Supermicro X7SBI Handleiding

Supermicro Moederbord X7SBI

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7SBI (101 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/101

X7SBi

USER’S MANUAL

Revision 1.1

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our website at www.supermicro.com.

SUPER MICRO COMPUTER, INC. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.1

Release Date: October 1, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manu al is wr itten for sy st em in tegrat or s, PC te chni ci ans and

knowledgeable PC users. It provides information for the installation and use of the

X7SBi motherboard. The X7SBi supports a Quad Core/Dual Core Intel®

Xeon 3000 Series/3200 Series Processor at system bus speeds of 1333/1066/800

MHz. With the Intel Xeon 3000 Series/3200 Series Processor and the 3210 Chipset

built in, the X7SBi offers unprecedented energy efciency performance and provides

optimized low-power, 64-bit computing solutions for single/uni-processor (UP) sys-

tems based on the Intel Core microarchitecture. With support of Intel Virtualization

Technology, Intel Extended Memory 64 Technology, and the Enhanced Intel Speed-

step Technology, the X7SBi delivers server platforms that are reliable, easy-to-use,

environmentally-friendly, and very economical in TCO (Total Cost of Ownership).

Please refer to the motherboard specications pages on our website (http://www.su-

permicro.com/Product) for updates or visit Intel's website for processor support. This

product is intended to be professionally installed and serviced by a technician.

Manual Organization

Chapter 1 describes features, specications and performance of the X7SBi

mainboard and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for the video, the memory and the system setup.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A lists BIOS POST Error Beep Codes.

Appendix B provides Intel ICH9R SATA RAID Setup Guidelines.

Appendix C lists Other Software Driver and Program Installation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation or

to prevent damage to the components.

Note: Additional Information given to differentiate various models or to ensure cor-

rect system setup.

Preface

iii

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7SBI
Breedte:	304.8 mm
Diepte:	243.8 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	LGA 775 (Socket T)
Processorfabrikant:	Intel
Maximum intern geheugen:	8 GB
On-board graphics adapter model:	AMD ES1000
Luchtvochtigheid bij opslag:	5 - 95 procent
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 3210
RAID support:	Ja
Geheugen kanaal:	Dubbelkanaals
Ondersteunde opslagstationinterfaces:	IDE/ATA
PS/2 poort(en):	2
Seriële poort(en):	2
PCI Express x8 slots:	1
Geheugen voltage:	1.8 V
Soorten RAID:	1, 5,10
Non-ECC:	Ja
Wake-on-LAN:	Ja
PCI-slots:	1
Aantal ondersteunde processoren:	1
Intel® Xeon series:	X3200,3000,X3300
Aantal DIMM sloten:	4
Ondersteunend DIMM module capaciteiten:	1GB, 256MB, 2GB, 512MB
Parallelle poort(en):	1
Ondersteunde geheugen types:	DDR2-SDRAM
Wifi:	Nee
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
PCI-X slots:	1
Moederbord form factor:	ATX
Supported memory clock speeds:	667,800 MHz
BIOS type:	EEPROM
Grootte BIOS-geheugen:	16 Mbit
ACPI version:	2.0
Aantal SATA-aansluitingen:	6
USB 2.0 aansluitingen:	6
Chassis intrusion aansluiting:	Ja
On-board graphics adapter geheugen:	32 MB
Processor aantal cores ondersteund:	2, 4