Supermicro X7DVL-3 Handleiding

Supermicro Moederbord X7DVL-3

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7DVL-3 (91 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/91

X7DVL-3

USER’S MANUAL

Revision 1.1b

X7DVL-i

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. SuperMicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc. , you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.1b

Release Date: November 4, 2008

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of

the X7DVL-3/X7DVL-i motherboard. The X7DVL-3/X7DVL-i

supports dual Intel Xeon Quad Core/Dual Core processors (w/771 LGA) with a

front side bus speed of 667 MHz/1.066 GHz/1.333 GHz. With dual 64-bit Xeon

Quad Core/Dual Core processors built-in, the X7DVL-3/X7DVL-i offers substantial

functionality enhancements to the motherboards based on the Intel Core NetBurst

microarchitecture while remaining compatible with the IA-32 software. The fea-

tures include Intel Hyper-Threading Technology, Virtualization Technology, Hyper

Pipelined Technology, Execution Trace Cache, Thermal Monitor 1/2 (TM1/TM2),

Enhanced Intel SpeedStep technology, Advanced Dynamic Execution, Advanced

Transfer Cache, Streaming SIMD Extensions 3 (SSE3) and Extended Memory 64

Technology (EM64T). These features allow the motherboard to operate at much

higher speeds with better power management in much safer thermal environments

than the traditional motherboards. The X7DVL-3/X7DVL-i is ideal for high perfor-

mance dual processor (DP) and enterprise server environments. Please refer to

the motherboard speciﬁ cations pages on our web site (http://www.supermicro.

com/products/motherboard/) for updates on supported processors. This product is

intended to be professionally installed.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when

installing the processor, memory modules and other hardware components into

the system. If you encounter any problems, see , which describes Chapter 3

troubleshooting procedures for the video, the memory and the system setup stored

in the CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A provides BIOS POST Error Codes. andAppendix B Appendix C list

the Windows OS Installation and Other Software Installation Instructions.

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation or

to prevent damage to the components.

Note: Additional Information given to differentiate various models or to ensure cor-

rect system setup.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7DVL-3
Breedte:	305 mm
Diepte:	254 mm
Type stroombron:	ATX
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Meegeleverde software:	- Super Doctor III\n- Watch Dog\n- NMI
Aansluitingen:	8 x SAS
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	LGA 771 (Socket J)
Processorfabrikant:	Intel
Maximum intern geheugen:	24 GB
Compatibele besturingssystemen:	64-bit/32-bit
Luchtvochtigheid bij opslag:	5 - 95 procent
Netwerkfuncties:	Gigabit Ethernet
ECC:	Ja
Chipset moederbord:	Intel® 5000V
PS/2 poort(en):	2
Seriële poort(en):	1
PCI Express x8 slots:	1
LAN controller:	Intel® 82563EB
Soorten RAID:	0, 1,10
Uitbreidingsslots:	1 x 200-pin IPMI slot
PCI-slots:	1
Max. aantal SMP-processoren:	2
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
PCI-X slots:	1
Moederbord form factor:	ATX
Aantal geheugenslots:	6
Grootte BIOS-geheugen:	64 Mbit
Aansluitingen voor behuizingsventilatoren:	6
Aantal SATA-aansluitingen:	6
USB 2.0 aansluitingen:	2
Aansluiting voor diskettestation:	Ja
Chassis intrusion aansluiting:	Ja
Aantal Parallel ATA aansluitingen:	1
Grafische controller:	XGI Volari Z7 PCI-E
Soort aansluiting (2de) controller:	Intel ESB2 SATA 3.0Gbps
Soort aansluiting controller:	LSI 1068E PCI-E SAS
Ondersteunde geheugenmodule capaciteiten:	1GB, 2GB, 4GB