Supermicro X9DBL-i Handleiding
Supermicro
Moederbord
X9DBL-i
Lees hieronder de š handleiding in het Nederlandse voor Supermicro X9DBL-i (113 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/113
USERāS MANUAL
Revision 1.0c
X9DBL-3
X9DBL-3F
X9DBL-i
X9DBL-iF
Manual Revision 1.0c
Release Date: May 23, 2013
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright Ā© 2013 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this Userās Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturerās instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. āPerchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorateā.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
X9DBL-i/3/iF/3F Motherboard Userās Manual
Preface
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X9DBL-i/3/iF/3F motherboard.
About This Motherboard
The Super X9DBL-i/3/iF/3F motherboard supports dual Intel E5-2400 Series
(Socket B2) processors and Intel QPI (QuickPath Interface) Technology (V.1.1),
providing point-to-point connections with transfer speeds of up to 8.0 TG/s. With
the C606/C602 chipset built in, the X9DBL-i/3/iF/3F motherboard supports IntelĀ®
Manageability Engine (ME), Rapid Storage Technology, Digital Media Interface
(DMI), PCI-E Gen. 3.0, and DDR3 memory of up to 1600 MHz. These features
greatly enhance system performance. This motherboard is ideal for high-end server
platforms. Please refer to our Website at http://www.supermicro.com for processor
and memory support.
Manual Organization
Chapter 1 describes the features, speciļ¬ cations and performance of the mother-
board. It also provides detailed information on the Intel C606/C602 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules, and other hardware components into the
system. If you encounter any problems, see , which describes trouble-Chapter 3
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software installation instructions.
Preface
iii
Product specificaties
Merk: | Supermicro |
Categorie: | Moederbord |
Model: | X9DBL-i |
Breedte: | 304.8 mm |
Diepte: | 254 mm |
Ethernet LAN: | Ja |
Aantal USB 2.0-poorten: | 7 |
VGA (D-Sub)poort(en): | 1 |
Aantal Ethernet LAN (RJ-45)-poorten: | 2 |
Temperatuur bij opslag: | -40 - 70 Ā°C |
Processor socket: | LGA 1356 (Socket B2) |
Processorfabrikant: | Intel |
Maximum intern geheugen: | 384 GB |
Luchtvochtigheid bij opslag: | 5 - 95 procent |
ECC: | Ja |
Ethernet interface type: | 10 Gigabit Ethernet, Fast Ethernet |
Chipset moederbord: | IntelĀ® C602 |
PCI Express x1 slots: | 1 |
PCI Express x16 (Gen 3.x) slots: | 1 |
PCI Express x4 (Gen 3.x) slots: | 1 |
Ondersteunde opslagstationinterfaces: | SATA II, SATA III |
Seriƫle poort(en): | 2 |
Component voor: | Server |
Geheugen voltage: | 1.35, 1.5 V |
LAN controller: | IntelĀ® 82574L |
Soorten RAID: | 0, 1,5, 10 |
PCI Express x8 (Gen 3.x) slots: | 3 |
Aantal SATA III connectors: | 2 |
Non-ECC: | Ja |
IntelĀ® Xeon series: | E5-2400 |
Aantal DIMM sloten: | 6 |
Ondersteunend DIMM module capaciteiten: | 16GB, 1GB, 2GB, 32GB, 4GB, 8GB |
Ondersteunde geheugen types: | DDR3-SDRAM |
Wifi: | Nee |
Bedrijfstemperatuur (T-T): | 10 - 35 Ā°C |
Relatieve vochtigheid in bedrijf (V-V): | 8 - 90 procent |
Supported memory clock speeds: | 800,1066,1333,1600 MHz |
BIOS type: | AMI |
Grootte BIOS-geheugen: | 64 Mbit |
ACPI version: | 4.0 |
Aantal SATA II connectors: | 4 |
Supported QPI: | 8 GT/s |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X9DBL-i stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
16 November 2024
16 November 2024
15 November 2024
14 November 2024
13 November 2024
12 November 2024
8 November 2024
8 November 2024
8 November 2024
8 November 2024