Supermicro X9DR7-TF+ Handleiding
Supermicro
Moederbord
X9DR7-TF+
Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro X9DR7-TF+ (111 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/111
USER’S MANUAL
Revision 1.0
X9DR7-TF+
X9DRE-TF+
Manual Revision 1.0
Release Date: June 28, 2012
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2012 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
This manu al i s wri tten for s yst em in tegra tors , PC t ech nicians and
knowledgeable PC users. It provides information for the installation and use of the
X9DR7-TF+/X9DRE-TF+ motherboard.
About This Motherboard
The Super X9DR7-TF+/X9DRE-TF+ motherboard supports dual Intel
® E5-2600
Series Processors (Socket R) that offer QPI (Intel QuickPath Interface) Technology
(V.1.1), providing point-to-point connection with a transfer speed of up to 8.0 TG/s.
With the PCH C602J chipset built in, the X9DR7/E-TF+ motherboard supports In-
tel® Management Engine (ME), Rapid Storage Technology, Digital Media Interface
(DMI), PCI-E Gen. 3.0 and 1600 MHz DDR3 memory. This motherboard is ideal
for HPC/Cluster/Database 2U server platforms. Please refer to our Website (http://
www.supermicro.com) for CPU and memory support updates.
Manual Organization
Chapter 1 describes the features, speciî‚żcations and performance of the mother-
board, and provides detailed information about the Intel PCH C602J chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Software Installation Instructions.
Preface
iii
Product specificaties
Merk: | Supermicro |
Categorie: | Moederbord |
Model: | X9DR7-TF+ |
Breedte: | 347305 mm |
Diepte: | 330 mm |
Ethernet LAN: | Ja |
Aantal USB 2.0-poorten: | 4 |
VGA (D-Sub)poort(en): | 1 |
Aantal Ethernet LAN (RJ-45)-poorten: | 2 |
Duurzaamheidscertificaten: | RoHS |
Processor socket: | LGA 2011 (Socket R) |
PCI Express slots versie: | 3.0 |
Processorfabrikant: | Intel |
Maximum intern geheugen: | 768 GB |
On-board graphics adapter model: | Matrox G200 |
ECC: | Ja |
Ethernet interface type: | Gigabit Ethernet |
Chipset moederbord: | Intel® C602J |
PCI Express x16 slots: | 2 |
Geheugen kanaal: | Dubbelkanaals |
Ondersteunde opslagstationinterfaces: | SATA II, SATA III |
PS/2 poort(en): | 1 |
Seriële poort(en): | 1 |
PCI Express x8 slots: | 4 |
Component voor: | Server |
Geheugen voltage: | 1.35, 1.5 V |
LAN controller: | Intel® X540 |
Soorten RAID: | 0, 1,5, 10 |
Aantal SATA III connectors: | 2 |
Non-ECC: | Ja |
Aantal ondersteunde processoren: | 2 |
Intel® Xeon series: | E5-2600 |
Maximum UDIMM geheugen: | 768 GB |
Aantal DIMM sloten: | 24 |
Ondersteunde geheugen types: | DDR3-SDRAM |
Wifi: | Nee |
Moederbord form factor: | Verlengd ATX |
Supported memory clock speeds: | 1066,1333,1600 MHz |
BIOS type: | AMI |
Grootte BIOS-geheugen: | 128 Mbit |
ACPI version: | 4.0 |
Aansluitingen voor behuizingsventilatoren: | 8 |
Aantal SATA-aansluitingen: | 6 |
USB 2.0 aansluitingen: | 5 |
TPM connector: | Ja |
Chassis intrusion aansluiting: | Ja |
Processor thermaal vermogen (max): | 135 W |
Aantal SATA II connectors: | 4 |
Serial port headers: | 1 |
Intelligent Platform Management Interface (IPMI) support: | Ja |
IPMI LAN (RJ-45) port: | Ja |
Processor aantal cores ondersteund: | 6, 8 |
Ondersteunende UDIMM module capaciteit: | 16GB, 1GB, 2GB, 32GB, 4GB, 8GB |
Supported QPI: | 8 GT/s |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X9DR7-TF+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
16 November 2024
16 November 2024
15 November 2024
14 November 2024
13 November 2024
12 November 2024
8 November 2024
8 November 2024
8 November 2024
8 November 2024