Swann PRO-742 Handleiding

Swann Bewakingscamera PRO-742

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann PRO-742 (10 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

Multi-Purpose Day /

Night Security Camera

INSTRUCTION MANUAL

ENGLISH

Before You Begin

Limited Warranty Terms & Conditions

Swann Communications warrants this product against defects in workmanship and material for a period of one

(1) year from its original purchase date. You must present your receipt as proof of date of purchase for warranty

validation. Any unit which proves defective during the stated period will be repaired without charge for parts or

labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred

to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when

shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use of or the

inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman or other

person or any other costs associated with its use are the responsibility of the end user. This warranty applies to the

original purchaser of the product only and is not transferable to any third party. Unauthorized end user or third

party modifications to any component or evidence of misuse or abuse of the device will render all warranties void.

By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by local

laws, regulations and legal rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable

quality and the failure does not amount to major failure.

FCC Verification

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• These devices may not cause harmful interference, and

• These devices must accept any interference received, including interference that may cause undesired

operation.

Important Note:

All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any camera for any

purpose, it is the buyer’s responsibility to be aware of all applicable laws and regulations that prohibit or limit the use

of cameras and to comply with the applicable laws and regulations.

WARNING

Modifications not approved by the party responsible for compliance could void user’s authority to

operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

• Make sure product is fixed correctly and stable if fastened in place.

• Do not operate if wires and terminals are exposed.

ENGLISH

Congratulations on your purchase of this Swann Multi-Purpose Day / Night Security

Camera.

This camera is very sensitive to light and therefore can make use of even the smallest

amount of light to provide an image of what it sees. In low light, this comes through as

a black and white image.

In complete or near-total darkness, the camera uses built-in infrared LEDs to

illuminate the area in front of it. This light is invisible to the human eye, although you

might notice a faint red glow coming from the front of the camera - this is normal.

This camera also has an OSD (on-screen display) feature, that you can access to

change various options for image quality, white balance and shutter speed.

Introduction

Choosing a Location for the Camera

To get optimal results from your camera, where you install is important. You should

consider the distance between the camera and its subject to ensure you obtain a good

view of the areas in focus. Also think about the appropriate mounting places (e.g.,

under the eaves of a roof is a good choice) where it won’t be either an easy target for

vandals or affected by constant light reflections of moving vehicles (which can result

in falsely triggered motion detection). There are a number of factors you will need to

consider when choosing where to mount your camera - not least of which is what you

will want to see.

General Guidelines

• Try to place the camera in an position that a potential security threat will find it

difficult to avoid. A strategy which is often effective is to monitor entrances and exits

- after all, a security threat has to get in somewhere.

• Install the camera in shady spot. Even though the camera is weather and water-

resistant, prolonged exposure to adverse weather conditions (direct sunlight

or excessive moisture) may eventually damage the internal components of the

camera and adversely affect its performance.

• Typically, the best view is obtained approximately 7ft (2m) to 10ft (3m) high, looking

slightly downwards. Try to aim the camera at an area which is evenly lit, as objects

or people in shadows near brightly lit objects are very hard to see.

• Avoid having bright light sources in your image. This includes the obvious (such

as the sun or an artificial light source) but also things such as reflections. Cars

are notorious for reflected light sources, as are buildings with a lot of windows,

mirrors and so forth.

• The camera’s night vision will give well-exposed images if the area is dark.

However, if there’s a bright light source in the camera’s view (a streetlight, car

headlights or similar) then it might not engage night vision mode.

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	PRO-742
Kleur van het product:	Wit
Gewicht:	305 g
Breedte:	53 mm
Diepte:	96 mm
Hoogte:	85 mm
Snoerlengte:	18 m
Soort:	CCTV-bewakingscamera
Gebruikershandleiding:	Ja
Materiaal behuizing:	Aluminium
Internationale veiligheidscode (IP):	IP67
Vormfactor:	Rond
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond/muur
Stroomuitvoer (volt):	12
Minimale belichting:	0 Lux
Field of view (FOV) hoek:	57 °
Aantal cameras:	2
Meegeleverde kabels:	BNC
Nachtvisie:	Ja
LED-type:	IR
Infrarood wavelength:	850 nm
Formaat analoog signaal:	NTSC, PAL
Volledige HD:	Nee
Veiligheidsfunties:	Dust resistant, Water resistant
Power over Ethernet (PoE):	Nee
Inclusief schroeven:	Ja
Aantal TV lijnen:	800
Dag/nacht modus:	Ja
BNC output ports:	1
Nachtkijker afstand:	25 m
Aantal verlichtingen LEDS:	36
Infrarood (IR)-afsluitingsfilter:	Ja
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-20 - 60 °C
Lens diameter:	4.8 mm
Waarschuwingsstickers:	Ja
NTSC resoluties:	976 x 494 Pixels
PAL resoluties:	976 x 582 Pixels
Infra-red LEDs leven:	10000 uur