Supermicro X8DTU-6F+ Handleiding

Supermicro Moederbord X8DTU-6F+

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X8DTU-6F+ (111 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/111

USER’S MANUAL

Revision 1.0a

X8DTU-6F+

X8DTU-6TF+

X8DTU-6F+-LR

X8DTU-6TF+-LR

Manual Revision 1.0a

Release Date: Oct. 11, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

X8DTU-6F+/X8DTU-6TF+/X8DTU-6(T)F+-LR motherboard.

About This Motherboard

The X8DTU-6F+/X8DTU-6TF+/X8DTU-6(T)F+-LR motherboard supports

the Intel 5500/5600 Series processors, the ﬁ rst dual-processing platform that sup-

ports the Intel QuickPath Interconnect (QPI) Technology, providing the next genera-

tion point-to-point system interface to replace the current Front Side Bus. With the

5500/5600 Series processors built in, the X8DTU-6F+/X8DTU-6TF+/X8DTU-6(T)

F+-LR motherboard substantially enhances system performance in a small form-

factor package. Please refer to our website (http://www.supermicro.com/products/)

for updates on supported processors. This product is intended to be installed and

serviced by professional technicians.

Manual Organization

Chapter 1 provides quick installation instructions.

Chapter 2 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the 5520 chipset.

Chapter 3 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 4

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 5 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists Other Software Program Installation Instructions.

Preface

iii

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X8DTU-6F+
Breedte:	325 mm
Diepte:	419 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Intern geheugentype:	DIMM
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	Socket B (LGA 1366)
Systeembus:	6.4 GT/s
PCI Express slots versie:	2.0
Processorfabrikant:	Intel
Maximum intern geheugen:	288 GB
Ingebouwde grafische adapter:	Ja
On-board graphics adapter model:	Matrox G200eW
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	1U, 2U
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5520
PCI Express x16 slots:	1
Ondersteunde opslagstationinterfaces:	Serial Attached SCSI (SAS)
Seriële poort(en):	1
PCI Express x4 slots:	1
Component voor:	Server
Geheugen voltage:	1.35, 1.5 V
LAN controller:	Intel® 82576
Soorten RAID:	0, 1,5, 10
Non-ECC:	Ja
Aantal ondersteunde processoren:	2
Intel® Xeon series:	5000
Aantal DIMM sloten:	18
Ondersteunend DIMM module capaciteiten:	16GB, 1GB, 2GB, 4GB, 8GB
Ondersteunde geheugen types:	DDR3-SDRAM
Moederbord southbridge:	Intel ICH10R
Wifi:	Nee
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Supported memory clock speeds:	800,1066,1333 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	32 Mbit
ACPI version:	3.0
Ondersteuning voor parallel processing:	Niet ondersteund
Aansluitingen voor behuizingsventilatoren:	8
USB 2.0 aansluitingen:	6
Chassis intrusion aansluiting:	Ja
Aantal SATA II connectors:	6
Serial port headers:	1
IPMI LAN (RJ-45) port:	Ja
Processor aantal cores ondersteund:	4