Swann NHD-881 Handleiding

Swann Bewakingscamera NHD-881

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann NHD-881 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

M881CAMVER1E | © Swann 2017

Helpdesk & Technical Support

Technical Support E-mail: tech@swann.com

Technical Support Website: support.swann.com

Telephone Helpdesk

USA Toll Free 1-800-627-2799

USA Parts & Warranty 1-800-627-2799

(M-F, 9am-5pm US PT)

AUSTRALIA 1800 788 210

NEW ZEALAND Toll Free 0800 479 266

UK 0808 168 9031

Swann Communications warrants this product against defects in workmanship and material for a period of

one (1) year from its original purchase date. You must present your receipt as proof of purchase for warranty

validation. Any unit which proves defective during the stated period will be repaired without charge for parts or

labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred

to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when

shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use of or

the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman

or other person or any other costs associated with its use are the responsibility of the end user. This warranty

applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end

user or third party modifications to any component will render all warranties void. By law some countries do not

allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal

rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be

of acceptable quality.

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) These devices may not cause harmful interference.

(2) These devices must accept any interference received, including interference that may cause undesired op-

eration.

4K Ultra HD

Security Camera

4K Dome Camera for Ultra HD Network Video Recorders

EN INSTRUCTION MANUAL

Security Made Smarter

Limited Warranty - Terms & Conditions5 FCC Verification6

2. Position the dome base in the location you want to mount to

then mark the mounting holes on the surface to position the

screws (mounting template included). Using the appropriate

screws for the surface you are mounting to, screw the dome base

into place.

3. To adjust the camera to the desired focal position, use a

Phillips head screwdriver to loosen the lock screw.

4. The dome enclosure can be rotated left or right and the dome

camera can be aimed in almost any direction from wherever you

choose to mount it. Check the image on your NVR and make

adjustments as necessary to ensure the best coverage.

5. Make sure the camera’s focal position is always facing up (you

will see UP indented on the camera) otherwise the image will be

upside down. When finished, tighten the lock screw to secure the

camera’s position.

6. Rotate the dome ring counter clockwise (if mounted

horizontally) or clockwise (if mounted vertically) to lock it in place.

Introduction

Congratulations on the purchase of your Swann Ultra

HD Camera.

• The camera has a cutting edge EXIR infrared

LED that emits a rectangular pattern for a more

crisp & even night vision image

• See everything with Swann’s 4K Ultra HD Day/

Night camera in a super wide 75° field of view,

allowing you to see detail you might otherwise

miss

• With discreet dome styling & sturdy aluminium

construction, the camera suits any conditions

with weather resistant rating of IP67 for indoor

& outdoor use

• This camera can only be used in combination

with Swann’s Ultra HD Network Video Record-

ers including NVR8-8000™ & NVR16-8000™ for

cutting-edge IP surveillance in amazing 4K

Important instructions

1. Make sure the camera is fixed correctly and stable

if fastened in place.

2. Never place strain of any kind on the network cable

connection. It’s designed to clip into the Ethernet port,

but it won’t support weight and can be broken.

3. Do not operate if wires and terminals are exposed.

Please note: Have a look at the camera location tips

included with your NVR, to select the best location for

your camera (the camera location tips provided here

are for general purpose only).

Important note: All jurisdictions have specific laws

and regulations relating to the use of cameras. Before

using any camera for any purpose, it is the buyer’s

responsibility to be aware of all applicable laws and

regulations that prohibit or limit the use of cameras.

1. Take into consideration what you want to monitor

and where you’ll get the best view of it.

2. How you’re going to connect the camera to your

monitoring system; remember that cables and

connections should be kept out of the weather.

3. How to keep the camera out of harm’s way. It’s

recommended to mount your camera at an elevated

position.

4. Place your camera as close to the area of interest

as practicable. The best position is from about

13ft/4m above looking slightly down, keeping in mind

the details you are looking for.

5. Although the sky looks nice when you look at the

live view from your camera, it is an unlikely direction

for an offender to approach. Make sure your camera

has minimal sky in it as the light in daylight can make

the foreground of the image darker.

6. Think about the most likely way a potential offender

may approach your home, use your camera to give

you the best coverage of these areas.

7. The camera’s casing is resistant to different

weather conditions and tampering. It would take an

overwhelming event to damage the housing.

8. Even though the camera is weather and water-

resistant, prolonged exposure to adverse weather

conditions such as sunlight or excessive moisture,

may eventually damage the internal components of

the camera and adversely affect its performance.

9. Run cables inside a wall cavity or other protected

enclosure, and ensure that all wiring and connectors

are insulated and protected from moisture.

10. Don’t put your cable near live electrical wiring. AC

electricity generates radio “noise” which can interfere

with the signal from your camera.

1 Connecting the Camera2 Mounting the Camera3 Camera Location Tips4

To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the

camera then plug the other end of the cable into one of the IP camera inputs on the back of your NVR.

AU DIO O UT

AU DIO I N

VGA

LAN

139 10

3 4

5 6

15 16

ALARM

OUT

1 2 3 4 G G G1

Power

Ethernet Cable

LAN

Dome Enclosure

Dome Ring

Please note: The power connector is provided as an alternative power option if required. Your NVR will

provide power over the Ethernet cable when connected and a separate power adapter is not required.

Mounting

Hole Lock Screw

Mounting

Hole

The camera can be mounted onto a flat

surface using the screws and wall plugs

provided. The surface must have sufficient

strength to hold the camera.

1. Rotate the dome ring counter clockwise

and lift it up to remove it from the camera.

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	NHD-881
Kleur van het product:	Wit
Gewicht:	634 g
Hoogte:	97 mm
Soort:	IP-beveiligingscamera
Gebruikershandleiding:	Ja
Materiaal behuizing:	Aluminium
Internationale veiligheidscode (IP):	IP67
Bluetooth:	Nee
Vormfactor:	Dome
Ondersteuning voor plaatsing:	Buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Montagewijze:	Plafond
Ondersteunde video-modi:	720p, 1080p, 2160p
Maximum resolutie:	3840 x 2160 Pixels
Totaal aantal megapixels:	8 MP
Diameter:	127 mm
Type stroombron:	Power over Ethernet (PoE)
Stroomuitvoer (volt):	12
Minimale belichting:	- Lux
Field of view (FOV) hoek:	75 °
Aantal cameras:	1
Meegeleverde kabels:	LAN (RJ-45)
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
LED-type:	IR
Volledige HD:	Ja
Interface:	RJ-45
Ingebouwde microfoon:	Nee
Power over Ethernet (PoE):	Ja
Inclusief schroeven:	Ja
Dag/nacht modus:	Ja
Weerbestendig:	Ja
Nachtkijker afstand:	40 m
Achtergrondverlichting compensatie:	Ja
Op afstand bekijken:	Ja
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-30 - 50 °C
Waarschuwingsstickers:	Ja