Supermicro X7DGT-INF Handleiding
Supermicro
Moederbord
X7DGT-INF
Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7DGT-INF (122 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/122
SUPER
X7DBT
X7DBT-INF
X7DGT
USER’S MANUAL
Revision 1.0b
X7DGT-INF
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
SUPER MICRO COMPUTER reserves the right to make changes to the product described in this
manual at any time and without notice. This product, including software, if any, and documenta-
tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any
medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE
OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL NOT
HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING
OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0b
Release Date: July 12, 2007
Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2007 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of
the X7DBT/X7DBT-INF/X7DGT/X7DGT-INF motherboard. The
X7DBT/X7DBT-INF/X7DGT/X7DGT-INF supports dual Intel Xeon 64-bit dual
core/quad core processors at a front side bus speed of 1.333 GHz, 1.066 GHz or
667 MHz. With two Xeon 64-bit dual core processors, the 5000P* or the 5000X **
chipset, and eight DDR2 FBD 667/533 memory modules built-in, the X7DBT/X7DBT-
INF/X7DGT/X7DGT-INF offers substantial functionality and performance enhance-
ments to the motherboards based on the NetBurst dual core microarchitecture
while remaining compatible with the 32-bit based software. Key features supported
include Intel's Extended Memory 64 Technology (EM64T), Hyper-Threading Tech-
nology, Enhanced Intel SpeedStep technology, Virtualization Technology, *PECI
(Platform Environment Control Interface), Advanced Dynamic Execution, Advanced
Transfer Cache, Streaming SIMD Extensions 3 (SSE3), and Thermal Monitor 2
(TM2) Technology. These features allow the motherboard to operate at much higher
speeds with better power management in much safer environments than the tradi-
tional motherboards. The X7DBT/X7DBT-INF/X7DGT/X7DGT-INF is ideal for high
performance dual processor (DP) enterprise server environments. This product is
intended to be professionally installed. (Note:*The X7DBT/X7DBT-INF supports the
5000P Chipset, and the X7DGT/X7DGT-INF supports the 5000X chipset.) **
Manual Organization
Chapter 1 describes the features, specifi cations and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when
installing the processor, memory modules and other hardware components.
Chapter 3, which describes troubleshooting procedures for the video, the memory
and the system setup stored in CMOS.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A and Appendix B provide BIOS POST Messages and POST Codes.
Appendix C, Appendix D and Appendix E list HostRAID Setup Guidelines and
Other Software Installation Instructions.
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent
catastrophic system failure or to avoid bodily injury.
Warning: Important information given to ensure proper system installation
or to prevent damage to the components.
*Note: Additional Information given to differentiate various models or to ensure
correct system setup.
iii
Preface
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | X7DGT-INF |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X7DGT-INF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024