Swann PRO-842 Handleiding

Swann Bewakingscamera PRO-842

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann PRO-842 (12 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 72 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Multi-Purpose Day / Night

Security Camera

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

Cámara de Seguridad Diurna

/ Nocturna Multipropósito

ENGLISH

Limited Warranty Terms & Conditions

Swann Communications warrants this product against defects in workmanship and material for a

period of one (1) year from its original purchase date. You must present your receipt as proof of date

of purchase for warranty validation. Any unit which proves defective during the stated period will be

repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user

is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end

user is responsible for all shipping costs incurred when shipping from and to any country other than

the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use

of or the inability to use this product. Any costs associated with the fitting or removal of this product by

a tradesman or other person or any other costs associated with its use are the responsibility of the end

user. This warranty applies to the original purchaser of the product only and is not transferable to any

third party. Unauthorized end user or third party modifications to any component or evidence of misuse

or abuse of the device will render all warranties void.

By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable

by local laws, regulations and legal rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if

the goods fail to be of acceptable quality and the failure does not amount to major failure.

FCC Verification

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• These devices may not cause harmful interference, and

• These devices must accept any interference received, including interference that may cause

undesired operation.

Important Note:

All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any

camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws and regulations

that prohibit or limit the use of cameras and to comply with the applicable laws and regulations.

WARNING

Modifications not approved by the party responsible for compliance could void user’s authority to

operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

• Make sure product is fixed correctly and stable if fastened in place.

• Do not operate if wires and terminals are exposed.

Before you begin

ENGLISH

Congratulations on your purchase of this Swann Multi-Purpose Day / Night Security Camera!

This instruction manual will walk you through the basics of installing and connecting your

camera.

This camera is very sensitive to light and therefore can make use of even the smallest

amount of light to provide an image of what it sees. In low light, this comes through as

a black and white image. In complete or near-total darkness, the camera uses built-in

infrared LEDs to illuminate the area in front of it. This light is invisible to the human eye,

although you might notice a faint red glow coming from the front of the camera - this is

normal.

Installation and Connection

Choosing the Location for the Camera

The camera is very flexible, and can be installed practically anywhere. Some of the things

you’ll have to consider when choosing a location are:

• What you want to monitor, and where you’ll get the best view of it.

• How you’re going to connect the camera to your monitoring system. Remember that

cables and connections should be kept out of the weather.

• How to keep the camera out of harm’s way.

✐ General Guidelines

• Place the camera in an position that a potential security threat will find it difficult to

avoid. A strategy which is often effective is to monitor entrances and exits - after all,

a security threat has to get in somewhere.

• Install the camera where it’s out of reach or not easily accessible by vandals. For

example, under the eaves of a roof or high up in protected corners of a wall. The higher

the camera is mounted, the harder it’ll be for vandals to interfere with it.

• Typically, the best view is obtained approximately 7ft (2m) to 10ft (3m) high, looking

slightly downwards. Try to aim the camera at an area which is evenly lit, as objects

or people in shadows near brightly lit objects are very hard to see.

• The internal components of the camera can be damaged by prolonged exposure to

direct sunlight. Don’t let direct sunlight into the lens!

• Avoid having bright light sources in your image. This includes the obvious (such as

the sun or an artificial light source) but also things such as reflections. Cars are

notorious for reflected light sources, as are buildings with a lot of windows, mirrors

and so forth.

• The camera’s night vision will give well-exposed images if the area is dark. However,

if there’s a bright point source in the camera’s view (a streetlight, car headlights or

similar) then it might not engage night vision mode.

About the Camera

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	PRO-842
Kleur van het product:	Wit
Gewicht:	305 g
Breedte:	53 mm
Diepte:	96 mm
Hoogte:	85 mm
Snoerlengte:	18 m
Soort:	CCTV-bewakingscamera
Gebruikershandleiding:	Ja
Internationale veiligheidscode (IP):	IP67
Vormfactor:	Rond
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond/muur
Stroomuitvoer (volt):	12
Minimale belichting:	0 Lux
Field of view (FOV) hoek:	59 °
Aantal cameras:	2
Meegeleverde kabels:	BNC
Nachtvisie:	Ja
LED-type:	IR
Witbalans:	Auto
Veiligheidsfunties:	Dust resistant, Water resistant
Inclusief schroeven:	Ja
Aantal TV lijnen:	900
Dag/nacht modus:	Ja
Montagebeugels meegeleverd:	Ja
Weerbestendig:	Ja
Nachtkijker afstand:	25 m
Aantal verlichtingen LEDS:	36
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-20 - 50 °C
Waarschuwingsstickers:	Ja