your DVR or other recording/monitoring device (see section
Connection Guide).
6. Problem viewing images from your camera? Have a look at some of the solutions in
the Troubleshooting section to troubleshoot and fix the problem. Technical support for
your camera is also available to you via telephone and e-mail (see section Technical
Support Details).
Choosing a Location
The PRO-CAM is very flexible, and can be installed practically anywhere. Some of the
things you’ll have to consider when choosing a location are:
β€’ What you want to monitor, and where you’ll get the best view of it.
β€’ How you’re going to connect the camera to your monitoring system.
β€’ How to keep the camera out of harm’s way. Up high in protected corners is a good
option.
2
ENGLISH
Mounting the Camera
To mount the camera, use the supplied mounting hardware (screws). If you’re mounting
onto a wooden surface, you can drive the screws directly into the wood. You may need to
drill guide holes first, particularly if mounting the camera onto hardwood. If mounting on
masonry or similar surface, use the included wall plugs.
The camera mounts to a flat surface, such as the underside of a ceiling or a sturdy wall.
β€’ Using the included star-key tool, remove the dome cover.
β€’ Choose the most appropriate port to run the cable out of.
β€’ If you’re going to run the cable into the roof or ceiling cavity, then prepare a hole
in the ceiling which will line up with the hole in the top of the dome base. Use a
high-quality sealant to ensure complete waterproofness.
β€’ If you’re planning to run the cable on the exterior of the ceiling/wall, then undo
the small protective cap on the side of the dome base and run the cable out that
way. Note that this will reduce the weather resistance of the camera unless it is
properly sealed with a high-quality sealant.
β€’ Attach the dome base to the ceiling using the included mounting screws, we
recommend you put some silicone sealant under each screw head to prevent moisture
entering the camera case.
β€’ Aim the camera, and adjust the zoom and focus controls (see section Adjusting Zoom
and Focus for details) to get the image that you want. It can be really helpful to have
a television or monitor on hand so you can see what you’re doing! Help from an able
assistant never goes astray, either.
β€’ The dome cover only mounts one way - that is, the cable-out port on the side of the
dome base means that the cover will only slide on when correctly oriented. If you’ve
changed the default position of the camera, this may mean you’ll need to re-orient the
plastic dome cover.
β€’ On the underside of the dome cover there are two screws which are responsible
for holding the plastic dome in place.
β€’ Using a precision screwdriver, loosen the two small screws, and slide the tabs
aside.
β€’ Rotate the plastic component of the dome so that the transparent window lines
up with the orientation of the camera.
β€’ Re-orient the tabs and tighten the screws to hold the plastic dome in place.
β€’ Re-attach the dome cover. When re-attaching the dome cover, ensure the foam ring
that is fitted around the lens is tight against the inside of the clear plastic dome and
that the spring is correctly in place. This will isolate the camera lens from the infrared
LEDs and help cut down the light reflecting into the lens. It is important that you very
do this; otherwise you may not get a clear picture during night vision. If you see bright
spots in the picture, remove the dome cover and adjust the foam ring accordingly.
β€’ Secure in place by tightening the screws.


Product specificaties

Merk: Swann
Categorie: Bewakingscamera
Model: Pro-981

Heb je hulp nodig?

Als je hulp nodig hebt met Swann Pro-981 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Swann

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera