Swann PenCam SWVID-PENGY8 Handleiding

Swann Bewakingscamera PenCam SWVID-PENGY8

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Swann PenCam SWVID-PENGY8 (8 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 79 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
2
IMPORTANT NOTE: Prohibition against eavesdropping
All jurisdictions have speci๎€Ÿc laws and regulations relating to the use of cameras.
Before using any camera for any purpose, it is the buyerโ€™s responsibility to be aware
of all applicable laws and regulations that prohibit or limit the use of cameras and to
comply with the applicable laws and regulations.
Warnings:
โ€ข๎€ Modi๎€Ÿcations not approved by the party responsible for compliance could void
userโ€™s authority to operate the equipment.
โ€ข๎€ PenCam recorder
โ€ข๎€ Operating Instructions
โ€ข๎€ Ink Re๎€Ÿll
โ€ข๎€ Software CD-ROM
Before You Begin
Package Contents
Layout of the Pencam
Blue / Orange
Status LED
Reset Button
Hidden
Camera
Hidden USB Port
(Twist to reveal)
Working
Pen Tip Power/Record
button
USB Connection
The USB port and mode
selection switch are concealed
inside the PenCam.
To access them, you need to
hold one end of the pen and
twist the other end counter-
clockwise until the two parts
separate.
Mode
Select Switch
3
Picture
mode
Video
mode
Turning the PenCam On
โ€ข๎€ Press the power/record button (on top o๎€€ the pen) and hold until the both the
orange and blue lights turn on then release it. When the camera is ready to use
the orange standby light will stay on and the blue light will turn o๎€€.
โ€ข๎€ The orange light will blink when it is on standby in picture mode or stay lit when
it is on standby in video mode.
Turning the PenCam O๎€Ÿ
โ€ข๎€ With the PenCam on standby press and hold the power/record button until the
orange light turns o๎€€.
โ€ข๎€ The PenCam will not switch o๎€€ if you do this while the PenCam is in Video mode
and recording.
โ€ข๎€ If the PenCam is recording you must press the button once to stop recording and
return to standby (static orange light) then press and hold the button until the
orange light turns o๎€€.
Operating the Pencam
Switching between Video and Picture
To switch between Video and Picture mode,
unscrew the PenCam to reveal the USB
connector. Using the tip of a pen or ๎€€ngernail,
move the selection switch (pictured) to 1 for
PICTURE or 2 for VIDEO.
Charging the PenCam
The PenCam has a built in lithium-ion battery that provides approximately 45
minutes of power when fully charged.
Charge the PenCam by connecting the hidden USB connector inside the PenCam to
a USB port on your computer. The status LED will slowly ๎€€ash orange while charging.
Full charge time is approximately 90 minutes. The PenCam will stop ๎€€ashing when it
is fully charged.
IMPORTANT NOTE: Before using the PenCam for the ๎€€rst time, connect it to a USB
port and charge it fully. The PenCam will not function as a camera while it is plugged
into the USB port.


Product specificaties

Merk: Swann
Categorie: Bewakingscamera
Model: PenCam SWVID-PENGY8

Heb je hulp nodig?

Als je hulp nodig hebt met Swann PenCam SWVID-PENGY8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Swann

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera