Swann NHD-880 Handleiding

Swann Bewakingscamera NHD-880

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann NHD-880 (3 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

5 6

Limited Warranty - Terms & Conditions

Swann Communications warrants this product

against defects in workmanship and material for

a period of one (1) year from its original purchase

date. You must present your receipt as proof of

purchase for warranty validation. Any unit which

proves defective during the stated period will

be repaired without charge for parts or labour

or replaced at the sole discretion of Swann. The

end user is responsible for all freight charges in-

curred to send the product to Swann’s repair cen-

tres. The end user is responsible for all shipping

costs incurred when shipping from and to any

country other than the country of origin.

The warranty does not cover any incidental, ac-

cidental or consequential damages arising from

the use of or the inability to use this product. Any

costs associated with the fitting or removal of this

product by a tradesman or other person or any

other costs associated with its use are the re-

sponsibility of the end user. This warranty applies

to the original purchaser of the product only and

is not transferable to any third party. Unauthor-

ized end user or third party modifications to any

component will render all warranties void. By law

some countries do not allow limitations on certain

exclusions in this warranty. Where applicable by

local laws, regulations and legal rights will take

precedence.

For Australia: Our goods come with guarantees

which cannot be excluded under Australian Con-

sumer Law. You are entitled to a replacement

or refund for a major failure and for compensa-

tion for any other reasonably foreseeable loss or

damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of ac-

ceptable quality.

M850880CAMVER1E

FCC Verification

This equipment has been tested and found to comply with the limits for Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) These devices may not cause harmful interference.

(2) These devices must accept any interference received, including interference that may cause

undesired operation.

Ultra HD

Security Camera

5MP and 4K HD Bullet Camera for

Ultra HD Network Video Recorders

EN INSTRUCTION MANUAL

Helpdesk/Technical Support

tech@swann.com

support.swann.com

USA & Canada 1800 627 2799

Australia 1800 788 210

New Zealand 0800 479 266

UK 0808 168 9031

Security Made Smarter

1 2 3 4

Congratulations on your purchase of this Swann

Ultra HD Network Video Camera. You’ve made

a fine choice for keeping a watchful eye over

your home or business. The camera delivers

brilliant and amazingly clear high definition

images and videos in both day and nighttime

conditions even in complete darkness. Designed

in an elegant, unobtrusive weatherproof casing

with an integrated 3-axis mounting bracket,

the camera is versatile enough to be installed

on walls and ceilings - indoors or outdoors and

will be an excellent addition to your Swann NVR

monitoring solution.

Note: This manual covers both the 5MP and 4K

camera models.

Important note - All jurisdictions have specific

laws and regulations relating to the use of

cameras. Before using an y camera for any

purpose, it is the buyer’s responsibility to be

aware of all applicable laws and regulations that

prohibit or limit the use of cameras.

Important safety instructions

1) Make sure the camera is fixed correctly and

stable if fastened in place.

2) Do not operate if wires and terminals are

exposed.

3) Never place strain of any kind on the network

cable connection. It’s designed to clip into place to

prevent slippage, but it won’t support any weight

and can be easily broken by a sharp tug. Exercise

caution.

Warning - Modifications not approved by the party

responsible for compliance could void user’s

authority to operate the equipment.

Introduction Connecting your Camera

Some things to consider when choosing a location -

1) What you want to monitor and where you’ll get the

best view of it.

2) How you’re going to connect the camera to your

monitoring system; remember that ca bles and

connections shou ld be kept out of the weather.

3) It’s recommended to mount your camera at an

elevated position to minimise harm.

4) Place your camera as close to the area of interest

as practicable. The best position is from about 4m

(13ft) above looking slightly down, keeping in mind

the details you are looking for.

5) Although the sky looks nice when you look at the

live view from your camera, it is an unlikely direction

for an offender to approach, make sure your camera

has minimal sky in it as the light in daylight can make

the foreground of the image darker.

6) Think about the most likely way a potential offender

may approach your home, use your cameras to give

you the best coverage of these areas.

7) The camera’s casing is resistant to water, different

weather conditions and tampering. It would take

an overwhelming event of this kind to damage the

housing of the camera. However, the cable and

connector are vulnerable and require protection.

8) Even though the camera is weather and water-

resistant, prolonged exposure to adverse weather

conditions such as sunlight or excessive moisture,

may eventually damage the internal components of

the camera and adversely affect its performance.

9) Avoid bending your cables at sharp angles.

10) If you install the camera outside of your home,

we highly recommend using waterproof tape

to wrap the cable connection area between the

camera’s network (LAN) port and the extension

cable’s Ethernet plug, as shown below. Use as

much as is necessary for the layer of tape to

protect the connection. This will help prevent

water or moistuire from leaking into the cable

which can cause the network cable connection to

degrade over time or stop working.

Mounting your Camera Camera Location Tips

To connect your camera to the NVR, simply connect the supplied Ethernet cable to the LAN connection on

the camera then plug the other end of the cable into one of the IP camera inputs on the back of the NVR.

The Ethernet cable is the same at both ends so it doesn’t matter which end plugs into the camera or the NVR.

Note: The DC Power connector is provided as an alternative power option if required. The NVR will provide PoE

power over the network cable when connected as described above and in this case the DC Power is not needed.

The camera can be mounted onto a flat surface using screws. The surface must have sufficient

strength to hold the camera.

• Position the camera in the location you want to mount it, and

mark the screw holes on the surface to position the screws.

Then, using appropriate screws for the surface you’re fixing the

camera to, secure the camera into place.

• If you’re mounting to a wooden surface, then screw the camera

directly to the surface.

• If you’re mounting to a masonry surface (bricks, concrete or

similar), then you’ll need to use wall plugs.

Adjusting the camera angle

• Loosening the locking ring will allow you to pan, tilt and rotate

the camera.

• Remember to tighten the locking ring back securely to lock the

camera’s position in place after you’ve finished adjusting the

viewing angle of the camera.

4321

9 10 11 12

5 6 7 8

16151413 AUDIO OUT

AUDIO IN

VGA

LAN

POE

Ethernet cable

LAN

DC Power

Camera

Unscrew the compartment

lid underneath the camera

body using the supplied tool

to access the Reset button if

required.

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	NHD-880
Kleur van het product:	Wit
Gewicht:	413 g
Soort:	IP-beveiligingscamera
Gebruikershandleiding:	Ja
Materiaal behuizing:	Aluminium
Internationale veiligheidscode (IP):	IP67
Bluetooth:	Nee
Vormfactor:	Rond
Ondersteuning voor plaatsing:	Buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Montagewijze:	Plafond/muur
Ondersteunde video-modi:	720p, 1080p, 2160p
Maximum resolutie:	3840 x 2160 Pixels
Totaal aantal megapixels:	8 MP
Diameter:	64 mm
Type stroombron:	Power over Ethernet (PoE)
Stroomuitvoer (volt):	12
Minimale belichting:	- Lux
Field of view (FOV) hoek:	75 °
Aantal cameras:	1
Meegeleverde kabels:	LAN (RJ-45)
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
LED-type:	IR
Volledige HD:	Ja
Interface:	RJ-45
Ingebouwde microfoon:	Nee
Lengte:	155 mm
Power over Ethernet (PoE):	Ja
Inclusief schroeven:	Ja
Dag/nacht modus:	Ja
Weerbestendig:	Ja
Nachtkijker afstand:	30 m
Infrarood (IR)-afsluitingsfilter:	Ja
Achtergrondverlichting compensatie:	Ja
Op afstand bekijken:	Ja
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-30 - 50 °C