Swann PRO-655 Handleiding

Swann Bewakingscamera PRO-655

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann PRO-655 (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

PRO-655

222

Congratulations on your purchase of this PRO-655 from ! You’ve chosen well: we think this is Swann

one of the ﬁnest CCTV video cameras available. The PRO-655 is great for monitoring a speciﬁc area and

is able to provide a high level of detail, even at night - it can see up to 20m/65ft in the dark.

Placement Guide

The PRO-655 has a built-in which allows it to focus its attention onto one speciﬁc area. 6mm, 50° lens

What does this mean for you when placing it?

• The camera will focus on the one particular area in front of the

lens, but won’t see much happening to the sides of it. You’ll

need to aim the camera speciﬁcally at what you want to see.

• Objects and people will look like they are slightly closer to the

camera than they really are. You’ll be able to monitor a space

which is as long (or longer) than it is wide.

The PRO-655 is great for monitoring long, narrow spaces such as hallways or corridors. It’s also great

for monitoring a speciﬁc space, such as a doorway, smaller room or staircase.

It’s best mounted high-up in a corner looking down into the space being monitored, so that it can look

over intervening obstacles. Also, the higher the camera is mounted, the harder it’ll be for an intruder

to access the camera or interfere with it.

Installing the Camera

The camera mounts onto a ﬂat, vertical surface using screws. The surface must have sufﬁcient strength

to hold the camera. Materials such as hardwood, brick or masonry are good options, and we’ve included

all the gear you’ll need to mount it there (except the tools - sorry, you’ll still need your own drill). You

can mount the camera onto a metal surface, but you’ll need to supply your own mounting hardware.

To mount the camera:

• Using the holes on the camera stand as a guide, mark the locations on your wall to drill. Make

sure the wall is thick and strong enough that you won’t drill through it.

• If the wall is masonry, brickwork or similar, use the provided wall plugs. If the wall is made of

wood, then the camera can be screwed directly onto the wall.

• Ensure that the cable is protected from the weather. The camera is weatherproof, but the cable

(particularly the power and video-out plugs) is not.

• Once the camera has been mounted, ensure that it is securely ﬁxed in place. The camera is vandal

resistant, but that won’t help if an intruder can remove the whole camera!

Troubleshooting

Problem: At night, all I see is white.

Solution: The camera is most likely looking through a window. At night, the infrared light the camera

uses to see in the dark can ‘bounce back’ off a reﬂective surface (such as glass, water, spider webs,

some ceramics and so on) and effectively blind the camera. If you want to see outside, mount the

camera outside - we made it weatherproof for a reason!

Problem: I see only a blank screen where my image should be.

Solution: Check the wiring to the camera, and ensure the camera is being supplied power from

the included power adapter. Try using a different video lead, or connecting the camera to a different

television or monitor. Be sure there are no devices interrupting your signal, such as a DVR or VCR that

isn’t outputting the signal correctly.

Problem: I can’t see anything at night.

Solution: The maximum range of the night vision is just that, the maximum range. If there’s nothing

in this range, you won’t see anything. Also, some dark objects (like the proverbial black cat) may not

reﬂect enough light to be seen except as a silhouette if the background is brighter. Some objects which

can easily be seen in visible light don’t reﬂect much infrared light.

50°

10m

33ft

9.3m

28ft

Technical Speciﬁcations

Video

Image Sensor 1/3” CCD

Video Quality 540 TV Lines

Effective Pixels NTSC: 568 x 494

PAL: 752 x 582

Min. Illumination 0 Lux (IR on)

White Balance Automatic

Electronic Shutter NTSC: 1/60 ~ 1/100 000

PAL: 1/50 ~ 1/100 000

Gain Control Automatic

Backlight Comp. Yes

Wide Dynamic Range Yes

Lens 6mm

Viewing Angle 50°

Night Vision

Range Up to 20m (65ft)

IR Cut Filter No

Number of IR LEDs 24

Infrared Wavelength 850nm

IR LED Life (Average) 10, 000 hours

General

Operating Power DC 12V @ 300mA

Operating Temp. -20°C ~ 45°C (-4°F ~ 113°F)

Casing Aluminium

Dimensions 165mm x 115mm x 67mm

(6.5” x 4.5” x 3.15”)

Weight 465g / 17.5oz (approx)

Tips & Tricks

• Try to aim the camera at an area which is evenly lit. Objects or people in shadows near brightly lit

objects are very hard to see.

• It’s better to have the camera in the shade looking into the light than vice-versa.

• When running your cable, try to avoid bending it at sharp angles. This can interrupt the signal

ﬂow and degrade the quality of your images. If the cable must be bent, try to make the bend as

gradual as possible.

• Don’t put your cable near live electrical wiring. AC electricity generates radio “noise” which can

interfere with the signal from your camera.

INPUT

2A. Connecting Directly to TV 2B. Connecting to Your Existing DVR

Connect a BNC to RCA

adapter and connect to video

input on your TV or VCR

2Connect the BNC extension

cable to an open channel on

the back of the RDV

Plug in the camera

power adapter into

a wall socket

Connect the camera’s DC

and BNC socket cable to the

extension cable’s DC and BNC plugs

Connect the extension cables

DC socket to the DC plug on

the power adapter

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	PRO-655
Kleur van het product:	Zwart
Gewicht:	300 g
Breedte:	70 mm
Diepte:	60 mm
Hoogte:	170 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Aluminium
Internationale veiligheidscode (IP):	IP67
LED-indicatoren:	Ja
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond
Maximum resolutie:	752 x 582 Pixels
Stroomuitvoer (volt):	+12V
Minimale belichting:	0 Lux
Field of view (FOV) hoek:	45 °
Meegeleverde kabels:	BNC, RCA
Nachtvisie:	Ja
LED-type:	IR
Infrarood wavelength:	850 nm
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/3 "
Aansluiting voor netstroomadapter:	Ja
Type beeldsensor:	CCD
Optische zoom:	- x
Camera sluitertijd:	1/100000 s
Interface:	BNC
Type camerasluiter:	Elektronisch
Ondersteunde grafische resoluties:	768 x 494
PTZ control:	Nee
Aantal TV lijnen:	540
Dag/nacht modus:	Ja
Montagebeugels meegeleverd:	Ja
Nachtkijker afstand:	25 m
Aantal verlichtingen LEDS:	12
Bedrijfstemperatuur (T-T):	-20 - 45 °C
Lens diameter:	6 mm
NTSC resoluties:	768 x 494 Pixels
PAL resoluties:	752 x 582 Pixels
Infra-red LEDs leven:	10000 uur