Supermicro X9DRG-HF Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro X9DRG-HF (109 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/109
USER’S MANUAL
Revision 1.0a
X9DRG-HF
X9DRG-HTF
Manual Revision 1.0a
Release Date: May 20, 2013
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2013 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
This manu al is writt en fo r sys tem in tegr ators , PC te chn icia ns a nd
knowledgeable PC users. It provides information for the installation and use of the
X9DRG-HF/X9DRG-HTF motherboard.
About This Motherboard
The Super X9DRG-HF/X9DRG-HTF motherboard supports dual Intel E5-2600 Se-
ries Processors (Socket R) which offers QPI (Intel QuickPath Interface) Technology
(V.1.1) providing point-to-point connection with a transfer speed of up to 8.0 TG/s.
With the PCH C602 chipset built in, the X9DRG-HF/HTF motherboard supports
Intel® Intelligent Power Node Manager, Manageability Engine (ME), Rapid Storage
Technology, Digital Media Interface (DMI), PCI-E Gen. 3.0 and 1600 MHz DDR3
memory. This motherboard is ideal for GPU 1U/2U server platforms. Please refer
to our Website (http://www.supermicro.com) for CPU and memory support updates.
Manual Organization
Chapter 1 describes the features, speciî‚żcations and performance of the mother-
board, and provides detailed information about the Intel PCH chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory, and system setup stored in CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Software Installation Instructions.
Preface
iii


Product specificaties

Merk: Supermicro
Categorie: Moederbord
Model: X9DRG-HF
Breedte: 503 mm
Diepte: 234 mm
Ethernet LAN: Ja
Aantal USB 2.0-poorten: 2
VGA (D-Sub)poort(en): 1
Aantal Ethernet LAN (RJ-45)-poorten: 2
Duurzaamheidscertificaten: RoHS
Processor socket: LGA 2011 (Socket R)
PCI Express slots versie: 2.0, 3.0
Processorfabrikant: Intel
On-board graphics adapter model: Matrox G200eW
ECC: Ja
Ethernet interface type: Gigabit Ethernet
Chipset moederbord: Intel® C602
PCI Express x16 slots: 4
Ondersteunde opslagstationinterfaces: SATA II, SATA III
PS/2 poort(en): 1
PCI Express x8 slots: 1
PCI Express x4 slots: 1
Component voor: Server
Geheugen voltage: 1.35, 1.5 V
Soorten RAID: 0, 1,5, 10
Non-ECC: Ja
Aantal ondersteunde processoren: 2
Intel® Xeon series: E5-2600
Maximum UDIMM geheugen: 64 GB
Aantal DIMM sloten: 8
Ondersteunende RDIMM klok snelheden: 800,1066,1333,1600 MHz
Ondersteunend DIMM module capaciteiten: 16GB, 1GB, 2GB, 32GB, 4GB, 8GB
Ondersteunde geheugen types: DDR3-SDRAM
Bedrijfstemperatuur (T-T): 10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 8 - 90 procent
Supported memory clock speeds: 800,1066,1333,1600 MHz
BIOS type: AMI
Grootte BIOS-geheugen: 128 Mbit
ACPI version: 3.0
USB 2.0 aansluitingen: 2
IPMI LAN (RJ-45) port: Ja
Supported QPI: 8 GT/s

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro X9DRG-HF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden