Swann PRO-761 Handleiding

Swann Bewakingscamera PRO-761

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann PRO-761 (8 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

PRO-761 Dome

English

222

Congratulations on your purchase of this PRO-761 from ! You’ve chosen Swann

well: we think this is one of the ﬁnest CCTV video cameras available. The PRO-761

is great for monitoring a wide open space whilst maintaining a high level of detail,

even in low-light situations.

Placement Guide

The PRO-761 has a 3.6mm built-in which allows it to see almost wide-angle lens

80 degrees horizontally. What does this mean for you when placing it?

• You will be able to see a really

wide area. If it’s mounted high up

in a square corner, you’ll probably be

able to see along both walls. You’ll

be able to monitor a large area with

only one camera.

• Things may look further away than

they really are. Anything further

than a few meters (ten feet or so)

from the camera may appear to be

too small for the level of detail you

require.

• Vertical and horizontal lines might appear curved when they near the edge of

the camera’s view. This is normal, and it’s the side effect of cramming so much

viewing area onto one screen.

The PRO-761 is great for monitoring rooms or areas as wide as, or wider than, they

are long. For really wide areas, you may need a second camera.

Typically, it is best mounted in a corner looking across and down into the room,

so that it can look over intervening obstacles. The higher the ceiling the camera is

mounted on, the more it will be able to see and the harder it’ll be for an intruder

to access the camera or interfere with it.

Tips:

• Try to aim the camera at an area which is evenly lit, as objects or people in shadows

near brightly lit objects are very hard to see.

• It’s better to have the camera in the shade looking into the light than vice-versa.

• Avoid having bright light sources in your image. This includes the obvious (such as the

sun or an artiﬁcial light source) but also things such as reﬂections. Cars are notorious

for reﬂected light sources, as are buildings with a lot of windows, mirrors and so forth.

80° 10m

33ft

16.8m

55ft

Installing the Camera

The camera mounts onto the underside of a ﬂat, vertical or horizontal surface using

screws. The surface must have sufﬁcient strength to hold the camera. Materials

such as hardwood, brick or masonry are good options, and we’ve included all the

gear you’ll need to mount it there (except the tools - sorry, you’ll still need your

own drill). You can mount the camera onto a metal surface, but you’ll need to

supply your own mounting hardware.

To mount the camera:

• Using the small hex key

(supplied), undo the two locking

screws on the sides of the PRO-

761 dome.

• Remove the top of the dome.

• Attach the base plate of the

dome to the wall/ceiling in the

position you’d like using the

supplied screws. If mounting

to brickwork, concrete or

other masonry surface, use the

included wall plugs.

• Aim the camera in the direction you’d like. It can help to move a monitor

or television out to the camera’s location to ensure you get it aimed and

positioned properly.

• Once the camera is aimed, re-attach the dome cover. Ensure that the black,

protective plastic isn’t obscuring the camera’s vision.

Tips: Positioning your Cables

• When running your cable, try to avoid bending it at sharp angles.

• Don’t put your cable near live electrical wiring. AC electricity generates radio

“noise” which can interfere with the signal from your camera.

Tips: Weatherprooﬁng

• The PRO-761 is built to be weather resistant. It’ll stand up to getting wet

occasionally, but it’s not intended to be underwater all the time. When

mounting the camera, ensure that it’s not in a location where water is likely to

pool or build up over time.

• Long term exposure to direct sunlight will adversely affect the camera. Over

time, the infrared and ultraviolet radiation will eventually begin to degrade the

integrity of the plastic cover, reducing transparency and making it brittle (and,

therefore, more vulerable to vandalism or accidental damage). Basically, put it

in the shade!

The three screw holes, as seen from above.

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	PRO-761
Kleur van het product:	Wit
Gewicht:	398 g
Breedte:	110 mm
Diepte:	110 mm
Hoogte:	70 mm
Vormfactor:	Dome
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Maximum resolutie:	976 x 582 Pixels
Minimale belichting:	0.1 Lux
Ingebouwde HDD:	Nee
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/3 "
Aansluiting voor netstroomadapter:	Ja
Type beeldsensor:	CCD
Optische zoom:	- x
Veiligheidsfunties:	Vandaalbestendig
Aantal TV lijnen:	700
Afstandsbediening inbegrepen:	Ja
Wifi:	Nee
Kijkhoek lens, horizontaal:	67 °
NTSC resoluties:	976 x 494 Pixels
PAL resoluties:	976 x 582 Pixels