Supermicro X8SAX Handleiding
Supermicro
Moederbord
X8SAX
Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro X8SAX (101 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/101
USER’S MANUAL
Revision 1.2a
X8SAX
C7X58
Manual Revision 1.2a
Release Date: September 23, 2010
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2010 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall be
the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims
will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause interference with radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/television technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
This manual is w ritten f o r system i n tegrator s , PC tec h n i cians and
knowledgeable PC users. It provides information for the installation and use of the
X8SAX/C7X58 motherboard.
About This Motherboard
The X8SAX/C7X58 supports the Intel® Core™ i7 / i7 Extreme Edition, and
Intel® Xeon® 5500/3500 series processors. Xeon® 5600/3600 series processors
are supported on PCB Rev. 2.0 with BIOS 2.0 and above. It is the î‚żrst platform that
supports the Intel QuickPath Interconnect technology, providing the next genera-
tion point-to-point system interface, replacing the current Front Side Bus. With the
Intel X58 Express Chipset platform built-in, the X8SAX/C7X58 offers substantial
enhancement in system performance with increased bandwidth and unprecedented
scalability, optimized for intensive-applications and high-end workstations. Please
refer to our web site (http://www.supermicro.com/products/) for updates on sup-
ported processors.
This product is intended to be installed and serviced by professional technicians.
Manual Organization
Chapter 1 describes the features, speciî‚żcations and performance of the mother-
board and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Other Software Program Installation
Appendix C provides BIOS Recovery Instructions.
Preface
iii
Product specificaties
Merk: | Supermicro |
Categorie: | Moederbord |
Model: | X8SAX |
Breedte: | 3050 mm |
Diepte: | 2540 mm |
Type stroombron: | ATX |
Aantal USB 2.0-poorten: | 12 |
Aantal Ethernet LAN (RJ-45)-poorten: | 2 |
Processor socket: | Socket B (LGA 1366) |
Processorfabrikant: | Intel |
Maximum intern geheugen: | 24 GB |
Audio-uitgangskanalen: | 7.1 kanalen |
ECC: | Ja |
Audiochip: | Realtek ALC883 |
PCI Express x16 slots: | 2 |
PS/2 poort(en): | 2 |
Seriële poort(en): | 2 |
PCI Express x4 slots: | 1 |
Geheugen voltage: | 1.5 V |
LAN controller: | Intel® 82574L |
Soorten RAID: | 0, 1,5, 10 |
Non-ECC: | Ja |
Bedrijfstemperatuur (T-T): | 10 - 35 °C |
Relatieve vochtigheid in bedrijf (V-V): | 8 - 90 procent |
PCI-X slots: | 2 |
Moederbord form factor: | ATX |
Aantal geheugenslots: | 6 |
Grootte BIOS-geheugen: | 32 Mbit |
Aantal SATA-aansluitingen: | 6 |
USB 2.0 aansluitingen: | 12 |
Soort aansluiting controller: | SATA |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X8SAX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
16 November 2024
16 November 2024
15 November 2024
14 November 2024
13 November 2024
12 November 2024
8 November 2024
8 November 2024
8 November 2024
8 November 2024