Swann PRO-743 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Swann PRO-743 (8 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
1
800TVL Dome Camera
INSTRUCTION MANUAL
EN
1
Before You Begin
Limited Warranty Terms & Conditions
Swann Communications warrants this product against defects in workmanship and material for a
period of one (1) year from its original purchase date. You must present your receipt as proof of date
of purchase for warranty validation. Any unit which proves defective during the stated period will be
repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user
is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end
user is responsible for all shipping costs incurred when shipping from and to any country other than
the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use
of or the inability to use this product. Any costs associated with the fitting or removal of this product by
a tradesman or other person or any other costs associated with its use are the responsibility of the end
user. This warranty applies to the original purchaser of the product only and is not transferable to any
third party. Unauthorized end user or third party modifications to any component or evidence of misuse
or abuse of the device will render all warranties void.
By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable
by local laws, regulations and legal rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to major failure.
WARNING
Modifications not approved by the party responsible for compliance could void user’s authority to
operate the equipment.
FCC Verification
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
β€’ Reorient or relocate the receiving antenna
β€’ Increase the separation between the equipment and the receiver
β€’ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
β€’ Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
β€’ These devices may not cause harmful interference, and
β€’ These devices must accept any interference received, including interference that may cause
undesired operation.
Important Note:
All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any
camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws and regulations
that prohibit or limit the use of cameras and to comply with the applicable laws and regulations.
IMPORTANT SAFETY INSTRUCTIONS
β€’ Make sure product is fixed correctly and stable if fastened in place.
β€’ Do not operate if wires and terminals are exposed.
2
Introduction
Congratulations on your purchase of this Swann Dome Security Camera! This
instruction manual will walk you through the following:
β€’ Choosing a location
Aiming the camera, Suitable mounting surfaces, How to run cables for
improved weather-resistance, Mounting the camera
β€’ Connecting the camera
How to connect the camera to your DVR and power
β€’ Configuring the camera (optional)
Using the OSD to alter your image settings for maximum personalization
β€’ Troubleshooting
This camera is very sensitive to light and therefore can make use of even the
smallest amount of light to provide an image of what it sees. In low light, this
comes through as a black and white image.
In complete or near-total darkness, the camera uses built-in infrared LEDs to
illuminate the area in front of it. This light is invisible to the human eye, although
you might notice a faint red glow coming from the front of the camera - this is
normal.
It has an OSD (on-screen display), that you can access to change various options
for image quality, white balance and shutter speed.
Installation and Connection
Choosing the Location for the Camera
There are a number of factors to consider when choosing where to mount your
Dome Camera - not least of which is what you will want to see.
General Guidelines
β€’ The camera can be mounted to a wall or ceiling. The mounting surface must
have sufficient strength to hold the camera. Materials such as hardwood, brick
or masonry are good options.
β€’ Install the camera in shady spot. Prolonged exposure to direct sunlight can
damage the internal components of the camera and adversely affect the
camera’s performance.
β€’ Try to aim the camera at an area that is evenly lit, as objects or people in
shadows near brightly lit objects are very hard to see.
β€’ Avoid having bright light sources to the sides of, or behind the subject as this
will interfere with your images.


Product specificaties

Merk: Swann
Categorie: Bewakingscamera
Model: PRO-743
Kleur van het product: Wit
Gewicht: 620 g
Breedte: 120 mm
Diepte: 120 mm
Hoogte: 100 mm
Snoerlengte: 18 m
Soort: CCTV-bewakingscamera
Gebruikershandleiding: Ja
Materiaal behuizing: Aluminium
Internationale veiligheidscode (IP): IP67
Vormfactor: Dome
Ondersteuning voor plaatsing: Binnen & buiten
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Nee
Montagewijze: Plafond
Stroomuitvoer (volt): 12
Minimale belichting: 0 Lux
Field of view (FOV) hoek: 43 Β°
Aantal cameras: 2
Meegeleverde kabels: BNC
Ingebouwde HDD: Nee
Nachtvisie: Ja
LED-type: IR
Infrarood wavelength: 850 nm
Formaat analoog signaal: NTSC, PAL
Volledige HD: Nee
Type beeldsensor: CCD
Veiligheidsfunties: Dust resistant, Water resistant
Power over Ethernet (PoE): Nee
Inclusief schroeven: Ja
Aantal TV lijnen: 800
Dag/nacht modus: Ja
BNC output ports: 1
Nachtkijker afstand: 25 m
Aantal verlichtingen LEDS: 36
Infrarood (IR)-afsluitingsfilter: Ja
Wifi: Nee
Bedrijfstemperatuur (T-T): -20 - 50 Β°C
Lens diameter: 6 mm
Waarschuwingsstickers: Ja
NTSC resoluties: 976 x 494 Pixels
PAL resoluties: 976 x 582 Pixels
Infra-red LEDs leven: 10000 uur

Heb je hulp nodig?

Als je hulp nodig hebt met Swann PRO-743 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Swann

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera