Swann Pro-961 Handleiding

Swann Bewakingscamera Pro-961

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann Pro-961 (18 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

Super Wide-Angle

Dome Camera

INSTRUCTION MANUAL

MWADCAM150514T

ENGLISH

Congratulations on your purchase of this PRO-CAM from Swann! You’ve chosen well; we

think this is one of the finest CCTV video cameras available. The PRO-CAM is great for

monitoring a wide open space whilst maintaining a high level of detail, even in low-light

situations.

Placement Guide

The PRO-CAM has a 3.6mm wide-angle lens built-in which allows it to see almost 75

degrees horizontally. What does this mean for you when placing it?

• You will be able to see a really wide area. If it’s mounted

high up in a square corner, you’ll probably be able to see

along both walls. You’ll be able to monitor a large area

with only one camera.

• Things may look further away than they really are.

Anything further than a few meters (ten feet or so) from

the camera may appear to be too small for the level of

detail you require.

• Vertical and horizontal lines might appear curved when

they near the edge of the camera’s view. This is normal, and it’s the side effect of

cramming so much viewing area onto one screen.

The PRO-CAM is great for monitoring rooms or areas as wide as, or wider than, they are

long. For really wide areas, you may need a second camera.

Typically, it is best mounted in a corner looking across and down into the room, so that it

can look over intervening obstacles. The higher the ceiling the camera is mounted on, the

more it will be able to see and the harder it’ll be for an intruder to access the camera or

interfere with it.

Tips & Tricks

• Try to aim the camera at an area which is evenly lit, as objects or people in shadows

near brightly lit objects are very hard to see.

• It’s better to have the camera in the shade looking into the light than vice-versa.

• Avoid having bright light sources in your image. This includes the obvious (such as the

sun or an artificial light source) but also things such as reflections. Cars are notorious

for reflected light sources, as are buildings with a lot of windows, mirrors and so forth.

Some information on “Low Light” situations

Under artificial lights, the average room is illuminated to somewhere in the vicinity of 40 ~

60lx. If you’ve got bright lights and white walls, it may push over 100, whereas dim lights (or

energy saving lamps) and dark walls might put the value below 20lx. The PRO-CAM should

work in these conditions, but there’s really no substitute for actually shining a light on

what you want to see, so position your camera or lights carefully to obtain the best lighting

conditions for the subject area of your camera’s scene.

About the Camera

75° 10m

33ft

15.3m

51ft

ENGLISH

Mounting and Installing

The camera mounts onto the underside of a flat, vertical or horizontal surface using

screws. The surface must have sufficient strength to hold the camera. Materials such as

hardwood, brick or masonry are good options, and we’ve included all the gear you’ll need to

mount it there (except the tools - sorry, you’ll still need your own drill). You can mount the

camera onto a metal surface, but you’ll need to supply your own mounting hardware.

To mount the camera:

• Using the small hex key (supplied), undo the two locking screws on the sides of the

PRO-CAM dome.

• Remove the top of the dome.

• Attach the base plate of the dome to the

wall/ceiling in the position you’d like

using the supplied screws. If mounting

to brickwork, concrete or other masonry

surface, use the included wall plugs.

• Aim the camera in the direction you’d

like. It can help to move a monitor or

television out to the camera’s location to

ensure you get it aimed and positioned

properly.

• Once the camera is aimed, re-attach

the dome cover. Ensure that the black,

protective plastic isn’t obscuring the camera’s vision.

Positioning your Cables

• When running your cable, try to avoid bending it at sharp angles.

• Don’t put your cable near live electrical wiring. AC electricity generates radio “noise”

which can interfere with the signal from your camera.

Weatherproofing

• The PRO-CAM is built to be weather resistant. It’ll stand up to getting wet occasionally,

but it’s not intended to be underwater all the time. When mounting the camera, ensure

that it’s not in a location where water is likely to pool or build up over time.

• Long term exposure to direct sunlight will adversely affect the camera. Over time,

the infrared and ultraviolet radiation will eventually begin to degrade the integrity of

the plastic cover, reducing transparency and making it brittle (and, therefore, more

vulerable to vandalism or accidental damage). Basically, put it in the shade!

The three screw holes, as seen from above.

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	Pro-961

Heb je hulp nodig?

Als je hulp nodig hebt met Swann Pro-961 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Bewakingscamera Swann

Swann Pro DVR8-4000 Handleiding

8 November 2023

Swann DVR4-1000 Handleiding

8 Juli 2023

Swann Enforcer SWPRO-4KMQB Handleiding

28 Juni 2023

Swann SWIFI-PTCAM232GB Handleiding

4 Juni 2023

Swann AllSecure650 SWNVK-650KH4 Handleiding

3 Juni 2023

Swann PrivateEye ADS-45 Handleiding

26 Mei 2023

Swann SW331-PR5 Handleiding

24 Mei 2023

Swann SWNVK-887802B2FB Handleiding

14 Mei 2023

Swann SW361-THC Handleiding

11 Mei 2023

Swann SWPRO-961CAM Handleiding

10 Mei 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Honeywell HC35WE5R3 Handleiding

20 December 2024

Honeywell Performance H4W8PER2V Handleiding

20 December 2024

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024

TP Link VIGI C450 Handleiding

18 December 2024

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024

Hikvision DS-2CE17U0T-LF Handleiding

18 December 2024