Supermicro X7DWU Handleiding

Supermicro Moederbord X7DWU

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7DWU (117 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/117

SUPER

X7DWU

USER’S MANUAL

Revision 1.0c

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY

FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT,

INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RE-

COVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, you are encouraged to try to correct the interference by one or more of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0c

Release Date: June. 15, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for system integrators, PC technicians and knowledgeable

PC users. It provides information for the installation and use of the X7DWU

motherboard. The X7DWU supports dual Intel® Quad-Core/Dual-Core

Xeon™ 5400 Series/5300LV Series/5200 Series/5100LV Series processors with a

front side bus speed of up to 1.60 GHz. With two 64-bit Quad-Core or Dual-Core

processors built-in, the X7DWU offers substantial functionality enhancements to

the motherboards based on the Intel Core Microarchitecture core while remaining

compatible with the IA-32 software. The X7DWU supports Intel Virtualization Tech-

nology, Enhanced Intel SpeedStep technology, Advanced Dynamic Execution, and

Streaming SIMD Extensions 4.1 (SSE4.1). These features allow the motherboard

to operate at much higher speeds with better power management in much safer

thermal environments than the traditional motherboards. The X7DWU is ideal for

high performance workstation and enterprise server environments. Please refer

to our web site (http://www.supermicro.com/products/) for updates on supported

processors. This product is intended to be installed and serviced by professional

technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the main board

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A provides BIOS POST Error Codes. Appendix B, Appendix C and

Appendix D list HostRAID Setup Guidelines and Other Software Program/Driver

Installation Instructions.

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation

and to prevent damage done to the components or injury to yourself:

Warning: Important information given to ensure proper system installation or

to prevent damage to the components.

Note: Additional Information given to ensure correct system setup.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7DWU
Breedte:	3320 mm
Diepte:	306.7 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	LGA 771 (Socket J)
Processorfabrikant:	Intel
Maximum intern geheugen:	64 GB
On-board graphics adapter model:	AMD ES1000
Luchtvochtigheid bij opslag:	5 - 95 procent
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5400
RAID support:	Ja
Ondersteunde opslagstationinterfaces:	IDE/ATA
PS/2 poort(en):	2
Seriële poort(en):	1
Geheugen voltage:	1.5, 1.8 V
LAN controller:	Intel® 82575EB
Soorten RAID:	0, 1,5, 10
Wake-on-LAN:	Ja
Aantal ondersteunde processoren:	2
Intel® Xeon series:	5000,5300,5400
Aantal DIMM sloten:	8
Ondersteunend DIMM module capaciteiten:	1GB, 256MB, 2GB, 4GB, 512MB, 8GB
Ondersteunde geheugen types:	DDR2-SDRAM
Ondersteuning voor processor FSB:	1066,1333,1600 MHz
Wifi:	Nee
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
PCI Express x8 (Gen 2.x) slots:	2
Moederbord form factor:	ATX
Supported memory clock speeds:	533,667,800 MHz
BIOS type:	EEPROM
Grootte BIOS-geheugen:	16 Mbit
ACPI version:	2.0
Aantal SATA-aansluitingen:	6
USB 2.0 aansluitingen:	3
Chassis intrusion aansluiting:	Ja
PCI Express x16 (Gen 2.x) slots:	1
Serial port headers:	1
On-board graphics adapter geheugen:	32 MB
Processor aantal cores ondersteund:	2, 4