Swann Pro-753 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Swann Pro-753 (14 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
PRO-747 / PRO-753
Dome Camera
INSTRUCTION MANUAL
EN
1
Limited Warranty Terms & Conditions
Swann Communications warrants this product against defects in workmanship and material for a period of one
(1) year from its original purchase date. You must present your receipt as proof of date of purchase for warranty
validation. Any unit which proves defective during the stated period will be repaired without charge for parts or
labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred
to send the product to Swannā€™s repair centres. The end user is responsible for all shipping costs incurred when
shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use of or the
inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman or other
person or any other costs associated with its use are the responsibility of the end user. This warranty applies to the
original purchaser of the product only and is not transferable to any third party. Unauthorized end user or third
party modifications to any component or evidence of misuse or abuse of the device will render all warranties void.
By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by local
laws, regulations and legal rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to major failure.
FCC Verification
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
ā€¢ Reorient or relocate the receiving antenna
ā€¢ Increase the separation between the equipment and the receiver
ā€¢ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
ā€¢ Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
ā€¢ These devices may not cause harmful interference, and
ā€¢ These devices must accept any interference received, including interference that may cause undesired
operation.
Important Note:
All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any camera for any
purpose, it is the buyerā€™s responsibility to be aware of all applicable laws and regulations that prohibit or limit the use
of cameras and to comply with the applicable laws and regulations.
WARNING
Modifications not approved by the party responsible for compliance could void userā€™s authority to
operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS
ā€¢ Make sure product is fixed correctly and stable if fastened in place.
ā€¢ Do not operate if wires and terminals are exposed.
FOR BEST RESULTS:
ā€¢ This is a semi-professional 360Āŗ PTZ dome camera, conforming to PELCO P/D standards. To
obtain the best image quality, please use a high quality cable, particularly if the cables required
length exceeds 100ft/35m. For the highest video quality, use a cable with a solid copper inner
conductor and shielded with copper braid.
Before You Begin
2
Contents
Quick Reference
Before You Begin 1
Contents 2
Introduction 3
Layout of the Camera 3
Layout of the OSD Controller 4
Installation
Choosing the Location 5
Joining Cables 6
Exposure to Weather 6
Attaching the Mount 6
Mounting the Camera 6
Connection Guide
Connecting the Camera 7
Connecting two RS485 cables 8
8Setting up the Camera(s) for use with your DVR
Controlling the Camera 9
Advanced Feature: On-Screen Display 10
Troubleshooting 11
Notice 12
Notes 12
Helpdesk / Technical Support Details Rear Cover
Default PTZ Configuration
Command Address: 1
Protocol: Pelco-D
Baud Rate: 9600bps
RS485 Polarity: +A Red Wire
-B Black Wire


Product specificaties

Merk: Swann
Categorie: Bewakingscamera
Model: Pro-753

Heb je hulp nodig?

Als je hulp nodig hebt met Swann Pro-753 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Swann

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera