Supermicro X9DRE-LN4F Handleiding
Supermicro
Moederbord
X9DRE-LN4F
Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro X9DRE-LN4F (107 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/107
USER’S MANUAL
Revision 1.0
X9DR7-LN4F
X9DRE-LN4F
X9DR7-JLN4F
Manual Revision 1.0
Release Date: June 28, 2012
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2012 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
This manu al i s wri tte n for sys tem i nte grat ors , PC te chn ici ans and
knowledgeable PC users. It provides information for the installation and use of the
X9DR7-LN4F/X9DR7-JLN4F/X9DRE-LN4F motherboard.
About This Motherboard
The Super X9DR7-LN4F/X9DR7-JLN4F/X9DRE-LN4F motherboard supports
dual Intel® E5-2600 Series Processors (Socket R) that offer QPI (Intel QuickPath
Interface) Technology (V.1.1), providing point-to-point connection with a transfer
speed of up to 8.0 TG/s. With the PCH C602 chipset built in, the X9DR7/E series
motherboard supports Intel® Manageability Engine (ME), Rapid Storage Technol-
ogy, Digital Media Interface (DMI), PCI-E Gen. 3.0 and 1600 MHz DDR3 memory.
This motherboard is ideal for high-end server platforms. Please refer to our Website
(http://www.supermicro.com) for CPU and memory support updates.
Manual Organization
Chapter 1 describes the features, speciî‚żcations and performance of the mother-
board, and provides detailed information about the Intel PCH C602 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Software Installation Instructions.
Preface
iii
Product specificaties
Merk: | Supermicro |
Categorie: | Moederbord |
Model: | X9DRE-LN4F |
Breedte: | 305 mm |
Diepte: | 332 mm |
Ethernet LAN: | Ja |
Aantal USB 2.0-poorten: | 4 |
VGA (D-Sub)poort(en): | 1 |
Aantal Ethernet LAN (RJ-45)-poorten: | 5 |
Duurzaamheidscertificaten: | RoHS |
Temperatuur bij opslag: | -40 - 70 °C |
Processor socket: | LGA 2011 (Socket R) |
PCI Express slots versie: | 3.0 |
Processorfabrikant: | Intel |
Maximum intern geheugen: | 512 GB |
On-board graphics adapter model: | Matrox G200eW |
Luchtvochtigheid bij opslag: | 5 - 95 procent |
Type behuizing: | 2U, 3U |
PCI Express sleufhoeveelheid: | 6 |
ECC: | Ja |
Ethernet interface type: | Gigabit Ethernet |
Chipset moederbord: | Intel® C602 |
Intel® vPro™ Platform Eligibility: | Nee |
PCI Express x16 slots: | 2 |
Ondersteunde opslagstationinterfaces: | SATA II, SATA III |
Seriële poort(en): | 1 |
PCI Express x8 slots: | 4 |
Component voor: | Server |
Geheugen voltage: | 1.35, 1.5 V |
LAN controller: | Intel I350-CM2, Realtek RTL8201N |
Soorten RAID: | 0, 1,5, 10 |
Aantal SATA III connectors: | 2 |
Non-ECC: | Ja |
Aantal ondersteunde processoren: | 2 |
Intel® Xeon series: | E5-2600 |
Maximum UDIMM geheugen: | 128 GB |
Aantal DIMM sloten: | 16 |
Ondersteunend DIMM module capaciteiten: | 16GB, 1GB, 2GB, 32GB, 8GB |
Ondersteunde geheugen types: | DDR3-SDRAM |
Wifi: | Nee |
Bedrijfstemperatuur (T-T): | 10 - 35 °C |
Relatieve vochtigheid in bedrijf (V-V): | 8 - 90 procent |
Moederbord form factor: | Verlengd ATX |
Supported memory clock speeds: | 800,1066,1333,1600 MHz |
BIOS type: | AMI |
Grootte BIOS-geheugen: | 16 Mbit |
ACPI version: | 4.0 |
Ondersteuning voor parallel processing: | Niet ondersteund |
Aansluiting voor CPU koeler: | Ja |
Aansluitingen voor behuizingsventilatoren: | 8 |
ATX Power connector (24-pin): | Ja |
Aantal SATA-aansluitingen: | 10 |
USB 2.0 aansluitingen: | 2 |
TPM connector: | Ja |
Chassis intrusion aansluiting: | Ja |
Processor thermaal vermogen (max): | 135 W |
Aantal SATA II connectors: | 8 |
EPS power connector (8-pin): | Ja |
Serial port headers: | 1 |
Intelligent Platform Management Interface (IPMI) support: | Ja |
IPMI LAN (RJ-45) port: | Ja |
Processor aantal cores ondersteund: | 8 |
Supported QPI: | 8 GT/s |
Lithografie: | 32 nm |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X9DRE-LN4F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024