Supermicro X7SPE-H-D525 Handleiding

Supermicro Moederbord X7SPE-H-D525

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7SPE-H-D525 (107 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/107

X7SPA-L

USER’S MANUAL

Revision 1.2c

X7SPA-H

X7SPA-HF

X7SPE-HF

X7SPE-H

X7SPE-HF-D525

X7SPE-H-D525

X7SPA-H-D525

X7SPA-HF-D525

Manual Revision 1.2c

Release Date: January 10, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their

respective companies or mark holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, you are encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

iii

Preface

About This Manual

This manua l is wri tten for sys tem int egra tors , PC tech nic ians and

knowledgeable PC users. It provides information for the installation and use of the

X7SPA and X7SPE motherboard product series. This product is intended

to be professionally installed and serviced by a technician.

About This Motherboard

The X7SPA and X7SPE motherboard product series are value-driven products

aimed at users who demand a reduced-cost, low-power motherboard for PC or

storage server applications.

The X7SPA and X7SPE series come in different model variations with different

CPU support. The X7SPA-L features a single-core Intel® ATOM

TM D410 (1.66GHz,

10.0W) processor, while the X7SPA-H, X7SPA-HF, X7SPE-H, and X7SPE-HF sup-

ports the Intel ATOM D510 (Dual Core, 1.66GHz, 13.0W) processor. In addition,

four other models, the X7SPE-H-D525, X7SPA-HF-D525, X7SPA-H-D525 and the

X7SPE-HF-D525 are equipped with the Intel ATOM D525 (Dual Core, 1.8GHz,

13W) processor. Depending on the particular model, X7SPA and X7SPE series

also offer several conguration choices, including memory up to 4GB (non-ECC

SO-DIMM), up to 6 SATA ports, an on-board VGA, and up to 10 USB 2.0 ports.

These enable the X7SPA and X7SPE series to deliver cost-effective performance

in a small form- factor package.

This wide selection of processors and options make the X7SPA and X7SPE series

an excellent choice for system builders looking to standardize on a particular moth-

erboard line, at cost-effective price points.

Manual Organization

Chapter 1 describes the features, specications and performance of the mainboard

and provides detailed information about the chipset. provides hardware Chapter 2

installation instructions. Read this chapter when installing the processor, memory

modules and other hardware components into the system. If you encounter any

problems, see , which describes troubleshooting procedures for video, Chapter 3

memory and system setup stored in the CMOS. includes an introduction Chapter 4

to the BIOS and provides detailed information on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes. lists Driver InstallaAppendix B -

tion Instructions.

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7SPE-H-D525
Breedte:	190.5 mm
Diepte:	171.5 mm
Processormodel:	D525
Grafische adapter:	GMA 3150
Ethernet LAN:	Ja
Type stroombron:	ATX
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	RoHS, FCC Class B
Meegeleverde software:	SuperDoctor® III\r\nWatch Dog
Ondersteunt Windows:	Ja
Temperatuur bij opslag:	-40 - 70 °C
Processorfabrikant:	Intel
Maximum intern geheugen:	4 GB
Ingebouwde grafische adapter:	Ja
Luchtvochtigheid bij opslag:	5 - 95 procent
Audio-uitgangskanalen:	- kanalen
Ethernet interface type:	Gigabit Ethernet
Geheugen slots type:	SO-DIMM
Grafische adapter-familie:	Intel
Geheugen kanaal:	Eenkanaals
Ondersteunde opslagstationinterfaces:	SATA II
PS/2 poort(en):	2
Seriële poort(en):	1
PCI Express x4 slots:	1
Component voor:	PC
Geheugen voltage:	1.5 V
LAN controller:	Intel® 82574L
Soorten RAID:	0, 1,5, 10
Geheugen bandbreedte (max):	3 GB/s
Non-ECC:	Ja
Compatibele processors:	Intel Atom®
Ondersteunde geheugen types:	DDR3-SDRAM
Bedrijfstemperatuur (T-T):	0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Moederbord chipset familie:	Intel
Moederbord form factor:	Flex-ATX
Supported memory clock speeds:	800 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	64 Mbit
ACPI version:	3.0
Aansluiting voor ventilator van voeding:	Ja
Aantal SATA-aansluitingen:	6
USB 2.0 aansluitingen:	6
Niet gebufferd geheugen:	Ja
Aantal SATA II connectors:	6
Ondersteunde geheugenmodule capaciteiten:	1GB, 256MB, 2GB, 512MB
Serial port headers:	1